Electrochemically prepared conducting polymer grafts of pyrrole

Download
068316.pdf
1997
Balcı, Nurcan
Show full item record
65
views
0
downloads
Pyrrole., Polymers
https://hdl.handle.net/11511/1350
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Electrochemical synthesis of crowned conducting polymers : nature of radical cations in polymerization and mechanism of conductivity
Cihaner, Atilla; Önal, Ahmet Muhtar; Department of Chemistry (2004)
Poly(dibenzo-18-crown-6) (Poly(DB18C6)) was synthesized by electrochemical oxidation of dibenzo-18-crown-6 (DB18C6) using a mixture of acetonitrile and dichloromethane as solvent and tetrabutylammonium tetrafluoroborate (TBABF4) or tetrabutylammonium hexafluorophosphate (TBAPF6) as supporting electrolyte. The anodic polymerization of DB18C6 was investigated using in-situ ESR and in-situ UV-VIS spectroscopic techniques. Spectroelectrochemical (SPEL) properties and thermal analysis of the resulting polymers h...
Thermal characterization of phenol and bisphenol-A based polybenzoxazines
Bagherifam, Shahla; Hacaloğlu, Jale; Department of Polymer Science and Technology (2009)
Although, several researches on synthesis and characterization of benzoxazines and polybenzoxazines have appeared in the literature, detailed studies on thermal characterization are still limited. In this study, polymerization and thermal degradation mechanisms of benzoxazines were investigated via direct pyrolysis mass spectrometry. Benzoxazine monomers prepared by reactions of phenol or bisphenol- A with aniline or methyl amine were analyzed to investigate the effects of the structures of phenyl and amine...
Nanocomposites based on recycled poly(ethylene terepthalate)
Tolga, Aslı; Yılmazer, Ülkü; Department of Chemical Engineering (2005)
In this study, the effects of glycol type, organoclay type and concentration on the final properties of nanocomposites based on recycled poly(ethylene terephthalate) was investigated. For this purpose, first recycled PET was glycolysed and after that unsaturated polyester-montmorillonite nanocomposites were synthesized by using three different types of glycols (i.e. ethylene glycol (EG), propylene glycol (PG) and diethylene glycol (DEG)). As the first step, all the compositions were prepared by Cloisite 30B...
Polymerization and polymer characterization of n-vinylcaprolactam
Polat, Özlem; Usanmaz, Ali; Department of Polymer Science and Technology (2005)
In this study, N-vinylcaprolactam was polymerized by radiation in the solid state. The polymerization was carried out at room temperayure under vacuum and open to atmosphere respectively. The polymerization mechanism showed autoacceleration and the rate of polymerization was higher in the presence of oxygen. However the limiting conversion was 100% under vacuum conditions and 90% in the present of oxygen. This is due to the low molecular weight olgomer formation in the presence of oxygen. The polymers were ...
ELECTROINITIATED COPOLYMERIZATION OF ISOPRENE WITH INDENE
KHURSHID, A; Toppare, Levent Kamil; Akbulut, Ural (1987-09-01)
Citation Formats
N. Balcı, “Electrochemically prepared conducting polymer grafts of pyrrole,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr