Design, implementation, and control of a twostage ac/dc isolated power supply with high input power factor and high efficiency

Download

index.pdf

Date

2008

Author

Kaya, Mehmet Can

Metadata

Show full item record

Item Usage Stats

326
views

247
downloads

In this thesis a two-stage AC/DC/DC power converter is designed and implemented. The AC/DC input stage of the converter consists of the twophase interleaved boost topology employing the average current mode control principle. The output stage consists of a zero voltage switching phase shifted full bridge (ZVSPSFB) DC/DC converter. For the input stage, main design goals are obtaining high input power factor, low input current distortion, and well regulated output dc voltage, and obtaining these attributes in a power converter with high power density. For the input stage, the interleaved structure has been chosen in order to obtain reduced line current ripple and EMI, reduced power component stresses, and improved power density. The control of the preregulator is provided by utilizing a new commercial monolithic integrated circuit, which provides interleaved continuous conduction mode power factor correction (PFC). The output stage is formed by utilizing the available prototype hardware of a ZVSPSFB DC/DC converter and mainly the system integration and controller design and implementation studies have been conducted. The converter small signal model is derived and utilizing its transfer function and employing voltage loop control, the output voltage regulator has been designed. The output voltage controller is implemented utilizing a digital signal processor (DSP). Integrating the AC/DC preregulator and DC/DC converter, a laboratory AC/DC/DC converter system with high overall performance has been obtained. The overall system performance has been verified via computer simulations and experimental results obtained from laboratory prototype.

Subject Keywords

Electrical engineering.

URI

http://etd.lib.metu.edu.tr/upload/12610106/index.pdf
https://hdl.handle.net/11511/18086

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Design and implementation of a current source converter based active power filter for medium voltage applications Terciyanlı, Alper; Ermiş, Muammer; Department of Electrical and Electronics Engineering (2010) This research work is devoted to the design, development and implementation of a Current Source Converter (CSC) based Active Power Filter (APF) for Medium Voltage (MV) applications. A new approach has been proposed to the design of the CSC based APF for reducing the converter kVA rating considerably. This design approach is called the Selective Harmonic Amplification Method (SHAM), and is based on the amplification of some selected harmoniccurrent components of the CSC by the input filter, and the CSC contr...
Design of an educational purpose multifunctional dc/dc converter board Bağlan, Fuat Onur; Hava, Ahmet Masum; Department of Electrical and Electronics Engineering (2008) In this thesis a multifunctional DC/DC converter board will be developed for utilization as an educational experiment set in the switched-mode power conversion laboratory of power electronic courses. The board has a generic power-pole structure allowing for easy configuration of various power converter topologies and includes buck, boost, buck-boost, flyback, and forward converter topologies. All the converters can be operated in the open-loop control mode with a switching frequency range of 30-100 kHz and ...
Active clamped ZVS forward converter with soft-switched synchronous rectifier for high efficiency, low output voltage applications Acik, A; Cadirci, I (Institution of Engineering and Technology (IET), 2003-03-01) The analysis, design, and implementation of an active clamped ZVS forward converter equipped with a soft-switched synchronous rectifier (ACFC-SR), proposed for high-efficiency low output voltage DC-DC converter applications, is presented. The converter efficiency is maximised due to soft switching of the main, active clamp, synchronous rectifier, and freewheeling MOSFET switches. The operating principles of the ACFC-SR are analysed in detail, and the converter performance is compared with that of alternativ...
Analysis and modeling of high power microwave modules Yapıcı, A. Çağrı; Toker, Canan; Department of Electrical and Electronics Engineering (2004) A microwave module supplying up-to 1 Watt output power at 2.4-2.5 GHz frequency band was investigated. First the module was operated at low power levels and the output power was predicted using the small signal S-parameters of the module. A method was developed to obtain its large signal model using Advanced Design System (ADS) simulator̕s nonlinear analyses facilities. Later using the large signal model of the module simulations carried out to obtain larger powers up-to 1 Watt. The implementation of the mo...
Continuation power flow and voltage stability in power systems Keskin, Mehmet B; Ertaş, Arif; Department of Electrical and Electronics Engineering (2007) This thesis investigates an important power system phenomenon, voltage stability, by using continuation power flow method. Voltage collapse scenario is presented which can be a serious result of voltage instability and the parameters that affect voltage collapse are discussed. In analyzing power system voltage stability, continuation power flow method is utilized which consists of successive load flows. This method is applied to a sample test system and Turkish Power System and load-voltage curves for sever...

Citation Formats

M. C. Kaya, “Design, implementation, and control of a twostage ac/dc isolated power supply with high input power factor and high efficiency,” M.S. - Master of Science, Middle East Technical University, 2008.