Modeling of tempering of frozen potato puree by microwave, infrared assisted microwave and ohmic heating methods

Download

index.pdf

Date

2008

Author

Seyhun, Nadide

Metadata

Show full item record

Item Usage Stats

255
views

72
downloads

The main purpose of this thesis is to develop a model that can predict the temperature profile inside a frozen food sample during microwave tempering and infrared assisted microwave tempering processes. Another goal of the study is to compare the tempering time of frozen foods by using microwave, infrared assisted microwave, and ohmic heating methods. Frozen potato puree was used as the food sample for all studies. Three different microwave power levels (30%, 40%, and 50%) were used for microwave tempering studies. Three different microwave power levels (30%, 40%, and 50%) and three different infrared power levels (10%, 20%, and 30%) were combined for infrared assisted microwave tempering. As a control, tempering was done by keeping the sample at 4°C. The increase in microwave power level and infrared power level reduced tempering time in infrared assisted microwave tempering. For the ohmic tempering studies, three different frequencies (10 kHz, 20 kHz, and 30 kHz) and three different salt contents (0.50%, 0.75%, and 1.00%) were used. The increase in frequency of ohmic heating and salt content also decreased tempering times. Microwave tempering and infrared assisted microwave tempering of frozen foods were simulated by using finite difference method. For this purpose, the change in heat capacity and the dielectric properties of frozen potato puree with respect to time were measured. The temperature distribution inside the sample was modeled, and the predicted results were compared with experimental results. The predicted temperatures showed good agreement with the experimental data (r2 > 0.985). It was possible to decrease tempering times by about 75%, 90%, and 95% using ohmic, microwave, and infrared assisted microwave tempering methods, respectively as compared to control.

Subject Keywords

Food Processing and Manufacture.

URI

http://etd.lib.metu.edu.tr/upload/12609666/index.pdf
https://hdl.handle.net/11511/18033

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Optimization of microwave-halogen lamp baking of bread Demirekler, Pınar; Şümnü, Servet Gülüm; Department of Food Engineering (2004) The main objective of this study was to optimize the processing conditions of breads baked in halogen lamp-microwave combination oven by using response surface methodology. It was also aimed to construct neural network models for the prediction of quality parameters of bread as a function of processing conditions. Different baking time and power combinations were used in order to find the optimum baking conditions of bread in halogen lamp-microwave combination oven. The independent variables were the baking...
Comparison and modeling of microwave tempering and infrared assisted microwave tempering of frozen potato puree Seyhun, N.; Ramaswamy, H.; Şümnü, Servet Gülüm; Şahin, Serpil; Ahmed, J. (Elsevier BV, 2009-06-01) Microwave tempering and infrared assisted microwave tempering of frozen foods were simulated by using finite difference method. The effects of microwave power and infrared power on tempering were discussed. Three different microwave power levels (30%, 40%, and 50%) and three different infrared power levels (10%, 20%, and 30%) were used. The increase in microwave power level and infrared power level decreased tempering times. The change of heat capacity and the dielectric properties of frozen potato puree wi...
Investigation of physical properties of different cake formulations during baking with microwave and infrared-microwave combination Şakıyan Demirkol, Özge; Şümnü, Servet Gülüm; Department of Food Engineering (2007) The main objective was to determine the variation of physical properties of different cake formulations during baking in microwave and infrared-microwave combination ovens. In the first part of the study, rheological and dielectric properties of cake batter with different formulations were determined. Different concentrations of fat and different types of emulsifier and fat replacer were used. The variation of formulation had a significant effect on the apparent viscosity of the cake batter. Cake batter was...
Effect of high hydrostatic pressure (HHP) and high dynamic pressure (HDP) on stability and rheological properties of model oil-in-water emulsions Bigikoçin, Erman; Alpas, Hami; Mert, Behiç; Department of Food Engineering (2010) High pressure applications are alternatives to conventional methods in food processing. They provide interesting modifications in food structures which leads to new product formulations. The aim of this study is to identify the effects of two different treatments, high hydrostatic pressure (HHP) and high dynamic pressure (HDP) on stability and rheological properties of model oil-in-water emulsions. Microfluidization was selected among the HDP homogenization techniques. The performance of each process was an...
Infrared-assisted microwave drying in the production of bread crumbs Tireki, Suzan; Şümnü, Servet Gülüm; Department of Food Engineering (2005) This study is aimed to investigate the possibility of using halogen lamp-microwave combination oven for production of bread crumbs and to determine the drying conditions in this oven to produce bread crumbs with the highest quality. Bread crumb dough was dried from about 40.9% to 8% moisture content by conventional oven, microwave, infrared and infrared-assisted microwave drying. In the experiments 30%, 50% and 70% halogen lamp and/or microwave powers were used. As a control, conventional oven drying at 75°...

Citation Formats

N. Seyhun, “Modeling of tempering of frozen potato puree by microwave, infrared assisted microwave and ohmic heating methods,” Ph.D. - Doctoral Program, Middle East Technical University, 2008.