Effect of processing variables on texture and formability of low-C rimming steels.

Date

1986

Author

Vural, Hasan

Metadata

Show full item record

Item Usage Stats

79
views

0
downloads

URI

https://hdl.handle.net/11511/11092

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Effect of processing variables on texture and formability of al-killed low-C steel sheets. Günel, Nüvit; Department of Metallurgical Engineering (1986)
Effect of operational parameters and formation properties on drillability in surface set diamond core drilling Akün, M. Ertan; Karpuz, Celal; Department of Mining Engineering (1997)
Effect of shape and size on solidification times of sand castings. Özşen, Şefik; Department of Metallurgical Engineering (1972)
Effect of cutting speed on tool performance in milling of B4Cp reinforced aluminum metal matrix composites Karakas, M. Serdar; Acir, Adem; Ubeyli, Mustafa; Ögel, Bilgehan (Elsevier BV, 2006-09-14) In this study, wear behavior of various tools in milling process of Al-4Cu/B4Cp composites was investigated. For this purpose, composite samples were produced by liquid phase sintering to be used in milling operation. Five different cutting speeds at a constant feed rate of 0.20 mm/z were used in order to determine the effect of cutting speed on tool wear and tool wear mechanism in milling of these composites. Milling operations were continued until flank wear limit (V-B)=0.3 mm was attained for each tool. ...
Effect of operating parameters on performance of additive/ zeolite/ polymer mixed matrix membranes Oral, Edibe Eda; Yılmaz, Levent; Kalıpçılar, Halil; Department of Chemical Engineering (2011) Membrane based separation techniques have been widely used and developed over decades. Generally polymeric membranes are used in membrane based gas separation; however their gas separation performances are not sufficient enough for industrial feasibility. On the other hand inorganic membranes have good separation performance but they have processing difficulties. As a consequence mixed matrix membranes (MMMs) which comprise of inorganic particles dispersed in organic matrices are developed. Moreover, to enh...

Citation Formats

H. Vural, “Effect of processing variables on texture and formability of low-C rimming steels.,” Middle East Technical University, 1986.