Commissioning of the inductive heater for hypervapotron testing

0579095 - ÚFP 2024 RIV NL eng J - Článek v odborném periodiku
Smolík, V. - Gleitz, M. - Zácha, P. - Entler, Slavomír
Commissioning of the inductive heater for hypervapotron testing.
Fusion Engineering and Design. Roč. 194, September (2023), č. článku 113928. ISSN 0920-3796. E-ISSN 1873-7196
Grant CEP: GA MŠMT EF16_019/0000778
Grant ostatní: AV ČR(CZ) StrategieAV21/27
Program: StrategieAV
Institucionální podpora: RVO:61389021
Klíčová slova: ANSYS fluent * ANSYS maxwell * High heat flux cooling * Hypervapotron
Obor OECD: Nuclear related engineering
Impakt faktor: 1.7, rok: 2022
Způsob publikování: Omezený přístup
https://www.sciencedirect.com/science/article/pii/S0920379623005100?via%3Dihub

The paper describes commissioning of the inductive heater based on numerical simulation of inductive heating in the hypervapotron sample and test channel. The HEFEL loop is being developed to research a high heat flux cooling channels applicable in fusion devices. The Box Scraper hypervapotron channel geometry represents a primary focus of research. Conditions in the first wall of tokamak are simulated by induction heating of the tested hypervapotron channel. The exact heat flux of tested sample is difficult to measure, thus the numerical simulation of induction heating and thermohydraulic model of the cooling channel are an important part of HEFEL loop commissioning. ANSYS Maxwell 3D and ANSYS Fluent coupling is used for optimalization of the induction heating to achieve the highest heat fluxes using selected induction heating source.
Trvalý link: https://hdl.handle.net/11104/0347960