WEKO3
アイテム
{"_buckets": {"deposit": "d946b9bd-48bb-4a4b-bcfd-27d311d32c52"}, "_deposit": {"created_by": 18, "id": "4245", "owners": [18], "pid": {"revision_id": 0, "type": "depid", "value": "4245"}, "status": "published"}, "_oai": {"id": "oai:kyutech.repo.nii.ac.jp:00004245", "sets": ["7"]}, "author_link": [], "item_20_date_granted_61": {"attribute_name": "学位授与年月日", "attribute_value_mlt": [{"subitem_dategranted": "2015-03-25"}]}, "item_20_degree_grantor_59": {"attribute_name": "学位授与機関", "attribute_value_mlt": [{"subitem_degreegrantor": [{"subitem_degreegrantor_name": "九州工業大学"}], "subitem_degreegrantor_identifier": [{"subitem_degreegrantor_identifier_name": "17104", "subitem_degreegrantor_identifier_scheme": "kakenhi"}]}]}, "item_20_degree_name_58": {"attribute_name": "学位名", "attribute_value_mlt": [{"subitem_degreename": "博士(情報工学)"}]}, "item_20_description_30": {"attribute_name": "目次", "attribute_value_mlt": [{"subitem_description": "CHAPTER 1 Introduction||CHAPTER 2 The Chemical Mechanical Polishing Technology||CHAPTER 3 The Variable Rotation Polishing Method in theCMP Process||CHAPTER 4 The Polishing Performance of Variable Rotation Polishing Method||CHAPTER 5 Mechanisms Analysis of the Variable Rotation Polishing Method||CHAPTER 6 Polishing Pad Analysis by 3D Topography Observation||CHAPTER 7 Conclusions", "subitem_description_type": "TableOfContents"}]}, "item_20_description_4": {"attribute_name": "抄録", "attribute_value_mlt": [{"subitem_description": "Variable rotation polishing (VRP) method is proposed in order to improve polishing performance such as material removal rate (MRR). The VRP method is characterized as a combination of the additional backward rotation with the forward rotation only (i.e. the conventional polishing). The MRR increases as the angle of additional backward rotation becomes higher until 360 degrees. In that case, the MRR of the VRP method was 38 percent higher than that of the conventional polishing. Asperity of polishing pad surface is one of the dominant parameters affecting the MRRs and stabilities of the Chemical Mechanical Polishing (CMP) process. According to the investigation of a polishing pad surface topography suggests that the asperity of the polishing pad surface was kept standing upright by backward rotation of the polishing pad. Particularly, the peak area of the asperities on polishing pad surface, the roughness became higher in the VRP method than in the conventional method. This result predicts that there are more the number and the area of the polishing pad asperities, which would approach near to the wafer surface being polished, are kept standing upright in the VRP method. Therefore, these asperities was able to consequently sustain the MRRs. In other words, this behavior suggests that in the VRP method, the preservation of the asperity on polishing pad surface would sustain the MRR because of the backward rotation, which may contribute to the realization of a polishing pad conditioning treatment-free CMP process. This feature also indicates that this method could result in the longer polishing pad life, namely the cost reduction of polishing pad. Slurry flow distribution and slurry film thickness were also evaluated in the VRP method comparing to the conventional polishing method. The slurry flow distribution was analyzed through a transparent quartz substrate by a high-speed camera. The slurry flow distribution of the VRP method was not uniform as compared with the conventional method, although the MRR of the VRP method was higher than that of the conventional method. The slurry film thickness variation was measured using a surface scanning laser confocal displacement meter on the upper surface position of a quartz substrate with and without slurry. The position of a quartz substrate varied from 9 μm to 8 μm during the CMP process. This implies that the slurry film thickness in the VRP method was 1 μm thinner than that of the conventional polishing. These results suggest that these 2 parameters are not dominantly effective against the MRR of the CMP process. As above mentioned, the preservation of the asperity on polishing pad surface is one of the dominant parameters to sustain the MRR.", "subitem_description_type": "Abstract"}]}, "item_20_description_5": {"attribute_name": "備考", "attribute_value_mlt": [{"subitem_description": "九州工業大学博士学位論文 学位記番号:情工博甲第301号 学位授与年月日:平成27年3月25日", "subitem_description_type": "Other"}]}, "item_20_description_60": {"attribute_name": "学位授与年度", "attribute_value_mlt": [{"subitem_description": "平成26年度", "subitem_description_type": "Other"}]}, "item_20_dissertation_number_62": {"attribute_name": "学位授与番号", "attribute_value_mlt": [{"subitem_dissertationnumber": "甲第301号"}]}, "item_20_identifier_registration": {"attribute_name": "ID登録", "attribute_value_mlt": [{"subitem_identifier_reg_text": "10.18997/00004239", "subitem_identifier_reg_type": "JaLC"}]}, "item_20_text_34": {"attribute_name": "アドバイザー", "attribute_value_mlt": [{"subitem_text_value": "鈴木, 恵友"}]}, "item_20_version_type_63": {"attribute_name": "出版タイプ", "attribute_value_mlt": [{"subitem_version_resource": "http://purl.org/coar/version/c_970fb48d4fbd8a85", "subitem_version_type": "VoR"}]}, "item_access_right": {"attribute_name": "アクセス権", "attribute_value_mlt": [{"subitem_access_right": "open access", "subitem_access_right_uri": "http://purl.org/coar/access_right/c_abf2"}]}, "item_creator": {"attribute_name": "著者", "attribute_type": "creator", "attribute_value_mlt": [{"creatorNames": [{"creatorName": "Pipat, Phaisalpanumas", "creatorNameLang": "en"}]}]}, "item_files": {"attribute_name": "ファイル情報", "attribute_type": "file", "attribute_value_mlt": [{"accessrole": "open_date", "date": [{"dateType": "Available", "dateValue": "2015-08-05"}], "displaytype": "detail", "download_preview_message": "", "file_order": 0, "filename": "jou_k_301.pdf", "filesize": [{"value": "8.6 MB"}], "format": "application/pdf", "future_date_message": "", "is_thumbnail": false, "licensetype": "license_note", "mimetype": "application/pdf", "size": 8600000.0, "url": {"label": "jou_k_301.pdf", "objectType": "fulltext", "url": "https://kyutech.repo.nii.ac.jp/record/4245/files/jou_k_301.pdf"}, "version_id": "b82260af-bcc9-4e79-819e-ca3cab3a9ca7"}]}, "item_keyword": {"attribute_name": "キーワード", "attribute_value_mlt": [{"subitem_subject": "Variable Rotation Polishing", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Chemical Mechanical Polishing", "subitem_subject_scheme": "Other"}, {"subitem_subject": "CMP process", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Slurry", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Polishing pad", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Material removal rate", "subitem_subject_scheme": "Other"}, {"subitem_subject": "Asperity", "subitem_subject_scheme": "Other"}]}, "item_language": {"attribute_name": "言語", "attribute_value_mlt": [{"subitem_language": "eng"}]}, "item_resource_type": {"attribute_name": "資源タイプ", "attribute_value_mlt": [{"resourcetype": "doctoral thesis", "resourceuri": "http://purl.org/coar/resource_type/c_db06"}]}, "item_title": "Study on Variable Rotation Polishing Method in Chemical Mechanical Polishing", "item_titles": {"attribute_name": "タイトル", "attribute_value_mlt": [{"subitem_title": "Study on Variable Rotation Polishing Method in Chemical Mechanical Polishing", "subitem_title_language": "en"}, {"subitem_title": "CMPにおける可変回転ポリシング法に関する研究", "subitem_title_language": "ja"}]}, "item_type_id": "20", "owner": "18", "path": ["7"], "permalink_uri": "https://doi.org/10.18997/00004239", "pubdate": {"attribute_name": "PubDate", "attribute_value": "2015-08-05"}, "publish_date": "2015-08-05", "publish_status": "0", "recid": "4245", "relation": {}, "relation_version_is_last": true, "title": ["Study on Variable Rotation Polishing Method in Chemical Mechanical Polishing"], "weko_shared_id": -1}
CMPにおける可変回転ポリシング法に関する研究
https://doi.org/10.18997/00004239
https://doi.org/10.18997/000042390893eb0c-e9ff-4432-883f-7b87db7f288a
名前 / ファイル | ライセンス | アクション |
---|---|---|
jou_k_301.pdf (8.6 MB)
|
|
Item type | 学位論文 = Thesis or Dissertation(1) | |||||||
---|---|---|---|---|---|---|---|---|
公開日 | 2015-08-05 | |||||||
資源タイプ | ||||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_db06 | |||||||
資源タイプ | doctoral thesis | |||||||
タイトル | ||||||||
言語 | en | |||||||
タイトル | Study on Variable Rotation Polishing Method in Chemical Mechanical Polishing | |||||||
タイトル | ||||||||
言語 | ja | |||||||
タイトル | CMPにおける可変回転ポリシング法に関する研究 | |||||||
言語 | ||||||||
言語 | eng | |||||||
著者 |
Pipat, Phaisalpanumas
× Pipat, Phaisalpanumas
|
|||||||
抄録 | ||||||||
内容記述タイプ | Abstract | |||||||
内容記述 | Variable rotation polishing (VRP) method is proposed in order to improve polishing performance such as material removal rate (MRR). The VRP method is characterized as a combination of the additional backward rotation with the forward rotation only (i.e. the conventional polishing). The MRR increases as the angle of additional backward rotation becomes higher until 360 degrees. In that case, the MRR of the VRP method was 38 percent higher than that of the conventional polishing. Asperity of polishing pad surface is one of the dominant parameters affecting the MRRs and stabilities of the Chemical Mechanical Polishing (CMP) process. According to the investigation of a polishing pad surface topography suggests that the asperity of the polishing pad surface was kept standing upright by backward rotation of the polishing pad. Particularly, the peak area of the asperities on polishing pad surface, the roughness became higher in the VRP method than in the conventional method. This result predicts that there are more the number and the area of the polishing pad asperities, which would approach near to the wafer surface being polished, are kept standing upright in the VRP method. Therefore, these asperities was able to consequently sustain the MRRs. In other words, this behavior suggests that in the VRP method, the preservation of the asperity on polishing pad surface would sustain the MRR because of the backward rotation, which may contribute to the realization of a polishing pad conditioning treatment-free CMP process. This feature also indicates that this method could result in the longer polishing pad life, namely the cost reduction of polishing pad. Slurry flow distribution and slurry film thickness were also evaluated in the VRP method comparing to the conventional polishing method. The slurry flow distribution was analyzed through a transparent quartz substrate by a high-speed camera. The slurry flow distribution of the VRP method was not uniform as compared with the conventional method, although the MRR of the VRP method was higher than that of the conventional method. The slurry film thickness variation was measured using a surface scanning laser confocal displacement meter on the upper surface position of a quartz substrate with and without slurry. The position of a quartz substrate varied from 9 μm to 8 μm during the CMP process. This implies that the slurry film thickness in the VRP method was 1 μm thinner than that of the conventional polishing. These results suggest that these 2 parameters are not dominantly effective against the MRR of the CMP process. As above mentioned, the preservation of the asperity on polishing pad surface is one of the dominant parameters to sustain the MRR. | |||||||
目次 | ||||||||
内容記述タイプ | TableOfContents | |||||||
内容記述 | CHAPTER 1 Introduction||CHAPTER 2 The Chemical Mechanical Polishing Technology||CHAPTER 3 The Variable Rotation Polishing Method in theCMP Process||CHAPTER 4 The Polishing Performance of Variable Rotation Polishing Method||CHAPTER 5 Mechanisms Analysis of the Variable Rotation Polishing Method||CHAPTER 6 Polishing Pad Analysis by 3D Topography Observation||CHAPTER 7 Conclusions | |||||||
備考 | ||||||||
内容記述タイプ | Other | |||||||
内容記述 | 九州工業大学博士学位論文 学位記番号:情工博甲第301号 学位授与年月日:平成27年3月25日 | |||||||
キーワード | ||||||||
主題Scheme | Other | |||||||
主題 | Variable Rotation Polishing | |||||||
キーワード | ||||||||
主題Scheme | Other | |||||||
主題 | Chemical Mechanical Polishing | |||||||
キーワード | ||||||||
主題Scheme | Other | |||||||
主題 | CMP process | |||||||
キーワード | ||||||||
主題Scheme | Other | |||||||
主題 | Slurry | |||||||
キーワード | ||||||||
主題Scheme | Other | |||||||
主題 | Polishing pad | |||||||
キーワード | ||||||||
主題Scheme | Other | |||||||
主題 | Material removal rate | |||||||
キーワード | ||||||||
主題Scheme | Other | |||||||
主題 | Asperity | |||||||
アドバイザー | ||||||||
鈴木, 恵友 | ||||||||
学位授与番号 | ||||||||
学位授与番号 | 甲第301号 | |||||||
学位名 | ||||||||
学位名 | 博士(情報工学) | |||||||
学位授与年月日 | ||||||||
学位授与年月日 | 2015-03-25 | |||||||
学位授与機関 | ||||||||
学位授与機関識別子Scheme | kakenhi | |||||||
学位授与機関識別子 | 17104 | |||||||
学位授与機関名 | 九州工業大学 | |||||||
学位授与年度 | ||||||||
内容記述タイプ | Other | |||||||
内容記述 | 平成26年度 | |||||||
出版タイプ | ||||||||
出版タイプ | VoR | |||||||
出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||||
アクセス権 | ||||||||
アクセス権 | open access | |||||||
アクセス権URI | http://purl.org/coar/access_right/c_abf2 | |||||||
ID登録 | ||||||||
ID登録 | 10.18997/00004239 | |||||||
ID登録タイプ | JaLC |