Mechanical properties of perlite filled SBR vulcanizates: effects of mixing time and silane treatment on properties

Download
014617.pdf
1991
Ülkem, Nilgün
Show full item record
72
views
0
downloads
Polymers and polymerization, Perlite, Vulcanization
https://hdl.handle.net/11511/11648
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Electroinitiated polymerization of acrylamide, acrolein and copolymerization.
Hacıoğlu, Bilge; Toppare, Levent Kamil; Department of Chemistry (1988)
Mechanical properties of plasma surface-modified calcium carbonate-polypropylene composites
Akovali, G; Akman, MA (Wiley, 1997-02-01)
Calcium carbonate was surface-modified by plasma-polymerized acetylene and the effect of surface modification on the mechanical properties of calcium carbonate-polypropylene composites was investigated. Two different plasma polymerization conditions were selected and applied. Chemical structures of plasma-polymerized acetylene products were identified. Mechanical and thermal properties of the composites prepared were evaluated and the effects of surface modification on the extent of adhesion of filler to th...
Electrical and mechanical properties of carbon black reinforced high density polyethylene/low density polyethylene composites
Altıntaş, Bekir; Küçükyavuz, Zuhal; Department of Polymer Science and Technology (2004)
In this study, the High Density Polyethylene (HDPE) and Low Density Polyethylene (LDPE) blends prepared by Plasticorder Brabender were strengthened by adding Carbon Black (CB). Blends were prepared at 190 °C. Amounts of LDPE were changed to 30, 40, 50 and 60 percent by the volume and the percent amounts of CB were changed to 5, 10,15, 20 and 30 according to the total volume. Thermal and morphological properties were investigated by using Differential Scanning Calorimeter (DSC), Scanning Electron Microscope ...
Thermal characterization of phenol and bisphenol-A based polybenzoxazines
Bagherifam, Shahla; Hacaloğlu, Jale; Department of Polymer Science and Technology (2009)
Although, several researches on synthesis and characterization of benzoxazines and polybenzoxazines have appeared in the literature, detailed studies on thermal characterization are still limited. In this study, polymerization and thermal degradation mechanisms of benzoxazines were investigated via direct pyrolysis mass spectrometry. Benzoxazine monomers prepared by reactions of phenol or bisphenol- A with aniline or methyl amine were analyzed to investigate the effects of the structures of phenyl and amine...
Polymerization and characterization of 2-Hydroxyethyl acrylate
Vargün, Elif; Usanmaz, Ali; Department of Polymer Science and Technology (2003)
Poly(2-Hydroxyethyl acrylate), PHEA, is used as hydrophilic polymeric gels which have been studied because of its great importance for agricultural or biomedical applications. Biomedical applications of hydrogels include soft contact lenses, artificial corneas, soft tissue substitutes and burn dressings. In this study, it was aimed to synthesis the polymers with well-defined molecular weights, polydispersities and cahin topologies. Bulk, solution and atom transfer radical polymerization (ATRP) techniques at...
Citation Formats
N. Ülkem, “ Mechanical properties of perlite filled SBR vulcanizates: effects of mixing time and silane treatment on properties,” Ph.D. - Doctoral Program, Middle East Technical University, 1991.
METU IIS - Integrated Information Service open@metu.edu.tr