Behavior of brick infilled reinforced concrete frames under reversed cyclic loading

Download
068313.pdf
1997
Marjani, Farzad
Show full item record
121
views
29
downloads
Structural frames., Reinforced concrete, Cocrete construction, Strength of materials.
https://hdl.handle.net/11511/1359
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Strengthening of reinforced concrete frames with reinforced concrete infills
Altın, Sinan; Ersoy, Uğur; Department of Civil Engineering (1990)
Modelling effects of insufficient lap splices on a deficient reinforced concrete frame
Lin, Wesley Wei -Chih; Sucuoğlu, Haluk; Binici, Barış; Department of Earthquake Engineering and Engineering Seismology (2013)
In order to reduce seismic risk in vulnerable buildings, buildings identified to be at risk should be assessed and strengthened. Performance evaluation of deficient buildings has become a major concern due to devastating earthquakes in the past. In order to justify new provisions in design and assessment codes, experiments and analyses are inherently necessary. In this thesis study, investigations into the behaviour of two deficient reinforced concrete frames built at Middle East Technical University’s Str...
Strengthening of brick infilled rc frames with cfrp reinforcement-general principles
Akın, Emre; Özcebe, Güney; Department of Civil Engineering (2011)
There is an excessive demand for the rehabilitation of frame type reinforced concrete (RC) buildings which do not satisfy current earthquake code provisions. Therefore, it is imperative to develop user-friendly seismic strengthening methodologies which do not necessitate the evacuation of building during rehabilitation period. In this study, it was aimed to strengthen the brick infill walls by means of diagonal Carbon Fiber-Reinforced Polymer (CFRP) fabrics and to integrate them with the existing structural...
Contribution of reinforced concrete infills to seismic behavior of structural systems
Canbay, Erdem; Ozcebe, G (2003-09-01)
The object of this paper is to report an experimental investigation on the internal force distribution in reinforced concrete (RC) frames with added RC walls. The paper describes a special test setup and force transducers designed to determine the internal forces. The transducers were designed so that the stiffness change in the column would be minimal. The paper reports the results of a test in which a 1/3-scale, two-story, three-bay RC frame was first subjected to damaging lateral-drift reversals and was ...
Detailed evaluation of an existing reinforced concrete building damaged under its own weight
Bayraktar, Atilla; Yakut, Ahmet; Department of Civil Engineering (2011)
A significant part of the Turkey’s building inventory consists of reinforced concrete frame structures. In addition to that a big part of the existing building inventory in Turkey shows insufficiency in seismic performance damage or failure of structures under their own loads has also been observed. The failure of Zümrüt Apartment building that occurred in 2004 in Konya and resulted in the death of 92 people brings the necessity of researches on robustness and reserve capacities of the buildings under gravi...
Citation Formats
F. Marjani, “Behavior of brick infilled reinforced concrete frames under reversed cyclic loading,” Ph.D. - Doctoral Program, Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr