Počet záznamů: 1  

TENSILE PROPERTIES OF POLYPROPYLENE ADDITIVELY MANUFACTURED BY FDM

  1. 1.
    0571436 - ÚFM 2024 RIV RS eng J - Článek v odborném periodiku
    Milovanović, A. - Golubovic, Z. - Babinský, Tomáš - Šulák, Ivo - Mitrović, A.
    TENSILE PROPERTIES OF POLYPROPYLENE ADDITIVELY MANUFACTURED BY FDM.
    Structural Integrity and Life. Roč. 22, č. 3 (2022), s. 305-308. ISSN 1451-3749
    GRANT EU: European Commission(XE) 857124 - Horizont 2020
    Institucionální podpora: RVO:68081723
    Klíčová slova: Fused Deposition Modeling (FDM) * polypropylene * additive manufacturing parameters * tensile properties
    Obor OECD: Mechanical engineering
    Impakt faktor: 0.4, rok: 2022
    Způsob publikování: Open access
    https://www.researchgate.net/publication/366696773_Tensile_properties_of_polypropylene_additively_manufactured_by_FDM#full-text

    Polypropylene (PP) is an extensively studied and tested environment-friendly polymer, whose applications range from product packaging in the food industry to biomedical applications. It is a non-toxic, lightweight material, relatively simple for processing. Research findings show that PP material has higher elongation than any other thermoplastic material used in Fused Deposition Modeling (FDM) technology, which is the most developed and used extrusion-based additive technology. In FDM, many printing parameters must be set before the actual additive manufacturing process, and they have a decisive influence on the mechanical properties of fabricated parts. In this research, layer height, infill density, and raster orientation are the parame-ters considered in the analysis, resulting in four specimen batches being prepared for tensile testing.
    Trvalý link: https://hdl.handle.net/11104/0342660

     
     
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.