Show/Hide Menu
Hide/Show Apps
Logout
Türkçe
Türkçe
Search
Search
Login
Login
OpenMETU
OpenMETU
About
About
Open Science Policy
Open Science Policy
Communities & Collections
Communities & Collections
Help
Help
Frequently Asked Questions
Frequently Asked Questions
Guides
Guides
Thesis submission
Thesis submission
MS without thesis term project submission
MS without thesis term project submission
Publication submission with DOI
Publication submission with DOI
Publication submission
Publication submission
Supporting Information
Supporting Information
General Information
General Information
Copyright, Embargo and License
Copyright, Embargo and License
Contact us
Contact us
Wear behavior of H10A AISI/SAE steel nitrided by various methods
Download
119410.pdf
Date
2002
Author
Yurtışık, Koray
Metadata
Show full item record
Item Usage Stats
170
views
0
downloads
Cite This
Wear performance of salt-bath, vacuum, ion nitrided and duplex treated (nitrided and ceramic coated by physical vapor deposition technique) steel dies (H10A AISI/SAE) were studied. The dies were used for forging of steel pastes (52100 AISI/SAE) at 1050°C under 700 MPa for 0.3 - 0.4 seconds during production of bearing rings. The nitrided and un-nitrided dies were investigated via optical and scanning electron microscopy, x-ray diffraction and micro-hardness determination procedures. The service lives of dies were determined under real plant operation conditions. The nitriding and duplex treatment technologies improved the service life by 1.3 to 1.6-fold. The characteristics of layered microstructure on surface of the nitrided steel dies and effects of such layers on the wear phenomenon in hot forging operation and the tribological behavior of compound (white) layer and plasma vapor deposited ceramic coating were discussed.
Subject Keywords
Nitriding
,
Compound layer
,
Case depth
,
Hot forging
,
PVD
URI
https://hdl.handle.net/11511/12236
Collections
Graduate School of Natural and Applied Sciences, Thesis
Suggestions
OpenMETU
Core
Corrosion Resistance Studies of Austenitic Stainless Steel Grades in Molten Zinc-Aluminum Alloy Galvanizing Bath
Loto, Roland Tolulope; Ozcan, Emre (Springer Science and Business Media LLC, 2016-06-01)
The corrosion inhibition performance and mechanical behavior of galvanized and heat-treated four newly developed austenitic stainless steel grades and type 316L austenitic stainless steel for application as sink rolls in galvanizing baths of 0.14-0.21 wt.% aluminum was investigated and compared through immersion corrosion test to determine the weight loss between 168 and 504 h, tensile test, and Charpy impact test. The delta ferrite content of the test samples was observed and estimated through optical micr...
Experimental investigation and 3D finite element prediction of the white layer thickness, heat affected zone, and surface roughness in EDM process
Shabgard, Mohammadreza; Oliaei, Samad Nadimi Bavil; Seyedzavvar, Mirsadegh; Najadebrahimi, Ahmad (2011-12-01)
An axisymmetric three-dimensional model or temperature distribution in the electrical discharge machining process has been developed using the finite element method to estimate the surface integrity characteristics of AISI H13 tool steel as workpiece. White layer thickness, depth of heat affected zone, and arithmetical mean roughness consisting of the studied surface integrity features on which the effect of process parameters, including pulse on-time and pulse current were investigated. Additionally, the e...
Indium tin oxide nanoparticles as anode for light-emitting diodes
Çırpan, Ali (Wiley, 2006-02-15)
Thin films of indium tin oxide (ITO) nanoparticles have been investigated as anode materials for polymer light-emitting diodes. A luminance efficiency (0.13 cd/ A), higher than that (0.09 cd/A) obtained in a control devices fabricated on conventional commercial ITO anodes were found. The thin films were made by spin coating of a suspension followed by annealing. The ITO nartoparticle films have a stable sheet resistance of 200 ohm/sq, and an optical transmittance greater than 86% over the range of 400-1000 ...
Electrical transport, optical and thermal properties of polyaniline-pumice composites
YILMAZ, KORAY; Akgoz, A.; Cabuk, M.; Karaagac, H.; KARABULUT, ORHAN; YAVUZ, Mustafa (2011-11-01)
In this study, electrical conductivity, photoconductivity, absorbance and thermal properties of polyaniline (PANI) and polyaniline-pumice composites were investigated. Temperature dependent conductivity and photoconductivity measurements were carried out in the temperature range of 80-400K. The measurements revealed that the dominant conduction mechanisms in polyaniline and 15% pumice doped composite were hopping conduction. The low activation energies calculated for 36% pumice doped composite indicated tha...
Sensitivity Analysis of Distortion of Carburized Steel Shafts Using Computer Simulations
Yazır, Büşra; Evcil, Elif; Yıldız, Seçil; Davut, Kemal; Şimşir, Caner (null; 2016-12-01)
Carburizing and subsequent quenching heat treatments are commonly used industrial processes to improve the properties and performance of steel shafts. Undesired dimensional and shape changes (distortion) related to these treatments are still the most frequent reason for expensive and time consuming corrective operations, low performance during service and even product rejection. The major aim of this study is to identify the suitable control parameters for subsequent optimization of the carburized quenching...
Citation Formats
IEEE
ACM
APA
CHICAGO
MLA
BibTeX
K. Yurtışık, “Wear behavior of H10A AISI/SAE steel nitrided by various methods,” Middle East Technical University, 2002.
