Počet záznamů: 1  

Fabrication of Al-Based Composite Extruded Plates Containing Cellulose Nanofibers and Their Microstructure and Mechanical Properties

  1. 1.
    0564387 - ÚPT 2023 RIV JP eng J - Článek v odborném periodiku
    Lee, S. - Watanabe, S. - Tsuchiya, T. - Mikmeková, Šárka - Müllerová, Ilona - Ono, Y. - Takaguchi, Y. - Ikeno, S. - Matsuda, K.
    Fabrication of Al-Based Composite Extruded Plates Containing Cellulose Nanofibers and Their Microstructure and Mechanical Properties.
    Materials Transactions. Roč. 63, č. 11 (2022), s. 1590-1596. ISSN 1345-9678. E-ISSN 1347-5320
    Institucionální podpora: RVO:68081731
    Klíčová slova: aluminum * cellulose nanofiber * composite materials * extrusion * microstructure
    Obor OECD: Materials engineering
    Impakt faktor: 1.2, rok: 2022
    Způsob publikování: Open access
    https://www.jstage.jst.go.jp/article/matertrans/63/11/63_MT-M2022107/_article

    CeNF/Al-based composites were prepared using CeNFs collected by a non-woven aluminum filter, followed by hot extrusion to obtain plates. Gel-like CeNFs were collected by an aluminum non-woven filter and compacted by a warm press to obtain a compressed form with a lighter specific density than pure aluminum. The compressed forms were hot extruded to fabricate bars and plates. Both bars and plates were observed in the macro-and microstructural morphology and XRD measurements. They were not significantly carbonized to graphite only, which was inferred to be present as CeNF under the present experimental conditions. Microstructural observations show that CeNFs are aggregated and present in the pores/cracks between the Al filters in the compressed forms. Al filters and CeNF aggregates were more finely mixed when the material was fabricated into hot extruded plates with a higher extrusion ratio. The maximum tensile strength of the CeNF/Al composite extruded plate was about 1.5 times higher than pure aluminum. In addition, the extruded plates could be cold-rolled by about 30%, and the maximum tensile strength of the extruded sheets was found to be about twice that of pure aluminum.
    Trvalý link: https://hdl.handle.net/11104/0336063

     
     
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.