Transient dynamic response of viscoelastic cylinders enclosed in filament wound cylindrical composites

Download

index.pdf

Date

2005

Author

Şen, Özge

Metadata

Show full item record

Item Usage Stats

377
views

109
downloads

In this study, transient dynamic response of viscoelastic cylinders enclosed in filament wound cylindrical composites is investigated. Thermal effects, in addition to mechanical effects, are taken into consideration. A generalized thermoelasticity theory which incorporates the temperature rate among the constitutive variables and is referred to as temperature-rate dependent thermoelasticity theory is employed. This theory predicts finite heat propagation speeds. The body considered in this thesis consists of n+1-layers, the inner layer being viscoelastic, while the outer fiber reinforced composite medium consist of n-different generally orthotropic, homogeneous and elastic layers. In each ply, the fiber orientation angle may be different. The body is a hollow circular cylinder with a finite thickness in the radial direction, whereas it extends to infinity in the axial direction. The multilayered medium is subjected to uniform time-dependent dynamic inputs at the inner and/or outer surfaces. The body is assumed to be initially at rest. The layers are assumed to be perfectly bonded to each other. The case in which the inner surface of the viscoelastic cylinder is a moving boundary is further investigated in this study. This is similar to the solid propellant rocket motor cases. The solid propellant is modelled as a viscoelastic material which in turn is modelled as standard linear solid; whereas, the rocket motor case is a fiber-reinforced filament wound cylindrical composite. Method of characteristics is employed to obtain the solutions. Method of characteristics is suitable because the governing equations are hyperbolic. The method is amenable to numerical integration and different boundary, interface and initial conditions can be handled easily.

Subject Keywords

Mechanical engineering.

URI

http://etd.lib.metu.edu.tr/upload/12606412/index.pdf
https://hdl.handle.net/11511/15781

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Fully Coupled Smoothed Particle Hydrodynamics-Finite Element Method Approach for Fluid-Structure Interaction Problems With Large Deflections Dincer, A. Ersin; Demir, Abdullah; Bozkuş, Zafer; Tijsseling, Arris S. (ASME International, 2019-08-01) In this study, a combination of the smoothed particle hydrodynamics (SPH) and finite element method (FEM) solving the complex problem of interaction between fluid with free surface and an elastic structure is studied. A brief description of SPH and FEM is presented. Contact mechanics is used for the coupling between fluid and structure, which are simulated with SPH and FEM, respectively. In the proposed method, to couple meshfree and mesh-based methods, fluid and structure are solved together by a complete ...
Exact solution of rotating FGM shaft problem in the elastoplastic state of stress Akis, Tolga; Eraslan, Ahmet Nedim (Springer Science and Business Media LLC, 2007-10-01) Plane strain analytical solutions to estimate purely elastic, partially plastic and fully plastic deformation behavior of rotating functionally graded (FGM) hollow shafts are presented. The modulus of elasticity of the shaft material is assumed to vary nonlinearly in the radial direction. Tresca's yield criterion and its associated flow rule are used to formulate three different plastic regions for an ideal plastic material. By considerina different material compositions as well as a wide range of bore radi...
Numerical analysis of ablation process on a two dimensional external surface Aykan, Fatma Serap; Dursunkaya, Zafer; Department of Mechanical Engineering (2005) The thermal response analysis of an ablative material on a two dimensional external surface is performed. The method is applied to both rectangular and cylindrical coordinate systems, where rectangular coordinate system is used for comparison with results available in literature. The current study solves the decomposition of the material at high temperatures by using the nth order Arrhenius equation but excludes the removal of char from the surface due to mechanical erosion or phase change and considers tha...
Analysis of single phase convective heat transfer in microchannels with variable thermal conductivity and variable viscosity Gözükara, Arif Cem; Güvenç Yazıcıoğlu, Almıla; Department of Mechanical Engineering (2010) In this study simultaneously developing single phase, laminar and incompressible flow in a micro gap between parallel plates is numerically analyzed by including the effect of variation in thermal conductivity and viscosity with temperature. Variable property solutions for continuity, momentum and energy equations are performed in a coupled manner, for air as a Newtonian fluid. In these analyses the rarefaction effect, which is important for the slip flow regime, is taken into account by imposing slip veloc...
Analysis of thin walled open section tapered beams using hybrid stress finite element method Akman, Mehmet Nazım; Oral, Süha; Department of Mechanical Engineering (2008) In this thesis, hybrid stress finite element is formulated for the analysis of the isotropic, thin walled, open section beams with variable cross sections. The beam element has two nodes each having seven degrees of freedom. Assumption of stress field is sufficient to determine the element stiffness matrix. Axial, flexural and torsional effects are taken into account in the analysis. The methodology can be applied both to the tapered and the uniform beams. Throughout this study, firstly element cross-sectio...

Citation Formats

Ö. Şen, “Transient dynamic response of viscoelastic cylinders enclosed in filament wound cylindrical composites,” Ph.D. - Doctoral Program, Middle East Technical University, 2005.