The impressive kinematic capabilities and structural adaptations presented by bio-locomotion continue to inspire some of the advancements in today's small-scaled flying and swimming vehicles. These vehicles operate in a low Reynolds number flow regime where viscous effects dominate flow interactions, which makes it challenging to generate lift and thrust. Overcoming these challenges means utilizing non-conventional lifting and flow control mechanisms generated by unsteady flapping body motion. Understanding and characterizing the aerodynamic phenomena associated with the unsteady motion is vital to predict the unsteady fluid loads generated, to implement control methodologies, and to assess the dynamic stability and control authority of airborne and underwater vehicles. This dissertation presents experimental results for forced oscillations on multi-element airfoils and hydrofoils for Reynolds numbers between Re=104 and Re=106. The document divides the work into four main sections: The first topic presents wind tunnel measurements of lift forces generated by an oscillating trailing edge flap on a NACA-0012 airfoil to illustrate the effects that frequency and pitching amplitude have on lift enhancement. The results suggest that this dynamic trailing edge flap enhances the mean lift by up to 20% in the stalled flow regime. Using frequency response approach, it is determined that the maximum enhancement in circulatory lift amplitude occurs at stalled angles of attack for lower pitching amplitudes. The second topic presents wind tunnel measurements for lift and drag generated by a sinusoidal and non-sinusoidal oscillations of a NACA-0012 airfoil. The results show that 'trapezoidal' pitching enhances the mean lift and the RMS lift by up to 50% and 35% in the pre-stall flow regime, respectively, whereas the 'reverse sawtooth' and sinusoidal pitching generate the most substantial increase of the lift-to-drag ratio in stall and post-stall flow regimes, respectively. The third topic involves a study on the role of fish-tail flexibility on thrust and propulsive efficiency. Flexible tails enhance thrust production in comparison to a rigid ones of the same size and under the same operating conditions. Further analysis indicates that varying the tail's aspect ratio has a more significant effect on propulsive efficiency and the thrust-to-power ratio at zero freestream flow. On the other hand, changing the material's property has the strongest impact on propulsive efficiency at non-zero freestream flow. The results also show that the maximum thrust peaks correspond to the maximum passive tail amplitudes only for the most flexible case. The final topic aims to assess the unsteady hydrodynamic forces and moments generated by a three-link swimming prototype performing different swimming gaits, swimming speeds, and oscillatory frequencies. We conclude that the active actuation of the tail's first mode bending produces the most significant thrust force in the presence of freestream flow. In contrast, the second mode bending kinematics provides the most significant thrust force in a zero-freestream flow.