EMI filter design for high frequency high power SMPS

Download
075769.pdf
1998
Eriştiren, Yalım
Show full item record
113
views
0
downloads
https://hdl.handle.net/11511/1611
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Broadband Impedance Transformation by Defected Dielectric on Microstrip Lines
Kaya, Tevfik; Nesimoglu, Tayfun (2018-11-02)
In this work, a different approach to achieve a desired characteristic impedance value on microstrips is presented. In standard microwave circuits using microstrip lines, the dielectric thickness is same and uniform across the whole circuit. In this paper, it is proposed to modify the dielectric thickness to achieve a certain design goal by creating variations in the characteristic impedance of the microstrip transmission line without changing the width of the line. The proposed approach is applied to a mul...
BROADBAND HIGH EFFICIENCY RF POWER AMPLIFIER DESIGN BASED ON MODIFIED CLASS-J APPROACH WITH APPLICATIONS USING GAN HEMT TECHNOLOGY
Koç, Murat; Demir, Şimşek; Department of Electrical and Electronics Engineering (2021-9-29)
RF power amplifiers have been the essential elements of any transmit/receive block. Especially in the transmit chain, some applications require high RF power, such as radar, jammer, telecommunication signals targeting a wide range of coverage. High power requirements in RF broadcast mean high supply power to feed RF PA. The efficiency parameter of a high-power transmission system becomes an issue due to heating problems and performance degradation depending on rising temperatures. The heating problem is com...
Broadband microwave diode mixer design and implementation
Koç, Emrah; Demir, Şimşek; Department of Electrical and Electronics Engineering (2016)
Mixers play a critical role in design and development of wireless communication systems. Demanding requirements of the mixers are improvements in conversion efficiency, bandwidth, cost, and linearity. Schottky barrier diodes attract mixer designers due to their favorable characteristics leading to wide bandwidth, low-cost, and high efficient designs. This thesis demonstrates the design and implementation of two passive mixing circuits using Schottky barrier diodes at microwave frequencies. The first circuit...
Microwave GaAs fet low noise amplifier design
Yaraş, Nevzat; Toker, Canan; Department of Electrical and Electronics Engineering (1989)
Electromagnetic target recognition with the fused MUSIC spectrum matrix method: Applications and performance analysis for incomplete frequency data
Secmen, Mustafa; Ekmekci, Evren; Sayan, Gönül (2007-01-01)
The aim of this paper is to apply an electromagnetic target recognition method, which is based on the use of fused MUSIC spectrum matrices, to the case of incomplete frequency domain data. The aforementioned method was suggested recently and succesfully applied to both canonical and complicated targets in the presence of complete frequency domain data [1]. However, most of the real world applications involve the use of severely incomplete frequency data, especially missing low frequency information. In this...
Citation Formats
Y. Eriştiren, “EMI filter design for high frequency high power SMPS,” Middle East Technical University, 1998.
METU IIS - Integrated Information Service open@metu.edu.tr