Block size determination in marble quarrying

Download
084672.pdf
1997
Yalçın, R Ebru
Show full item record
59
views
0
downloads
https://hdl.handle.net/11511/10630
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Matrix Fracture Interaction in Sandstone Rocks During Carbon Dioxide Injection
Bülbül, Sevtaç; Parlaktuna, Mahmut (2011-05-11)
Clay concentration and heating rate effect on crude oil combustion by thermogravimetry
Kök, Mustafa Verşan (2012-04-01)
In this research, the effect of heating rate and different clay concentrations on heavy oil combustion was investigated by thermogravimetry (TG-DTG). In TG-DTG experiments, two main distinct reaction regions were identified in all of the crude oil + limestone mixtures; known as low temperature oxidation (LTO) and high temperature oxidation (HTO) respectively. It was observed that addition of clay to porous matrix (limestone + heavy oil) significantly affected the thermal characteristics and kinetics of crud...
Floor heave in the gate roadways of ADL collieries.
Yücekent, Uğur; Department of Mining Engineering (1979)
Foam characterization using image processing techniques
Ozbayoglu, E.m.; Akın, Serhat; Eren, T. (null; 2005-07-28)
Foam has been used in petroleum industry as a fracturing fluid and a drilling circulation fluid for many years. Proper determination of volumetric requirements for gas and liquid phase of foam during drilling and fracturing applications is directly related with an accurate foam characterization. It has been observed that, bubble size and texture of foam has an influence on foam rheology, however, no mathematical description has been introduced for their effect. The idea behind conducting this study is to ge...
Floor response spectrum development for structural systems
Yaman, İsmail Özgür; Gülkan, Polat; Department of Civil Engineering (1995)
Citation Formats
R. E. Yalçın, “Block size determination in marble quarrying,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr