Performance evaluation of piezoelectric sensor/actuator on investigation of vibration characteristics and active vibration control of a smart beam

Download

index.pdf

Date

2010

Author

Arıdoğan, Mustafa Uğur

Metadata

Show full item record

Item Usage Stats

219
views

141
downloads

In this thesis, the performance of piezoelectric patches on investigation of vibration characteristics and active vibration control of a smart beam is presented. The smart beam is composed of eight surface-bonded piezoelectric patches symmetrically located on each side of a cantilever aluminium beam. At first, vibration characteristics of the smart beam is investigated by employment of piezoelectric patches as sensors and actuators. Smart beam is excited by either impact hammer or piezoelectric patch and the response of the smart beam particular to these excitations is measured by piezoelectric patches used as sensors. In order to investigate the performance of piezoelectric patches in sensing, the measurements are also conducted by commercially available sensing devices. Secondly, active vibration suppression of the smart beam via piezoelectric sensor/actuator pair is considered. For this purpose, system identification of the smart beam is conducted by using four piezoelectric patches as actuators and another piezoelectric patch as a sensor. The designed robust controller is experimentally implemented and active vibration suppression of the free and first resonance forced vibration is presented. Thirdly, active vibration control of the smart beam is studied by employment of piezoelectric patches as self-sensing actuators. Following the same approach used in the piezoelectric sensor/actuator pair case, system identification is conducted via self-sensing piezoelectric actuators and robust controller is designed for active vibration suppression of the smart beam. Finally, active vibration suppression via self-sensing piezoelectric actuators is experimentally presented.

Subject Keywords

Aerospace engineering., System Identification.

URI

http://etd.lib.metu.edu.tr/upload/12612005/index.pdf
https://hdl.handle.net/11511/19613

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Performance evaluation of piezoelectric sensor/actuator on active vibration control of a smart beam Şahin, Melin (SAGE Publications, 2011-01-01) In this paper the performance of a piezoelectric sensor/actuator pair and self-sensing piezoelectric actuator on the investigation of vibration characteristics and active vibration control of a smart beam are presented. The performance of piezoelectric patches on actuation and sensing is evaluated by investigating the vibration characteristics of the smart beam via various excitation mechanisms and transduction systems. For active vibration suppression of the smart beam, robust controllers are designed and ...
Application of Multivariate Adaptive Regression Splines to Sheet Metal Bending Process for Springback Compensation Dilan, Rasim Askin; Balkan, Raif Tuna; Platin, Bülent Emre (EDP Sciences; 2016-07-07) An intelligent regression technique is applied for sheet metal bending processes to improve bending performance. This study is a part of another extensive study, automated sheet bending assistance for press brakes. Data related to material properties of sheet metal is collected in an online manner and fed to an intelligent system for determining the most accurate punch displacement without any offline iteration or calibration. The overall system aims to reduce the production time while increasing the perfor...
Electroformed silicon nitride based light emitting memory device ANUTGAN, TAMİLA; ANUTGAN, MUSTAFA; ATILGAN, İSMAİL; Katircioglu, Bayram (2017-07-31) The resistive memory switching effect of an electroformed nanocrystal silicon nitride thin film light emitting diode (LED) is demonstrated. For this purpose, current-voltage (I-V) characteristics of the diode were systematically scanned, paying particular attention to the sequence of the measurements. It was found that when the voltage polarity was changed from reverse to forward, the previously measured reverse I-V behavior was remembered until some critical forward bias voltage. Beyond this critical volta...
Active vibration suppression of a smart beam via self sensing piezoelectric actuator Uğur, Arıdoğan; Şahin, Melin; Yaman, Yavuz; Volkan, Nalbantoğlu (null; 2009-08-17) In this paper, an active vibration suppression of a smart beam using self-sensing piezoelectric actuator is presented. The smart beam is composed of a cantilever aluminium beam with four surface-bonded piezoelectric patches symmetrically located both side of the beam. Piezoelectric materials can transform mechanical deformation to electric signal and vice versa. This property of piezoelectric materials enables them to be used as an actuator and a sensor. In self-sensing actuator configuration, the piezoelec...
Active neuro-adaptive vibration suppression of a smart beam Akin, Onur; Şahin, Melin (2017-12-01) In this research, an active vibration suppression of a smart beam having piezoelectric sensor and actuators is investigated by designing separate controllers comprising a linear quadratic regulator and a neural network. Firstly, design of a smart beam which consists of a cantilever aluminum beam with surface bonded piezoelectric patches and a designed mechanism having a micro servomotor with a mass attached arm for obtaining variations in the frequency response function are presented. Secondly, the frequenc...

Citation Formats

M. U. Arıdoğan, “Performance evaluation of piezoelectric sensor/actuator on investigation of vibration characteristics and active vibration control of a smart beam,” M.S. - Master of Science, Middle East Technical University, 2010.