An investigation of the principles of laboratory-scale particle-bed comminution

Download

index.pdf

Date

2008

Author

Cimilli, Hande

Metadata

Show full item record

Item Usage Stats

173
views

38
downloads

The objective of this thesis is to investigate the principles of laboratory-scale particle bed comminution in a piston-die-press. The feed materials used in this investigation are quartz and calcite which were stage-crushed and dry screened to produce 3.35 x 2.36, 2.36 x 1.7, 1.7 x 1.18, 1.18 x 0.85, and minus 0.85mm size fractions. First, these narrow size fractions (excluding minus 0.85mm fraction) were comminuted under different pressures to determine the baseline for energy utilization. Then, these size fractions and minus 0.85mm size fraction were proportionately mixed to produce feeds of three different size distributions having three different Gates-Gaudin-Schuhmann (GGS) size distribution moduli (m=0.5, 0.7, and 0.9), and comminuted under different bed pressures of appropriate magnitudes to generate a reasonable range of specific breakage energy inputs. As a result of the experiments carried out, it can be concluded that higher amounts of fines were obtained from calcite samples than quartz at all narrow-range size fractions and distribution moduli. Furthermore, experimental results showed that the feed material having the widest size distribution (m = 0.5) showed more resistance to size reduction when compared with narrow-size fractions, which led to increase in energy consumption due to the presence of higher amounts of fines. Tests samples with distribution moduli of 0.7 and 0.9 showed higher resistance to size reduction than narrow-size samples, but the reduction ratios achieved with the size distributed samples were higher than those achieved with the narrow-size samples. In addition, by using t-curves (t50 and t10) the amounts of breakage of different samples were compared. Consequently, the distribution modulus of 0.9 gave better breakage results in terms of expended energy and amount of breakage than all narrow-size fractions, especially for the relatively soft mineral calcite.

Subject Keywords

Mechanical engineering.

URI

http://etd.lib.metu.edu.tr/upload/12609481/index.pdf
https://hdl.handle.net/11511/18245

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Experimental investigation and modeling of dropwise condensation on a horizontal gold coated tube / Serdar, Orhan; Yamalı, Cemil; Department of Mechanical Engineering (2004) The phenomenon dropwise condensation on a horizontal gold coated tube is investigated by both analytical and experimental methods in this study. A computer program is prepared to calculate the dropwise condensation heat transfer rate on the horizontal gold coated tube. An experimental setup was also manufactured to measure the dropwise condensation heat transfer rate. The effects of flow rate, temperature of cooling water and also steam to wall temperature difference have been analytically investigated by u...
Analysis of thin walled open section tapered beams using hybrid stress finite element method Akman, Mehmet Nazım; Oral, Süha; Department of Mechanical Engineering (2008) In this thesis, hybrid stress finite element is formulated for the analysis of the isotropic, thin walled, open section beams with variable cross sections. The beam element has two nodes each having seven degrees of freedom. Assumption of stress field is sufficient to determine the element stiffness matrix. Axial, flexural and torsional effects are taken into account in the analysis. The methodology can be applied both to the tapered and the uniform beams. Throughout this study, firstly element cross-sectio...
Development of a micro-fabrication process simulator for micro-electro-mechanical systems(mems) Yıldırım, Alper; Dölen, Melik; Department of Mechanical Engineering (2005) The aim of this study is to devise a computer simulation tool, which will speed-up the design of Micro-Electro-Mechanical Systems by providing the results of the micro-fabrication processes in advance. Anisotropic etching along with isotropic etching of silicon wafers are to be simulated in this environment. Similarly, additive processes like doping and material deposition could be simulated by means of a Cellular Automata based algorithm along with the use of OpenGL library functions. Equipped with an inte...
Experimental investigation of a spherical solar collector Bakır, Öztekin; Yamalı, Cemil; Department of Mechanical Engineering (2006) The purpose of this study is to investigate the performance of a spherical solar collector by using numerical and experimental methods. For this analysis, equations were obtained by choosing appropriate control volumes in the system and applying The First Law of Thermodynamics. The experiments were realized at four different mass flow rates and non-flow situation. For the numerical simulation of the system, a computer program in Mathcad was written. Another computer program in Mathcad was written for the va...
Energy and exergy analyses of high school heating system Dilek, Murat; Baker, Derek Keıth; Department of Mechanical Engineering (2007) This thesis presents energy, exergy and economic analyses of the heating system of an existing building, the Konya Central Informatics Technical High School. The heat requirement for each room of the building is found by calculating heat losses. Radiator lengths that can provide the heat requirements are selected. For the exergy analysis, the system is divided into three parts: Heat generator, radiators and rooms. Comparisons are made according to minimum outdoor temperature, insulation quality of the struc...

Citation Formats

H. Cimilli, “An investigation of the principles of laboratory-scale particle-bed comminution,” M.S. - Master of Science, Middle East Technical University, 2008.