A recommended neural trip distributon model

Download
2004
Tapkın, Serkan
In this dissertation, it is aimed to develop an approach for the trip distribution element which is one of the important phases of four-step travel demand modelling. The trip distribution problem using back-propagation artificial neural networks has been researched in a limited number of studies and, in a critically evaluated study it has been concluded that the artificial neural networks underperform when compared to the traditional models. The underperformance of back-propagation artificial neural networks appears to be due to the thresholding the linearly combined inputs from the input layer in the hidden layer as well as thresholding the linearly combined outputs from the hidden layer in the output layer. In the proposed neural trip distribution model, it is attempted not to threshold the linearly combined outputs from the hidden layer in the output layer. Thus, in this approach, linearly combined iv inputs are activated in the hidden layer as in most neural networks and the neuron in the output layer is used as a summation unit in contrast to other neural networks. When this developed neural trip distribution model is compared with various approaches as modular, gravity and back-propagation neural models, it has been found that reliable trip distribution predictions are obtained.

Suggestions

A new approach to neural trip distribution models: NETDIM
Tapkin, Serkan; Akyilmaz, Ozdemir (Informa UK Limited, 2009-01-01)
This paper develops and presents a new neural network approach to model trip distribution, which is one of the important phases of conventional four-step travel demand modelling. The trip distribution problem has been investigated using back-propagation artificial neural networks in a number of studies and it was concluded that back-propagation artificial neural networks underperform when compared to traditional models. Such underperformance is due to the thresholding of the linearly combined inputs by util...
A unifying grid approach for solving potential flows applicable to structured and unstructured grid configurations
Cete, A. Ruhsen; Yuekselen, M. Adil; Kaynak, Uenver (Elsevier BV, 2008-01-01)
In this study, an efficient numerical method is proposed for unifying the structured and unstructured grid approaches for solving the potential flows. The new method, named as the "alternating cell directions implicit - ACDI", solves for the structured and unstructured grid configurations equally well. The new method in effect applies a line implicit method similar to the Line Gauss Seidel scheme for complex unstructured grids including mixed type quadrilateral and triangle cells. To this end, designated al...
An adaptive fully discontinuous Galerkin level set method for incompressible multiphase flows
KARAKUS, Ali; WARBURTON, Tim; AKSEL, MEHMET HALUK; Sert, Cüneyt (Emerald, 2018-01-01)
Purpose This study aims to focus on the development of a high-order discontinuous Galerkin method for the solution of unsteady, incompressible, multiphase flows with level set interface formulation.
A methodology for lining design of circular mine shafts in different rock masses
Öztürk, Hasan (2016-09-01)
In this study, the finite element numerical modelling of 2D shaft sections in a Hoek-Brown medium are carried out in a non-hydrostatic stress state in an attempt to predict pressures developing around mine shafts. An iterative process of applying support pressure until observing no failure zone around the shaft is used to simulate the required lining support pressure for different shaft models. Later, regression analysis is carried out to find a generic shaft pressure equation representing the rock mass and...
A Two stage approach for hybrid-assembly line design
Şimşek, Doğukan; Kırca, Ömer; Department of Industrial Engineering (2014)
The aim of the study is to propose an approach for hybrid assembly line design in the make-to-order and mixed-model environment. In this context, the main goal is to reduce lead-time, which is one of the key concepts of competitive markets. A systematic approach was employed for designing of hybrid assembly line in order to achieve the goal. The line is divided into two parts in a hybrid system: while the first part of the line works as a closed-loop system for instant replenishment of Constant Work in Prog...
Citation Formats
S. Tapkın, “A recommended neural trip distributon model,” Ph.D. - Doctoral Program, Middle East Technical University, 2004.