Skip to main content
Advertisement
Browse Subject Areas
?

Click through the PLOS taxonomy to find articles in your field.

For more information about PLOS Subject Areas, click here.

  • Loading metrics

An integrated microbiological and electrochemical approach to determine distributions of Fe metabolism in acid mine drainage-induced “iron mound” sediments

  • Isabel M. Leitholf,

    Roles Conceptualization, Formal analysis, Investigation, Writing – original draft, Writing – review & editing

    Affiliation Department of Geosciences, The University of Akron, Akron, OH, United States of America

  • Chrystal E. Fretz,

    Roles Formal analysis, Investigation, Writing – review & editing

    Affiliation Department of Geosciences, The University of Akron, Akron, OH, United States of America

  • Raymond Mahanke,

    Roles Formal analysis, Investigation, Writing – review & editing

    Affiliation Department of Biology, The University of Akron, Akron, OH, United States of America

  • Zachary Santangelo,

    Roles Formal analysis, Investigation, Writing – review & editing

    Affiliation Department of Geosciences, The University of Akron, Akron, OH, United States of America

  • John M. Senko

    Roles Conceptualization, Data curation, Funding acquisition, Methodology, Project administration, Resources, Supervision, Writing – original draft, Writing – review & editing

    senko@uakron.edu

    Affiliations Department of Geosciences, The University of Akron, Akron, OH, United States of America, Department of Biology, The University of Akron, Akron, OH, United States of America, Integrated Bioscience Program, The University of Akron, Akron, OH, United States of America

Abstract

Fe(III)-rich deposits referred to as “iron mounds” develop when Fe(II)-rich acid mine drainage (AMD) emerges at the terrestrial surface, and aeration of the fluids induces oxidation of Fe(II), with subsequent precipitation of Fe(III) phases. As Fe(III) phases accumulate in these systems, O2 gradients may develop in the sediments and influence the distributions and extents of aerobic and anaerobic microbiological Fe metabolism, and in turn the solubility of Fe. To determine how intrusion of O2 into iron mound sediments influences microbial community composition and Fe metabolism, we incubated samples of these sediments in a column format. O2 was only supplied through the top of the columns, and microbiological, geochemical, and electrochemical changes at discrete depths were determined with time. Despite the development of dramatic gradients in dissolved Fe(II) concentrations, indicating Fe(II) oxidation in shallower portions and Fe(III) reduction in the deeper portions, microbial communities varied little with depth, suggesting the metabolic versatility of organisms in the sediments with respect to Fe metabolism. Additionally, the availability of O2 in shallow portions of the sediments influenced Fe metabolism in deeper, O2-free sediments. Total potential (EH + self-potential) measurements at discrete depths in the columns indicated that Fe transformations and electron transfer processes were occurring through the sediments and could explain the impact of O2 on Fe metabolism past where it penetrates into the sediments. This work shows that O2 availability (or lack of it) minimally influences microbial communities, but influences microbial activities beyond its penetration depth in AMD-derived Fe(III) rich sediments. Our results indicate that O2 can modulate Fe redox state and solubility in larger volumes of iron mound sediments than only those directly exposed to O2.

Introduction

Centuries of coal extraction in the Appalachian region of the United States has left a legacy of acid mine drainage (AMD), which remains the region’s greatest threat to surface water quality [1]. The major environmental damage caused by AMD occurs when the anoxic, acidic, and Fe(II)-rich fluid enters oxic, circumneutral streams, whereupon the higher pH enhances the oxidation of Fe(II) and precipitation of Fe(III) phases, which smother stream substrates and limit the development of robust stream ecosystems (e.g. algae, macroinvertebrates, fish; [24]). As such, removal of dissolved Fe(II) is the most pressing objective in AMD treatment and stream restoration activities [5]. In some cases, AMD flows as a 0.5–1 cm sheet over the terrestrial surface, resulting in aeration of the fluid and enhanced activities of Fe(II) oxidizing bacteria (FeOB; [611]). Continuous flow of AMD and sustained Fe(II) oxidation gives rise to massive Fe(III) (hydr)oxide deposits that are referred to as “iron mounds” or “iron terraces,” and can grow to thicknesses of meters [6, 7, 12]. While these iron mounds damage the soil and surficial systems that they cover, they may also be exploited for the treatment of AMD [611]. Under this scenario, the iron mounds represent iron removal systems, whereby the activities of FeOB induce oxidative removal of Fe from the AMD before the water enters nearby streams [611]. Notably, the iron mounds that we have encountered arise with little or no human intervention, suggesting that constructed iron mounds could serve as inexpensive and sustainable approaches to AMD treatment.

As these iron mounds grow upward, FeOB are buried in the Fe(III) (hydr)oxide phases that they produce. The dynamics of iron mound development lead to the continuous upward movement of the air-water interface, and the potential development of anoxic portions of the iron mound [12, 13]. We have noted unusual dynamics of Fe(II) oxidation and Fe(III) reduction in iron mounds, where Fe(III) reduction appears to occur in the presence of abundant O2, while Fe(II) oxidation might occur under conditions of severe O2 depletion [12, 14]. This observation may be at least partially attributable to the metabolic versatility of the acidophilic Fe-metabolizing microorganisms that inhabit the iron mounds, which are capable of Fe(II) oxidation and Fe(III) reduction (e.g. [1518]). Indeed, the microbial communities associated with the iron mounds are remarkably uniform with depth [12]. Anaerobic activities in these iron mounds are important, because they represent a mechanism for remobilization of Fe that had been previously oxidatively precipitated—an undesirable process in the context of AMD treatment [13]. However, the distributions of anaerobic activities have proven to be difficult to predict, given their (at least partial) independence from O2 availability.

To assess relationships between O2 availability and Fe(III) reduction and microbial community dynamics associated with aerobic and anaerobic processes in an iron mound setting, we incubated initially homogenized sediments from an iron mound in North Lima, OH (referred to as the Mushroom Farm) in a column format. During these incubations we assessed Fe(II) oxidation and Fe(III) reduction, as well as the associated electrochemical signatures at discrete depths over the course of incubation in the columns. At the conclusion of the incubations, the extents of O2 penetration into the columns was assessed, and the microbial community composition at various depths within the columns was determined.

Materials and methods

Sediment collection and processing

Sediments were collected from an iron mound that developed in the sheet flow area at the Mushroom Farm in North Lima, OH with permission from Northeast Oklahoma A&M College [12, 19]. Samples were collected from the top 10 cm of the iron mound sediments using alcohol-sterilized shovels and transferred to glass jars, which were sealed for transport to The University of Akron. Sediments not immediately used were refrigerated in the dark until use. All sediments were prepared for incubations by first washing them with filter-sterilized synthetic acid mine drainage (SAMD) that contains 5 mM FeSO4, 5 mM CaSO4, 1 mM Na2SO4, 0.5 mM Al2(SO4)3, 0.4 mM MnSO4, and 0.1 mM (NH4)2Fe(SO4)2 [6]. To deactivate microbiological activity for control sediment incubations, iron mound sediments were suspended in SAMD with 3% formaldehyde [6] and incubated for 12 hours. These sediments were then washed three times with sterile SAMD to remove excess formaldehyde. The sterility of the sediments was determined by spreading the sediment-SAMD suspension on solid WAYE medium [20]. Plates were incubated in the dark at room temperature and routinely examined for growth over a period of three weeks. No growth was observed, indicating that the formaldehyde treatment effectively deactivated the sediment-associated microorganisms. After initial preparation, sediments were packed into columns as described below.

Column construction and incubation setup

Columns were constructed using clear polycarbonate tubing (internal diameter = 5.1 cm), with ports drilled down the side of the tubing. The ports were sealed using a 1/8” strip of rubber packing on the interior of the column tube and 100% silicone sealant on the exterior. Each column was sealed at the bottom using a #11 black rubber stopper and wrapped with polyethylene tape. Prior to packing, columns were sterilized by autoclaving. Columns were packed with non-sterile or biologically deactivated sediment to a height of 108–115 mm (approximately 330 g wet sediment), and covered with 10 mm of SAMD, to mimic the water overlying the iron mound. No exogenous organic carbon was added to the sediments. Columns were conducted in triplicate and covered loosely with foil during incubation. When necessary, overlying SAMD was replenished with sterile deionized water to account for water lost to evaporation. Columns for anoxic incubations were carried out in duplicate sealed at the top with a rubber stopper, and the headspace was flushed with N2.

Sampling protocol and analytical techniques

Total potential (TP) measurements were collected by inserting 13 mm x 27G Pt-Ir sub-dermal needle electrodes (Technomed-Europe; Maastricht-Airport, Netherlands) into the sampling ports arrayed along the side of the column. These electrodes were connected to a Keithley model 2000 digital multi-meter (internal resistance > 10 GΩ) with 10-channel expansion card and an Ag/AgCl reference electrode, which was placed in the SAMD at the top of the column. For anoxic incubations, the rubber stopper at the top of the columns was removed, and the headspace was continuously flushed with N2 while the reference electrode was inserted in the overlying SAMD. We address use of the term “total” with respect to these potential measurements in the Discussion section. Porewater samples were collected from side sampling ports using needles and syringes, and solids were removed from the liquid by centrifugation. Samples were then preserved in 0.5 M HCl before measurement of dissolved Fe(II) by ferrozine assay [21]. Theoretical EH were calculated using WEB-PHREEQ [22] with the PHREEQC database [23] using the measured Fe(II) concentrations and SAMD chemistry. Since goethite was the predominant solid phase in sediments (S1 Fig), a dissolved Fe3+ concentration of 2.28 × 10−3 mM (based on the solubility of goethite at pH 1.5 in non-sterile incubations) and 4.04 × 10−7 (based on the solubility of goethite at pH 2.75 in biologically deactivated incubations) was assumed.

At the conclusion of the incubations, dissolved oxygen and pH measurements at 1 mm depth increments were collected using a Unisense Microsensor Multimeter Microprofiling system (version 2.01; Unisense A/S, Aarhus, Denmark); OX-N, PH-N) with Sensor Trace PRO 3.1.1 microprofiling software and pH-N (pH) and OX-N (DO) electrodes. Columns were then disassembled by cutting the polycarbonate tubing laterally and opening the half-columns. Sediments were then removed from the columns at 1 cm depth increments, and processed for further analyses. Sediment samples that were collected at this time and were intended for nucleic acid-based microbial community analysis were placed in sterile tubes and stored at -80° before DNA extraction (described below). Water content of the sediments was determined gravimetrically, and sediment-associated sulfate was determined by extracting sediment-associated and porewater sulfate with nanopure water, followed by centrifugation and quantification of sulfate in the supernatant by ion chromatography using a Dionex (Thermo Fisher Scientific Inc. Sunnyvale, CA) Basic Integrated IC System with an IonPac AS22 column and conductivity detector. Total sediment-associated carbon was quantified using a PerkinElmer 2400 Series II CHNS/O Analyzer (PerkinElmer, Inc. Waltham, MA). For x-ray powder diffraction (XRD), sediments were dried in an anaerobic chamber and analyzed using a Rigaku Ultima IV x-ray diffractometer with CuKα radiation, scanning at 2Θ of 2–70°, and accelerating voltage of 40 kV at 35 mA.

Nucleic acid-based microbial community characterization

Before DNA extraction, Fe(III) was removed from sediments by washing with 0.3 M ammonium oxalate, with the pH adjusted to 3 with oxalic acid [24]. DNA was extracted from the Fe(III)-free material using MoBio PowerBiofilm DNA isolation kits (MoBio Laboratories, Inc. Carlesbad, CA). Partial 16S rRNA gene sequences were determined at Molecular Research LP (Shallowater, TX) by Illumina MiSeq sequencing, where 515F and 806R primers were used to amplify DNA through a 28 cycle PCR with HotStarTaq Plus Master Mix Kit (Qiagen USA, Valencia, CA) with melting at 94° for 3 min, then 28 cycles of 94° for 30 sec, 53° for 40 sec, and 72° for 1 min, followed by a 5 min elongation step at 72°. Samples were pooled and the Illumina DNA library was prepared from calibrated Ampure XP bead-purified samples. DNA was sequenced by Illumina MiSeq (San Diego, CA) following the manufacturer’s instructions. Sequences were joined and barcodes were depleted, short (<150 bp) sequences or those with unreliable base calls were removed, and the sequences were then denoised and chimeras were removed.

Sequence libraries were then further processed and analyzed in the MacQIIME environment (http://www.wernerlab.org/software/macqiime) using QIIME scripts [25]. Operational taxonomic units (OTUs) were picked de novo based on 97% sequence similarity, and assigned to taxonomic groups using the RDP classifier 2.2 with the SILVA database [2629]. OTUs were aligned to the SILVA database using the PyNAST algorithm [30], and a phylogenetic tree was constructed. Distance matrices were constructed using the weighted UniFrac metric [31, 32], with iterative rarefaction to 68,665 sequences (75% of the number of sequences in the smallest library) with jack-knife sampling of the OTU table performed before UniFrac analysis. Unweighted pair group method with arithmetic mean (UPGMA) trees based on the produced distance matrices were then constructed using UniFrac [32]. Sequence libraries from this work have been deposited in the Sequence Read Archive under project number PRJNA490562.

Results

Column chemistry

To evaluate the dynamics of biogeochemical gradient development in iron mound sediments, columns were assembled with homogenized iron mound sediments, so that the biology and chemistry of the columns would be initially uniform throughout, and we could then visualize gradient development. In biologically deactivated sediment-containing columns, minimal Fe(II) accumulation was observed at any depth interval within the columns (Fig 1A). The observable Fe(II) accumulation may have been attributable to desorption of Fe(II) from the sediments as the sediments equilibrated with SAMD. Total potentials (TP) in inactive sediment incubations were initially lower than those of the non-sterile incubations, but approached those of the non-sterile incubations and slightly exceeded those of the theoretical EH (based on the Fe2+/Fe3+ couple) after approximately 50 d (Fig 1D, 1E, and 1G). TP also remained the same with depth throughout the incubations, indicating that no electrochemical gradients developed over the course of the deactivated incubations (Figs 1D and 2B). EH predicted by Fe(II) concentration were generally unchanged throughout the incubations and exhibited minor variation with depth (Fig 1G).

thumbnail
Fig 1.

Fe(II) concentrations (A-B), measured total potentials (TP; D-F), and theoretical EH (G-I) at various depths in column incubations containing formaldehyde-deactivated (panels A, D, and G), non-sterile continuously oxic (panels B, E, and H), and non-sterile, initially anoxic (panels C, F, and I) iron mound sediments. Depths represent the midpoint of a depth interval of 5 mm, with the sediment-water interface at 0 mm. Gray shading in panels C, F, and I represents the time period during which the headspace of column incubations was N2 (with air subsequently allowed into the incubations). As a guide, cooler colors represent measurements in shallower portions of the columns, while warmer colors represent deeper portions. Error bars represent one standard deviation.

https://doi.org/10.1371/journal.pone.0213807.g001

In non-sterile column incubations, an Fe(II) gradient developed in the first 50 d of incubation, with maximal dissolved Fe(II) concentrations of approximately 120 mM in the deepest portion of the columns due to Fe(III) reduction (Fig 1B). Early in the incubations, we observed an initial separation in TP values, with an increase in TP in the shallower sediments, and decrease in the TP of deeper sediments (Fig 1E). This split occurred concurrently with the accumulation of Fe(II) in the deeper portions of the sediments (Fig 1B and 1E). Following the initial peak in TP of shallow sediments at approximately 10 d, the TP of the shallower sediments decreased, which appears to have been due to upward diffusion of Fe(II) or reduction of easily reducible Fe(III) phases in the shallower sediments, as Fe(II) concentrations increased during this period of TP decrease (Fig 1B and 1E). TP patterns can be partially attributed to variation in Fe(II) concentration, because theoretical EH patterns of shallower sediments exhibited qualitatively similar patterns to the observed TP (Fig 1E and 1H). TP of sediments below 30 mm in depth did not exhibit the increase, followed by decrease and subsequent increase in TP as was observed in the shallower sediment (i.e. ≥33 mm). Rather, the TP of these sediments decreased proportionally to their depth in the first 25 d of incubation and then gradually increased (Fig 1E). Taken together, these observations indicate that the TP is partially explained by the influence of the Fe2+/Fe3+ couple on the redox potential column porewater, but the TP is incompletely explained by EH.

At the conclusion of these incubations, we measured DO and pH of the upper 40 mm of the incubations (a limitation of the electrode length). In sterile incubations, the pH of the upper portion of the incubations was uniformly approximately 2.5 (Fig 2D). The initial pH of the SAMD was 3.1, and the observed decrease was likely attributable to minor amounts of abiotic Fe(II) oxidation, and hydrolysis of Fe3+. Any abiotic Fe(II) oxidation could be supported by O2 that diffused throughout the upper 40 mm of the sediments, and likely through the entire column (Fig 2A). TP and dissolved Fe(II) concentration were uniform throughout the biologically-inactive sediment columns at the conclusion of the incubations (Fig 2C). In non-sterile incubations, DO decreased in the upper 10 mm of the sediment column, and was completely depleted (detection limit 0.3 μM) below 20 mm (Fig 2C). In this portion of the column, TP decreased, and then remained nearly constant throughout the remaining depth, where the most robust Fe(III) reduction occurred (Fig 2A and 2B). This constant TP was observed despite substantial Fe(II) accumulation in the deeper, anoxic portions of the columns, which would induce lower TP (dependent on the Fe2+/Fe3+ couple; EH) than we observed (Fig 1E and 1H). Indeed, a linear Fe(II) gradient was observed with depth, that did not correspond to the measured TP (Fig 2A and 2B). Based on TP measurements, it appears that the upper 20 mm of the columns were where the most dramatic aerobic Fe(II) oxidation was occurring, and that activity was supported by the relatively low concentration of O2 that was available.

thumbnail
Fig 2.

Depth profiles of dissolved Fe(II) (Fe(II)aq; A), total potential (TP; B), dissolved oxygen concentrations (DO; C), pH (D), and phylum-level microbial community composition (E) at the conclusion of non-sterile (○) and formaldehyde-deactivated (●) column incubations that were incubated under continuously oxic conditions. The colored shading across panels A-D indicates depth intervals corresponding to data points shown in Fig 1, and the color key for panel E is shown on the left side of the figure. The bar outlined in red in panel E represents the composition of the core microbiome of the entire column. Error bars represent one standard deviation.

https://doi.org/10.1371/journal.pone.0213807.g002

Sediment sulfate concentration (including dissolved and solid-associated) was 0.25 mmol/g (dry) and was consistent through the depth of sediments. Further, sediments were uniformly dominated by goethite throughout the columns at the conclusion of the incubations (S1 Fig), and no blackening of the sediments was observed. While we cannot rule out the possibility of cryptic sulfur cycling that supported Fe(III) reduction (whereby inorganic S species act as electron shuttles to Fe(III) [33, 34]), sulfate was not an important electron sink in comparison to Fe(III). Organic carbon (OC) concentration of the sediments was 6.5 mg/g (dry) sediment, which is consistent with OC contents of the Mushroom Farm sediments reported by Brantner et al. [12]. Organic carbon in the Mushroom Farm sediments is mostly derived from phototrophic microeukaryotic biomass and likely supported Fe(III) reduction in the sediment incubations [12]. As with sulfate concentration, OC was uniform throughout the depth of the columns at their conclusion.

To further evaluate the relationship between Fe(II) and TP, we incubated columns under anoxic conditions. During the period of anoxic incubation, Fe(II) accumulated to similar levels, regardless of depth, and TP diminished consistently with theoretical EH during this period (Fig 1C, 1F and 1I). Upon introduction of atmospheric O2 to the headspace of the columns, Fe(III) reduction was arrested in the shallower portions of the column, but it continued in deeper portions of the column (Fig 1C). During this period of Fe(II) oxidation, the TP of shallower portions of the columns increased, and so did that of the deeper portions of the columns, despite continued Fe(III) reduction (Fig 1F). As was the case in the first set of column incubations, this increase in TP was not predicted in EH based on Fe(II) concentrations (Fig 1I). Indeed, after reintroduction of atmospheric oxygen, the TP of the sediments developed similar patterns to those observed in the sediments incubated under oxic conditions throughout the incubation period (Fig 1E and 1F).

Column sediment microbial communities

At the conclusion of the 120 d incubations, we conducted 16S rRNA gene-based surveys of microbial communities at discrete depths in the columns. Average read length of partial 16S rRNA gene sequences was 299 bp and the number of sequences recovered from each depth ranged from 91,553 to 157,653. Despite differences in activities at different depths in the column incubations, we observed little variability among the microbial communities with depth. Shannon indices of all of the depth intervals were nearly identical (5.9–6.1) (S2 Fig). Given the chemical gradients that developed over the course of the incubations, we would expect development of unique microbial communities in terms of relative abundances. This was the case to some extent, as the community in the top 10 mm could be distinguished from those of the rest of the column using the weighted UniFrac metric, but the communities from the remainder of the depths could not be distinguished from each other (S2 Fig).

When viewed compositionally at the phylum level, microbial communities were composed predominantly of Gammaproteobacteria and unassignable phylotypes as determined using the Ribosomal Database Project’s taxonomic assignment algorithm (Fig 2E).

Aside from a higher relative abundance of unassignable OTUs in the top 10 mm of the column, microbial communities varied little with depth (Fig 2E). Computation of the core microbiome (OTUs that are represented in all samples, and excluding any OTUs that are not included in all samples) in QIIME yielded a phylum-level taxonomic distribution pattern that was nearly identical to those observed in depth intervals between 10 mm and 110 mm (Fig 2E). Examination of the sequence libraries at greater taxonomic resolution revealed that 24 OTUs comprised approximately 75% of the total communities of the sediments at the conclusion of the incubations (Table 1). Even though visualizing microbial communities at the phylum level could mask variation in community composition, this was not the case in our incubations. The predominant OTUs in each phylum were consistently predominant throughout the columns. For example, the OTU attributable to Xanthomonadaceae comprised approximately 50% of the Gammaproteobacterial OTU at all depths of the column (Table 1). Nearly all of these abundant OTUs had the greatest similarity with sequences in the NCBI database that were recovered from AMD-impacted systems (Table 1), including the unassignable sequences, two of which were most similar to sequences detected in the Rio Tinto AMD system [35]. While the unassignable sequences were not similar to any cultured organisms, all but one of the OTUs with greater than 90% sequence similarity to cultivated organisms were attributable to acidophilic organisms from AMD-impacted systems, and all but three of these metabolize Fe (Table 1). Several of these Fe-metabolizing microorganisms are capable of both Fe(II) oxidation and Fe(III) reduction (Table 1). The most abundant phylotype detected in the columns was a Xanthomonadaceae, related to Metallibacterium scheffleri, which is an acidophilic organotrophic FeRB [36]. While M. scheffleri is not known to oxidize Fe(II), several other closely related Xanthomonadaceae-affiliated acidophiles have been shown to exploit aerobic Fe(II) oxidation for growth [37]. Our analysis of the microbial communities associated with the columns revealed relatively uniform composition of communities in sediments below 10 mm, and a narrow group of organisms (the unassigned OTUs) that were represented in greater proportions in the top 10 mm of the sediment incubations.

thumbnail
Table 1. Comparison (using BLASTn; [65]) of sequences recovered from iron mound sediment incubations to sequences contained in the GenBank database.

Most closely-related 16S rRNA gene sequences from culture-independent surveys and microorganisms in culture are shown. OTUs comprising >5% of a given phylum were selected for analysis and included in the table.

https://doi.org/10.1371/journal.pone.0213807.t001

Discussion

O2 availability, controlled by depth in the columns, minimally influenced the composition of microbial communities in iron mound sediments, but profoundly influenced their activities. The only phylotypes that exhibited a substantial change with depth at the conclusion of the column incubations were unassigned sequences that were similar to planktonic phylotypes observed in acidic (pH approximately 2) and high redox potential (approximately 470 mV) Rio Tinto, indicating that these organisms metabolize optimally under mostly oxic conditions [35, 38]. Otherwise, microbial communities throughout the remainder of the sediments were nearly identical (Fig 2E and S2 Fig). 16S rRNA gene-based surveys can still detect inactive organisms, which could explain the compositional similarities we have observed. In previous experiments at the Mushroom Farm, we have observed discernable shifts in microbial communities over shorter incubation times [9]. Additionally, a similar pattern of microbial community composition was observed in intact iron mound microbial communities [12]. In that case, relative abundances of phylotypes attributable to photosynthetic microeukaryotes and obligately aerobic, Fe(II) oxidizing Gallionella sp. diminished in deeper portions of the sediments, but other components of the microbial communities retained similar relative abundances [12]. The most notable constants in situ were Gammaproteobacteria assignable to Fe-metabolizing Xanthomonadaceae [12], which also remained abundant at the conclusion of our column incubations (Fig 2E). These observations illustrate the metabolic versatility of microorganisms with respect to Fe metabolism in AMD and AMD-impacted systems. They are often capable of Fe(II) oxidation and Fe(III) reduction, depending to some extent (but not completely) on the availability of O2 [14, 37, 3941]. In the current work, we started with a homogenized microbial community from the upper 6 cm of an iron mound and challenged that community to adjust to limitations on O2 delivery. The communities did not vary dramatically from a compositional perspective, but exhibited dramatic differences in their activities.

Despite the consistency in community composition, the microbial activities over the course of the incubations were dramatically different at different depths, with extensive Fe(III) reduction in the deeper portions of the columns (Figs 1 and 2). O2 was completely depleted from the sediments at depth where Fe(III) reduction did not occur to its maximal extent (Fig 2A and 2C). In other words, the extent of Fe(II) accumulation (indicative of Fe(III) reduction) followed a gradient that was not dependent on O2 availability: less Fe(III) reduction was apparent at 57 mm than at 97 mm, despite complete depletion of O2 at 33 mm (Figs 1B and 2A and 2C). Similarly, addition of O2 to the initially anoxic incubations arrested Fe(III) reduction in a depth-dependent manner, and not exclusively in the shallower sediments (Fig 1C). It is not clear if Fe(II) oxidation was occurring in the anoxic sediments or if extremely low O2 concentrations (i.e. below the detection limit of 0.3 μM) are supporting extensive Fe(II) oxidation [42, 43]. It appears unlikely Fe(III) reduction was simply partially inhibited in the shallower sediments, because addition of air to the initially anoxic incubations led to Fe(II) oxidation in deeper sediments (Fig 1C).

Some insight into the conditions that could allow O2 to influence Fe(III) reduction or Fe(II) oxidation despite separation of these two species can be gained from examination of our electrochemical measurements. Electrochemical or geophysical approaches are increasingly deployed to interrogate (bio)geochemical processes in field settings and evaluate spatial distributions of microbiologically-induced redox processes [4447]. The redox potential (EH) of a given solution is the potential between a non-polarizable reference electrode and a polarizable electrode in close proximity to each other and is indicative of the capacity for a solution to accept or donate electrons relative to the standard hydrogen electrode (SHE [48]). The self-potential (SP), which is widely used in geophysical surveys, represents the potential difference between two spatially-separated non-polarizable electrodes (one stationary, and one movable) and is indicative of electric current between relatively reducing and oxidizing regions or an electrochemical gradient [44, 4852]. If a stationary non-polarizable electrode is deployed with a movable polarizable electrode, the resulting potential is referred to as total potential (TP), and represents the sum of the EH and SP between the two electrodes [48]. By deploying PtIr electrodes along the column coupled with a Ag/AgCl reference electrode in the overlying SAMD, our measurements constitute the TP at various depths within the columns.

Values shown in Fig 1G–1I represent the theoretical EH for the sediments based on the Fe2+/Fe3+ couple using Fe(II) concentrations from the respective experiments. It is likely that O2 also contributes to the EH component of the TP. For instance, O2 was relatively high throughout the deactivated column sediments (Fig 2C), so the H2O/O2 redox couple could have influenced TP in addition to the Fe2+/Fe3+ couple. Indeed, TP were higher than predicted based on the Fe2+/Fe3+ redox couple (Fig 1D and 1G). However, at the DO in the deactivated columns at the conclusion of the incubations, the theoretical EH was 0.96 V. Therefore, while O2 clearly contributed to TP in regions where it was present, it appears that the Fe2+/Fe3+ redox couple exerted the most control on the EH component of TP throughout the columns. Additionally, since we could not detect evidence of sulfate reduction in these incubations, the Fe2+/Fe3+ redox couple would predominantly drive EH in the sediments. The measured TP do not necessarily constitute EH, since the non-polarizable and polarizable electrodes are spatially separated from each other, but the calculated EH (based on Fe(II) concentration) and measured TP of the formaldehyde-deactivated incubations match reasonably well (Fig 1D and 1G), as do the EH and TP during anoxic incubations (gray-shaded part of Fig 1F and 1I). Qualitatively, in both of the non-sterile incubations, shallower sediments, with lower Fe(II) concentrations and greater rates and extents of Fe(II) oxidation exhibited higher TP and EH (Fig 1B, 1C, 1E, 1F, 1H and 1I and Fig 2A and 2B). The higher EH is consistent with lower Fe(II) concentration, and perhaps higher dissolved Fe3+ concentration. For instance, the higher-than-predicted TP in overlying AMD and shallow sediments (Fig 1E and 1H) could be attributable to accumulation of Fe3+ exceeding its maximum solubility in the oxic portions of the columns where Fe(II) oxidation is most robust. Overall, these observations illustrate the contribution of redox potential, as controlled by the Fe2+/Fe3+ redox couple, to the TP measured in these incubations.

EH calculations did not predict the continuous increase in TP at all depths in the incubations after approximately 20 d (Fig 1E and 1H). They also did not predict the increase in TP upon addition of O2 to initially anoxic incubations (Fig 1F and 1I). If based exclusively on Fe(II) concentration, these observed TP would predict a decrease in Fe(II) concentration, which was not the case. In fact, Fe(II) concentrations segregated further with depth as the TP increased (Fig 1B and 1E). An explanation for the observed increase in TP in anoxic incubations could be opposing gradients of Fe2+ and Fe3+, where a high rate of Fe(II) oxidation in shallow, oxic portions of the column induced the Fe(II) gradients that we observed, while downward diffusion of Fe3+ from the oxic zone to the oxic zone induced the increase in TP. However, the rate of Fe(III) reduction during the anoxic period of the incubations (3.7 mM/d, based on Fe(II) accumulation) exceeded the rate of Fe(II) oxidation in the shallowest sediments (0.97 mM/d, based on Fe(II) depletion) after O2 was allowed into the columns (Fig 1F). This pattern of Fe(II) oxidation and Fe(III) reduction rates would result in a steep Fe(II) gradient near the oxic-anoxic interface, and not the gradual Fe(II) gradient from the top to the bottom of the column that we observed here (Fig 2). While TP and predicted EH closely matched during the anoxic period of the short-term incubations, upon introduction of O2 to the headspace, the TP increased at all depths, and Fe(II) concentrations segregated based on depth in the columns (Fig 1C, 1F and 1I). These inconsistencies between the TP and EH when O2 is available at the top of the columns can be attributed to the SP contribution to TP [48], and suggest an electron transfer process occurring in the sediments due to the electrochemical pull of O2 overlying the sediments.

Both field- and laboratory-scale electrochemical/geophysical surveys of SP signals have illustrated the development of SP signals across regions that connect high and low EH regions as we have observed here [45, 51, 52]. In order to facilitate the electron transfer that gives rise to SP signals in sediments, it has been suggested that a perhaps disorderly, but integrated network of microorganisms, extracellular material, and redox-active solid phases gives rise electron transfer [45, 52, 53]. Such a model could function quite well in iron mound settings, as the sediments are composed almost exclusively of Fe(III) (hydr)oxide phases [6, 7, 10, 12], and these phases could facilitate the electron transfer processes [5464], with opposing Fe(II) and O2 concentration gradients providing the driving force for electron transfer.

Our results are consistent with previous field and laboratory observations of a gap between intrusion of O2 into the sediments and the zone of Fe(II) oxidation, where an O2 intrusion front and Fe(II) oxidation zone were spatially separated [12, 14]. This work has allowed us to visualize the microbially-mediated development of these gradients in the iron mound sediments and apply electrochemical approaches to assess biogeochemical processes within the sediments. Our results indicate that the chemical and microbiological influence of O2 in iron mound sediments exceeds its actual penetration into the sediments. Notably, Fe(II) accumulation in deeper sediments was suppressed despite no O2 availability. If engineered iron mounds are to be used for oxidative precipitation and removal of Fe(II) from AMD [810], our results indicate that the longer range influence of O2 into the sediments could minimize reductive re-release of Fe(II) from the sediments.

Supporting information

S1 Fig. Powder X-ray diffraction patterns of sediments collected from columns at the conclusion of non-sterile 120 d incubations.

The reference diffraction pattern of goethite in the top panel is from The American Mineralogist Crustal Structure Database [Downs TR, Hall-Wallace M. Am Mineral 2003; 88:247–250.].

https://doi.org/10.1371/journal.pone.0213807.s001

(DOCX)

S2 Fig. PCoA of microbial communities associated with different depths of iron mound sediment incubations at the conclusion of the incubations (120 d) using the weighted and Unifrac metric [Lozupone CA,Hamady M, Kelly ST, Knight R.

Appl Environ Microbiol 2007; 73: 1576–1585.]. Values in parentheses in depth legend indicate Shanon Indices of microbial communities at each of those depths. Values in parentheses of axis labels indicate the percentage of variation explained by a PCo.

https://doi.org/10.1371/journal.pone.0213807.s002

(DOCX)

Acknowledgments

This work was supported by National Science Foundation EAR Geobiology and Low Temperature Geochemistry Program award number 0851847. We thank John Burwick for assistance with DO and pH profiling, Hae Nim Cho for assistance with column sampling and analyses, and Kimberly Landreth and Nicholas Wander for assistance with DNA extraction from sediments. We thank John Wilson and Northeast Oklahoma A & M College for granting us access to the Mushroom Farm for sediment collection. We thank the anonymous reviewers of this manuscript for their constructive comments on the manuscript. RM performed this work while a student at the Akron Public Schools’ National Inventors Hall of Fame High School.

References

  1. 1. Giam X, Olden JD, Simberloff D. Impact of coal mining on stream biodiversity in the US and its regulatory implications. Nature Sustain 2018; 1: 176–183.
  2. 2. Short TM, Black JA, Birge WJ. Effects of acid-mine drainage on the chemical and biological character of an alkaline headwater stream. Arch Environ Contam Toxicol 1990; 19: 241–248.
  3. 3. Schorr MS, Backer JC. Localized effects of coal mine drainage on fish assemblages in a Cumberland Plateau stream in Tennessee. J Freshwater Ecol 2006; 21: 17–24.
  4. 4. Smucker NJ, Vis ML. Acid mine drainage affects the development and function of eplilithic biofilms in streams. J N Am Benthol Soc 2011; 30: 728–738.
  5. 5. Johnson DB, Hallberg KB. Acid mine drainage remediation options: a review. Sci Tot Environ 2005; 338: 3–14.
  6. 6. Senko JM, Wanjugi P, Lucas M, Bruns MA, Burgos WD. Characterization of Fe(II) oxidizing bacterial activities and communities at two acidic Appalachian coalmine drainage-impacted sites. ISME J 2008; 2: 1134–1145. pmid:18548117
  7. 7. Brown JF, Jones DS, Mills DB, Macalady JL, Burgos WD. Application of a depositional facies model to an acid mine drainage site. Appl Environ Microbiol 2011; 77: 545–554. pmid:21097582
  8. 8. Gouin M, Saracusa E, Clemons CB, Senko J, Kreider KL, Young GW. A mathematical model of a passive scheme for acid mine drainage remediation. Int J Geomath 2013; 4: 27–53.
  9. 9. Brantner JS, Senko JM. 2014. Response of soil-associated microbial communities to intrusion of coal mine-derived acid mine drainage. Environ Sci Technol 2014; 48: 8556–8563. pmid:24971467
  10. 10. Grettenberger CL, Pearce AR, Bibby KJ, Jones DS, Burgos WD, Macalady JL. Efficient low-pH iron removal by a microbial iron oxide mound ecosystem at Scalp Level Run. Appl Environ Microbiol 2017; 83: e00015–17. pmid:28087535
  11. 11. Sheng Y, Kaley B, Bibby K, Grettenberger C, Macalady JL, Wang G, et al. Bioreactors for low-pH iron(II) oxidation remove considerable amounts of total iron. RSC Adv 2017; 7: 35962.
  12. 12. Brantner JS, Haake ZJ, Burwick JE, Menge CM, Hotchkiss ST, Senko JM. Depth-dependent geochemical and microbiological gradients in Fe(III) deposits resulting from coal mine-derived acid mine drainage. Front Microbiol 2014; 5: 215. pmid:24860562
  13. 13. Senko JM, Bertel D, Quick TJ, Burgos WD. The influence of phototrophic biomass on Fe and S redox cycling in an acid mine drainage-impacted system. Mine Wat Environ 2011; 30: 38–46.
  14. 14. Burwick JE, Sharma S, Parker C, Menge CM, Buldum A, Senko JM. The influence of O2 availability and Fe(III) mineralogy on Fe metabolism by an acidophilic bacterial culture. Chem Geol 2017; 457: 107–117.
  15. 15. Johnson DB, McGinness S. Ferric iron reduction by acidophilic heterotrophic bacteria. Appl Environ Microbiol 1991; 57: 207–211. pmid:16348395
  16. 16. Pronk JT, de Bruyn JC, Bos P, Kuenen JG. Anaerobic growth of Thiobacillus ferrooxidans. Appl Environ Microbiol 1992; 58: 2227–2230. pmid:16348735
  17. 17. Küsel K, Dorsch T, Acker G, Stackengrandt E. Microbial reduction of Fe(III) in acidic sediments: isolation of Acidiphilium cryptum JF-5 capable of coupling reduction of Fe(III) to oxidation of glucose. Appl Environ Microbiol 1999; 65: 3633–3640. pmid:10427060
  18. 18. Hedrich S, Schlömann M, Johnson DB. The iron-oxidizing proteobacteria. Microbiology 2011; 157: 1551–1564. pmid:21511765
  19. 19. Cutright TJ, Senko J, Sivaram S, York M. Evaluation of the phytoextraction potential at an acid-mine-drainage-impacted site. Soil Sed Contam 2012; 21: 970–984.
  20. 20. Johnson DB. Selective solid media for isolating and enumerating acidophilic bacteria. J Microbiol Meth 1995; 23: 205–218.
  21. 21. Stookey LL. Ferrozine–a new spectrophotometric reagent for iron. Anal Chem 1970; 42: 779–801.
  22. 22. Saini-Eidukat B, Yahin A. Web-phreeq: a WWW instructional tool for modelling the distribution of chemical species in water. Computers Geosci. 1999; 25: 347–353.
  23. 23. Parkhurst DL, Appelo CAJ. 2013, Description of input and examples for PHREEQC version 3 –a computer program for speciation, batch reaction, one-dimensional transport and inverse geochemical calculations: US Geological Survey Techniques and Methods, gook 6, ch. A43, 497 p.
  24. 24. Nicomrat D, Dick WA, Tuovinen OH. Assessment of the microbial community in a constructed wetland that receives acid coal mine drainage. Microbiol Ecol 2006; 51: 83–89.
  25. 25. Caporaso JG, Kuczynski J, Stombaugh J, Bittinger K, Bushman FD, Costello EK, et al. QIIME allows analysis of high-throughput community sequencing data. Nat Methods 2010; 7: 335–336. pmid:20383131
  26. 26. Wang Q, Garrity GM, Tiedje JM, Cole JR. Naive bayesian classifier for rapid assignment of rRNA sequences into the new bacterial taxonomy. Appl Environ Microbiol 2007; 73: 526–5267.
  27. 27. Edgar RC. Search and clustering orders of magnitude faster than BLAST. Bioinformatics 2010; 26: 2460–2461. pmid:20709691
  28. 28. Werner JJ, Koren O, Hugenholtz P, DeSantis TZ, Walters WA, Caporaso JG, et al. Impact of training sets on classification of high-throughput bacterial 16s rRNA gene surveys. ISME J 2012; 6: 94–103. pmid:21716311
  29. 29. Quast C, Pruesse E, Yilmaz P, Gerken J, Schweer T, Yarza P, et al. The SILVA ribosomal RNA gene database project: improved data processing and web-based tools. Nucl Acid Res 2013; 41: D590–D596.
  30. 30. Caporaso JG, Bittinger K, Bushman FD, DeSantis TZ, Anderson GL, Knight R. PyNAST: a flexible tool for aligning sequences to a template alignment. Bioinformatics 2010; 26: 266–267. pmid:19914921
  31. 31. Lozupone CA, Knight R. UniFrac: a new phylogenetic method for comparing microbial communities. Appl Environ Microbiol 2005; 71: 8228–8235. pmid:16332807
  32. 32. Lozupone CA,Hamady M, Kelly ST, Knight R. Quantitative and qualitative β diversity measures lead to different insights into factors that structure microbial communities. Appl Environ Microbiol 2007; 73: 1576–1585. pmid:17220268
  33. 33. Hansel CM, Lentini CJ, Tang Y, Johnston DT, Wankel SD, Jardine PM. Dominance of sulfur-fueled iron oxide reduction in low-sulfate freshwater sediments. ISME J 2015; 9: 2400–2412. pmid:25871933
  34. 34. Mills JV, Antler G, Turchyn AV. Geochemical evidence for cryptic sulfur cycling in salt marsh sediments. Earth Plant Sci Lett 2016; 453: 23–32.
  35. 35. Amaral-Zettler L, Zettler ER, Theroux SM, Palacios C, Aguilera A, Amils R. Microbial community structure across the tree of life in the extreme Río Tinto. ISME J 2011; 5: 42–50. pmid:20631808
  36. 36. Ziegler Z, Waidner B, Itoh T, Schumann P, Spring S, Gescher J. Metallibacterium scheffleri gen. nov., sp. nov., an alkalinizing gammaproteobacterium isolated from an acidic biofilm. Int J Syst Evo Microbiol 2013; 63: 1499–1504.
  37. 37. Wu X, Wong ZL, Sten P, Engblom S, Österholm P, Dopson M. Microbial community potentially responsible for acid and metal release from an Ostrobothnian acid sulfate soil. FEMS Microbiol Ecol 2013; 84: 555–563. pmid:23369102
  38. 38. Palacios C, Zettler E, Amils R, Amaral-Zettler L. Contrasting microbial community assembly hypotheses: a reconciling tale from the Río Tinto. PLOS ONE 2008; 3: e3853. pmid:19052647
  39. 39. Küsel K, Roth U, Drake HL. Microbial reduction of Fe(III) in the presence of oxygen under low pH conditions. Environ Microbiol 2002; 4: 414–421. pmid:12123477
  40. 40. Johnson DB, Hallberg KB. Carbon, iron, and sulfur metabolism in acidophilic micro-organisms. Adv Microbial Physiol 2009; 54: 201–255.
  41. 41. Lu S, Gischkat S, Reiche M, Akob DM, Hallberg KB, Küsel K. Ecophysiology of Fe-cycling bacteria in acidic sediments. Appl Environ Microbiol 2010; 76: 8174–8183. pmid:20971876
  42. 42. Druschel GK, Emerson D, Sutka R, Suchecki P, Luther III GW. Low-oxygen and chemical kinetic constraints on the geochemical niche of neutrophilic iron(II) oxidizing microorganisms. Geochim Cosmochim Acta 2008; 72: 3358–3370.
  43. 43. Emerson D, Fleming EJ, McBeth JM. Iron-oxidizing bacteria: an environmental and genomic perspective. Annu Rev Microbiol 2010; 64: 561–583. pmid:20565252
  44. 44. Hamilton SM, Cameron EM, McClenaghan MB, Hall GEM. Redox, pH and SP variation over mineralization in thick glacial overburden. Part I: methodologies and field investigation at the March Zone gold property. Geochem Explor Environ A 2004; 4: 33–44.
  45. 45. Naudet V. Revil A. A sandbox experiment to investigate bacteria-mediated redox processes on self-potential signals. Geophys Res Lett 2005; 32: L11405.
  46. 46. Williams KH, Hubbard SS, Banfield JF. Galvanic interpretation of self-potential signals associated with microbial sulfate-reduction. J Geophys Res 2007; 112: G03019.
  47. 47. Regberg A, Singha K, Tien M, Picardal F, Zheng Q, Schieber J, et al. Electrical conductivity as an indicator of iron reduction rates in abiotic and biotic systems. Wat Resource Res 2011; 47: W04509.
  48. 48. Timm F, Möller P. The relation between electric and redox potential: evidence from laboratory and field measurements. J Geochem Explor 2001; 72: 115–128.
  49. 49. Sato M, Mooney H. The electrochemical mechanisms of sulfide self-potentials. Geophysics 1960; 25: 226–249.
  50. 50. Hamilton SM, Cameron EM, McClenaghan MB, Hall GEM. Redox, pH and SP variation over mineralization in thick glacial overburden. Part II: field investigation at Cross Lake VMS property. Geochem Explor Environ A 2004b; 4: 5–58.
  51. 51. Naudet V, Revil A, Bottero J-Y, Bégassat. Relationship between self-potential (SP) signals and redox conditions in contaminated groundwater. Geophys Res Lett 2003; 30: HLS2.
  52. 52. Revil A, Mendonça CA, Atekwana EA, Kulessa B, Hubbard SS, Bohlen KJ. Understanding biogeobatteries: where geophysics meets microbiology. J Geophys Res 2010; 115: G00G02.
  53. 53. Ntarlagiannis D, Atekwana EA, Hill EA, Gorby Y. Microbial nanowires: is the subsurface “hardwired”? Geophys Res Lett 2007; 34: L17305.
  54. 54. Silvester A, Charlet L, Tournassat C, Géhin A, Grenèche J-M, Liger E. Redox potential measurements and Mössbauer spectrometry of FeII adsorbed onto FeIII (oxyhydr)oxides. Geochim Cosmochim Acta 2005; 69: 4801–4815.
  55. 55. Yanina SV, Ross KM. Linked reactivity at mineral-water interfaces through bulk crystal conduction. Science 2008; 320: 218–222. pmid:18323417
  56. 56. Rosso KM, Yanina SV, Gorski SA, Larese-Casanova P, Scherer MM. Connecting observations of hematite (α-Fe2O3) growth catalized by Fe(II). Environ Sci Technol 2010; 44: 61–67. pmid:20039734
  57. 57. Gorsky CA, Handler RM, Beard BL, Pasakarnis T, Johnson CM, Scherer MM. Fe atom exchange between aqueous Fe2+ and magnetite. Environ Sci Technol 2012; 46: 12399–12407. pmid:22577839
  58. 58. Neumann A, Olson TL, Scherer MM. Spectroscopic evidence for Fe(II)-Fe(III) electron transfer at clay mineral edge and basal sites. Environ Sci Technol 2013; 47: 6969–6777. pmid:23517074
  59. 59. Kato S, Nakamura R, Kai F, Watanabe K, Hashimoto K. Respiratory interactions of soil bacteria with (semi)conductive iron-oxide minerals. Environ Microbiol 2010; 12: 3114–3123. pmid:20561016
  60. 60. Kato S, Hashimoto K, Watanabe K. Microbial interspecies electron transfer via electric currents through conductive minerals. Proc Nat Acad Sci USA 2012; 109: 10042–10046. pmid:22665802
  61. 61. Kato S, Hashimoto K, Watanabe K. Iron-oxide minerals affect extracellular electron-transfer paths of Geobacter spp. Microbes Environ 2013; 28: 141–148. pmid:23363619
  62. 62. Jiang S, Park S, Yoon Y, Lee J-H, Wu W-M, Dan NP, et al. Methanogenesis facilitated by geobiochemical iron cycle in a nove syntrophic methanogenic microbial community. Environ Sci Technol 2013; 47: 10078–10084. pmid:23919295
  63. 63. Byrne JM, Klueglein N, Pearce C, Rosso KM, Appel E, Kappler A. Redox cycling of Fe(II) and Fe(III) in magnetite by Fe-metabolizing bacteria. Nature 2015; 347: 1473–1476.
  64. 64. Shi L, Dong H, Reguera G, Beyenal H, Lu Z, Liu J, et al. Extracellular electron transfer mechanisms between microorganisms and minerals. Nat Rev Microbiol 2016; 14: 651–662. pmid:27573579
  65. 65. Altschul SF, Madden TL, Schäffer AA, Zhang J, Zhang Z, Miller W, et al. Gapped BLAST and PSI-BLAST: a new generation of protein database search programs. Nucl Acid Res 1997; 25: 3389–3402.
  66. 66. Guo X, Yin H, Cong J, Dai Z, Liang Y, Liu X. RubisCO gene clusters found in a metagenome microarray from acid mine drainage. Appl Environ Microbiol 2013; 79: 2019–2026. pmid:23335778
  67. 67. Brito EMS, Villegas-Negrete N, Sotelo-González , Caretta CA, Goñi-Urriza M, Gassie C, et al. Microbial diversity in Los Azufres geothermal field (Michoacán, Mexico) and isolation of representative sulfate and sulfur reducers. Extremophiles 2014; 18: 385–398. pmid:24446065
  68. 68. Falteisek L, Cepicka I. Microbiology of diverse acidic and non-acidic microhabitats within a sulfidic ore mine. Extremophiles 2012; 16: 911–922. pmid:23065060
  69. 69. Santofimia E, González-Toril E, López-Pamo E, Gomariz M, Amils R, Aguilera Á. Microbial diversity and its relationship to physicochemical characteristics of the water in two extreme acidic pit lakes from the Iberian Pyrite Belt (SW Spain). PLOS ONE 2013; 8: e66746. pmid:23840525
  70. 70. Fabisch M, Freyer G, Johnson CA, Büchel G, Akob DM, Neu TR, et al. Dominance of ‘Gallionella capsiferriformans’ and heavy metal associateion with Gallionella-like stalks in metal-rich pH 6 mine water discharge. Geobiology 2016; 14: 68–90. pmid:26407813
  71. 71. Akob DM, Bohu T, Beyer A, Schäffner F, Händel M, Johnson CA, et al. Identification of Mn(II)-oxidizing bacteria from a low-pH contaminated former uranium mine. Appl Environ Microbiol 2014; 80: 5086–5097. pmid:24928873
  72. 72. García-Moyano A, González-Toril E, Aguilera Á, Amils R. Comparative microbial ecology study of the sediments and the water column of the Río Tinto, an extreme acidic environment. FEMS MIcrobiol Ecol 2012; 81: 303–314. pmid:22385317
  73. 73. Lu S, Chourey K, Reiche M, Nietzsche S, Shah MB, Neu TR, et al. Insights into the structure and metabolic function of microbes that shape pelagic iron-rich aggregates (“iron snow”). Appl Environ Microbiol 2013; 79: 4272–4281. pmid:23645202
  74. 74. Chen Q, Ni J, Ma T, Liu T, Zheng M. Bioaugmentation treatment of municipal wastewater with heterotrophic-aerobic nitrogen removal bacteria in a pilot-scale SBR. Bioresource Technol 2015; 183: 25–32.
  75. 75. Mendez MO, Neilson JW, Maier RM. Characterization of a bacterial community in an abandoned semiarid lead-zinc mine tailing site. Appl Environ Microbiol 2008; 74: 3899–3907. pmid:18424534
  76. 76. Falteisek L, Duchoslav V, Cepicka I. Substantial variability of multiple microbial communities collected at similar acidic mine water outlets. Microbial Ecol 2016; 72: 163–174.
  77. 77. Sorokin DY, Tourova TP, Lysenko AM, Muyzer G. Diversity of culturable halophilic sulfur-oxidizing bacteria in hypersaline habitats. Microbiology 2006; 152: 3013–3023. pmid:17005982
  78. 78. Sizova MV, Hohmann T., Hazen A, Paster BJ, Halem SR, Murphy SM, et al. New approaches for isolation of previously uncultivated oral bacteria. Appl Environ Microbiol 2012; 78: 194–203. pmid:22057871
  79. 79. Wu X, Fang H, Qian C, Shen X, Li O, Gao H. Paenibacillus tianmuensis sp. nov., isolated from soil. Int J Syst Evol Microbiol 2011; 61: 1133–1137. pmid:20543152
  80. 80. King CE, King GM. Description of Thermogemmatispora carbonxidivorans sp. nov., a carbon-monoxide-oxidizing member fo the class Ktedonobacteria isolated from a geothermally heated biofilm, and analysis of carbon monoxide oxidation by members of the class Ktedonobacteria. Int J Syst Evol Microbiol 2014; 64: 1244–1251. pmid:24425739
  81. 81. Mori JF, Lu S, Händel M, Totsche KU, Neu TR, Iancu VV, et al. Schwertmannite formation at cell junctions by a new filament-forming Fe(II)-oxidizing isolate affiliated with the novel genus Acidithrix. Microbiology 2016; 162: 62–71. pmid:26506965
  82. 82. Itoh T, Yamnoi K, Kudo T, Ohkuma M, Takashina T. Aciditerrimonas ferrireducens gen. nov., sp. nov., an iron-reducing thermoacidophilic actinobacterium isolated from a solfataric field. Int J Syst Evol Microbiol 201; 61: 1281–1285. pmid:20639230
  83. 83. Breuker A, Blazejak A, Bosecker K, Schippers A. Diversity of iron oxidizing bacteria from various sulfidic mine waste dumps. Adv Mat Res 2009; 71–73: 47–50.
  84. 84. Diaby N, Dold B, Pfeifer HR, Holliger C, Johnson DB, Hallberg KB. Microbial communities in a porphyry copper tailings impoundment and their impact on the geochemical dynamics of the mine waste. Environ Microbiol 2007; 9: 298–307. pmid:17222129
  85. 85. Okamura K, Kawai A, Yamada T, Hiraishi A. Acidipila resea gen. nov., sp. nov., an acidophilic chemoorganotrophic bacterium belonging to the phylum Acidobacteria. FEMS Microbiol Lett 2011; 317: 138–142. pmid:21255071
  86. 86. Sokolova TG, González JM, Kostrikina NA, Chernyh NA, Slepova TV, Bonch-Osmolovskaya EAB, et al. Thermosinus carboxydivorans gen. nov., sp. nov., a new anaerobic, thermophilic, carbon-monoxide-oxidizing, hydrogenogenic bacterium from a hot pool of Yellowstone National Park. Int J Syst Evol Microbiol 2004; 54: 2353–2359. pmid:15545483
  87. 87. Menes RJ, Viera CE, Farías ME, Seufferheld JK. Halopeptonella vilamensis gen. nov., sp. nov., a halophilic strictly aerobic bacterium of the family Ectothiorhodospiraceae. Extremophiles 2016; 20: 19–25. pmid:26475627
  88. 88. Kay CM, Haanela A, Johnson DB. Microorganisms in subterranean acidic waters within Europe’s deepest metal mine. Res Microbiol 2014; 165: 705–712. pmid:25063488
  89. 89. Bowman KS, Dupré RE, Rainey FA, Moe WM. Clostridium hydrogeniformans sp. nov. and Clostridium cavendishii sp. nov., hydrogen-producing bacteria from chlorinated solvent-contaminated groundwater. Int J Syst Evol Microbiol 2010; 60: 358–363. pmid:19651721
  90. 90. Zavarzina DG, Tourova TP, Kuznetsov BB, Bonch-Osmolovskaya EA, Slobodkin AI. Thermovenalulum ferrioganovorum gen. nov., sp. nov., a novel thermophilic, anaerobic, endospore-forming bacterium. Int J Syst Evo Microbiol 2002; 52: 1737–1743.
  91. 91. Cavaletti L, Monciardini P, Bamonte R, Schumann P, Rojde M, Sosio M, et al. New lineage of filamentous, spore-forming, gram-positive bacteria from soil. Appl Environ Microbiol 2006; 72: 4360–4369. pmid:16751552
  92. 92. Yuan X, Nogi Y, Tan X, Zhang R-G, Lv J. Arenimonas maotaiensis sp. nov., isolated from fresh water. Int J Syst Evol Microbiol 2014; 64: 3994–4000. pmid:25212225