Pressed lightweight masonry units from expanded ferrochromium slag

Download

075911.pdf

Date

1998

Author

Azanbaeva, Saoule K

Metadata

Show full item record

Item Usage Stats

42
views

0
downloads

URI

https://hdl.handle.net/11511/2028

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Stabilized FEM solution of MHD duct flow with conducting cracks in the insulation Tezer, Münevver; AYDIN, SALİM TUTGUN (2023-05-15) In this paper, the numerical solution of the fully developed liquid–metal magnetohydrodynamic (MHD) flow is given in a rectangular duct under an external oblique magnetic field with no-slip and insulated walls containing crack regions. The coupled MHD flow equations are transformed first into decoupled convection–diffusion equations in terms of the velocity and induced magnetic field. Thus, we apply the SUPG stabilization in the finite element method (FEM) solution procedure for high values of Hartmann numb...
Punching shear reinforcement for flat plates Niksarlıoğlu, Buğra Baturay; Tankut, Tuğrul; Department of Civil Engineering (1998)
Printed cicuit board design using channel routing technique. Karasoy, Tanju; Department of Electrical Engineering (1984)
Cracked elastic annulus bonded to rigid cylinder Yılmaz, Engin; Geçit, M. Ruşen; Department of Engineering Sciences (2005) In this study, a long annulus bonded to a rigid cylinder containing an axisymmetric circumferential crack of width (d-c) at the midplane is considered. The material of the annulus is assumed to be linearly elastic and isotropic. The external surface of the annulus is free of stress. Surfaces of the crack are subject to distributed compressive loads. The Fourier and Hankel transform techniques are used to solve the governing equations which are reduced to a singular integral equation for crack surface displa...
High-volume natural pozzolan concrete for structural applications Uzal, Burak; Turani, Lutfullah; Mehta, P. Kumar (2007-09-01) This paper presents the results of preliminary studies on concrete mixtures containing high volumes of natural pozzolan-(50%- by mass of total cementitious materials) for- structural applications. Three different kinds, of natural pozzolans from. Turkish deposits were used to prepare the high-volume natural pozzolan (HVNP) concrete. mixtures. Two additional mixtures with a high-volume of low-calcium fly ash and granulated blast-furnace slag were also prepared for comparison purposes. In addition, a conventi...

Citation Formats

S. K. Azanbaeva, “Pressed lightweight masonry units from expanded ferrochromium slag,” Middle East Technical University, 1998.