Digital pixel test structures implemented in a 65 nm CMOS process

0582691 - ÚJF 2024 RIV NL eng J - Článek v odborném periodiku
Aglieri Rinella, G. - Andronic, A. - Antonelli, M. - Aresti, M. - Isakov, Artem - Kotliarov, Artem - Křížek, Filip … celkem 52 autorů
Digital pixel test structures implemented in a 65 nm CMOS process.
Nuclear Instruments & Methods in Physics Research Section A. Roč. 1056, NOV (2023), č. článku 168589. ISSN 0168-9002. E-ISSN 1872-9576
Grant CEP: GA MŠMT LM2023040
Institucionální podpora: RVO:61389005
Klíčová slova: ALICE detector * Monolithic active pixel sensors * Solid state detectors
Obor OECD: Nuclear physics
Impakt faktor: 1.4, rok: 2022
Způsob publikování: Open access
https://doi.org/10.1016/j.nima.2023.168589

The ALICE ITS3 (Inner Tracking System 3) upgrade project and the CERN EP R&D on monolithic pixel sensors are investigating the feasibility of the Tower Partners Semiconductor Co. 65 nm process for use in the next generation of vertex detectors. The ITS3 aims to employ wafer-scale Monolithic Active Pixel Sensors thinned down to 20–40 µm and bent to form truly cylindrical half barrels. Among the first critical steps towards the realisation of this detector is to validate the sensor technology through extensive characterisation both in the laboratory and with in-beam measurements. The Digital Pixel Test Structure (DPTS) is one of the prototypes produced in the first sensor submission in this technology and has undergone a systematic measurement campaign whose details are presented in this article. The results confirm the goals of detection efficiency and non-ionising and ionising radiation hardness up to the expected levels for ALICE ITS3 and also demonstrate operation at ＋20 °C and a detection efficiency of 99% for a DPTS irradiated with a dose of 1015 1 MeV neq cm-2. Furthermore, spatial, timing and energy resolutions were measured at various settings and irradiation levels.
Trvalý link: https://hdl.handle.net/11104/0350772