Synthesis and characterization of non-ferrous based bulk amorphous alloys

2001
Türkeş, Halil Melih
Show full item record
55
views
0
downloads
https://hdl.handle.net/11511/11521
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Synthesis and characterization of copper based bulk amorphous alloys
Erdem, Mermer; Akdeniz, Mahmut Vedat; Mekhrabov, Amdulla O.; Department of Metallurgical and Materials Engineering (2013)
Copper based bulk metallic glasses (BMG’s) are one of the promising advanced materials due to their unique mechanical properties, high glass forming ability (GFA) and low cost. In this thesis, the aim is to synthesize Cu-Hf based BMG’s and to investigate the crystallization behavior. Moreover, the crystallization kinetics by means of activation energies, critical cooling rate, nanocrystallization and Avrami exponents have been studied. Cu70Hf30 and Cu50Hf50 binary alloys were produced via arc melting with s...
Synthesis and Characterization of Zirconium based Bulk Amorphous Alloys
Saltoğlu, İlkay; Akdeniz, Mahmut Vedat; Mehrabov, Amdulla (2005-09-28)
In recent years, bulk amorphous alloys and nanocrystalline materials have been synthesized in a number of ferrous and non-ferrous based alloys systems, which have gained some applications due to their unique physico-chemical and mechanical properties. In the last decade, Zr-based alloys with a wide supercooled liquid region and excellent glass forming ability have been discovered. These systems have promising application fields due to their mechanical properties; high tensile strength, high fracture toughne...
Synthesis and characterization of zirconium based bulk amorphous alloys
Saltoğlu, İlkay; Akdeniz, Mahmut Vedat; Department of Metallurgical and Materials Engineering (2004)
In recent years, bulk amorphous alloys and nanocrystalline materials have been synthesized in a number of ferrous and non-ferrous based alloys systems, which have gained some applications due to their unique physico-chemical and mechanical properties. In the last decade, Zr-based alloys with a wide supercooled liquid region and excellent glass forming ability have been discovered. These systems have promising application fields due to their mechanical properties; high tensile strength, high fracture toughne...
Synthesis and characterization of conducting polypyrrole-cis-1,4-polybutadiene composites
Yildirim, P; Kucukyavuz, Z (1998-05-30)
Conducting composite films of cis-1,4-polybutadiene with polypyrrole were prepared electrochemically. Polymerization of pyrrole was carried on cis-1,4-polybutadiene-coated platinum electrodes. The composites having different polypyrrole percentages showed conductivity in the range 10(-1)-10(-6) S/cm. Conductivity measurements were done by using the standard four-probe technique. Characterization of the samples was carried out by FT-IR, scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) tec...
Synthesis and characterization of polystyrene clay nanocomposites
Özden, Gülsüm; Yılmazer, Ülkü; Department of Chemical Engineering (2004)
This study was undertaken to prepare polystyrene (PS)/montmorillonite (MMT) nanocomposites by different methods, including melt intercalation, in-situ polymerization and masterbatch methods. The in-situ polymerization method consisted of dispersing the styrene monomer into the galleries of MMT followed by subsequent polymerization. The PS/MMT nanocomposites formed by melt intercalation method were prepared on a twin-screw extruder. The masterbatch method was in fact a two-step process. As the first step, a ...
Citation Formats
H. M. Türkeş, “Synthesis and characterization of non-ferrous based bulk amorphous alloys,” Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr