Synthesis of iron borophosphates and phosphates with zeo-type structures

Download
2004
Tuncel, Selcan
New iron phosphate and borophosphate compounds were synthesized and characterized by single crystal/powder X-ray diffraction, infrared spectroscopy, raman spectroscopy, thermogravimetric analysis, electron microscopy and elemental analysis. Using several compositions, Fey B(PO4)x type of compounds were attempted to be prepared by solid state reactions. The solid state reactions of boron compounds with a phosphating agent has been completed at 950oC. A new product Fe2BP3O12 is synthesized and indexed in this work which is isostructural with Cr2 BP3O12 A single crystal of iron ammonium phosphate, (NH4)3-xHxFeP3O12, was synthesized by a hydrothermal method and characterized. Its X-ray powder diffraction pattern was indexed in orthorhombic system. The unit cell parameters were found to be as a = 7.775 (A), b = 7.445(A), c = 14.331(A) The compound with the formula NH4FeBP2O8OH was synthesized by hydrothermal method. Its X-ray powder diffraction pattern was indexed in monoclinic system. The unit cell parameters were found to be a = 9.336, b = 8.278, c =9.642A, and x = 101.60o, which are good agreement with the literature values. Ferro-axinite type of compound was discovered as single crystals resembling the axinite mineral. The compound was indexed in triclinic system with the unit cell parameters of a = 7.167, b = 8.840 , c = 9.455A, a = 64.83o, d = 64.83o, ? = 69.42o. A zeotype Fe(H2O)2BP2O8.H2O, which was obtained by hydrothermal methods before, was synthesized by a precipitation method using different initial reactant. In this case, instead of Fe+2, Fe+3 compound was used as a reactant. All the compounds have been investigated by FTIR spectroscopy and the assignments of the functional BO3, BO4 and PO4 groups have been done.

Suggestions

Synthesis and characterization of rare earth borophosphates
Özdil, Yasemin; Kızılyallı, Meral; Department of Chemistry (2004)
In this thesis, solid state reactions of Ln2O3, Y2O3, B2O3 and (NH4)2HPO4 were investigated to synthesize LnBP2O8 (Ln= Dy, Ho, Er) and YBP2O8 type of borophosphates which were not reported before. The products were analyzed by XRD, IR, DTA, SEM and EDX methods. In the first part of this thesis, synthesis of YBP2O8 through the solid state reaction of Y2O3 + 4(NH4)2HPO4 + B2O3 have been studied in the range 800-1140 °C. Orthophosphates of Dysprosium, Holmium, Erbium and Yttrium have tetragonal xenotime (YPO4)...
Synthesis and characterization of nanosized calcium phosphates by flame spray pyrolysis, and their effect on osteogenic differentiation of stem cells
Ataol, Sibel; Tezcaner, Ayşen; Duygulu, Ozgur; Keskin, Dilek; Machin, Nesrin E. (2015-02-14)
The present study evaluates the synthesis of biocompatible osteoconductive and osteoinductive nano calcium phosphate (CaP) particles by industrially applied, aerosol-derived flame spray pyrolysis method for biomedical field. Calcium phosphate nanoparticles were produced in a range of calcium-to-phosphorus ratio, (1.20-2.19) in order to analyze the morphology and crystallinity changes, and to test the bioactivity of particles. The characterization results confirmed that nanometer-sized, spherical calcium pho...
Synthesis, characterization and electrochromic properties of copolymer of 3-{[4-(thien-3-yl-methoxy)phenoxy]methyl} thiophene with thiophene
Erden, Ayca; Sahin, Elif; Gullu, Mustafa; Toppare, Levent Kamil (Elsevier BV, 2006-08-01)
(3- {[4-(Thien-3-yl-methoxy)phenoxy]methyl} thiophene) (TMPMT) was synthesized via the reaction of 3-bromomethyl-thiophene with hydroquinone and characterized by nuclear magnetic resonance (NMR) and Fourier transform infrared spectroscopy (FTIR). Electrochemical copolymerization of TMPMT with thiophene in acetonitrile/boron trifluoride diethyl etherate (AN/BFEE) solvent mixture was achieved using tetrabutylammonium tetrafluoroborate (TBAFB) as the supporting electrolyte. Resulting copolymer was characterize...
Preparation and thermal characterization of poly(2-vinylpyridine) copolymers coordinated to Cr nanoparticles
Öztürk, Yurdagül; Kayran, Ceyhan; Hacaloğlu, Jale (2015-06-01)
In this study, polystyrene-block-poly(2-vinylpyridine), PS-b-P2VP, polyisoprene-block-poly(2-vinylpyridne), PI-b-P2VP and poly(methyl metacrylate)-block-poly(2-vinylpyridine), PMMA-b-P2VP, coordinated to Cr metal were synthesized and characterized by Fourier transform infrared, transmission electron microscopy and direct pyrolysis mass spectrometry techniques. Both thermal degradation mechanism and thermal stability of P2VP blocks were affected by the coordination of Cr nanoparticles to nitrogen of pyridine...
LANTHANUM DOPED DICALCIUM PHOSPHATE MIXED WITH GRAPHENE OXIDE BONE CEMENTS AS A POTENTIAL MATERIAL IN BIOMEDICAL APPLICATIONS
Motameni, Ali; Evis, Zafer; -, -; Department of Engineering Sciences (2021-9-06)
In this thesis, mesoporous particles of β-tricalcium phosphate (βTCP, βCa3(PO4)2) and lanthanum (La) doped βTCP were synthesized by wet precipitation method attached with a microwave refluxing system. Pure dicalcium phosphate (DCP) and La modified dicalcium phosphate (La-DCP) bone cements were prepared based on acid/base reaction between βTCP (or La- βTCP) and monocalcium phosphate monohydrate (MCPM) in the presence of water. DCP bone cements were also mixed with 1.5-3.5wt.% of graphene oxide (GO). The obta...
Citation Formats
S. Tuncel, “Synthesis of iron borophosphates and phosphates with zeo-type structures,” M.S. - Master of Science, Middle East Technical University, 2004.