Development of an iterative method for liquid-propellant combustion chamber instability analysis

Download

index.pdf

Date

2010

Author

Cengiz, Kenan

Metadata

Show full item record

Item Usage Stats

150
views

75
downloads

Controlling unsteady combustion induced gas flow fluctuations and the resultant motor vibrations is a very significant step in rocket motor design. It occurs when the unsteady heat release due to combustion happens to feed the acoustic oscillations of the closed duct forming a feed-back system. The resultant vibrations concerned may even lead to total failure of the rocket system unless analysed and tested thoroughly. This thesis aims developing a linear numerical analysis method for the growth rate of instabilities and possible mode shape of a liquid-propelled chamber geometry. In particular, A 3-D Helmholtz code, utilizing Culicks spatial averaging linear iterative method, is developed to find the form of deformed mode shapes iteratively to obtain possible effects of heat source and impedance boundary conditions. The natural mode shape phase is solved through finite volume discretization and the open-source eigenvalue extractor, ARPACK, and its parallel implementation PARPACK. The iterative method is particularly used for analyzing the geometries with complex shapes and essentially for disturbances of small magnitudes to natural mode shapes. The developed tools are tested via two simple cases, a duct with inactive flame and a Rijke tube, used as validation cases for the code particularly with only boundary contribution and heat contribution respectively. A sample 2-D and 3-D liquid-propelled combustion chamber is also analysed with heat sources. After comparing with the expected values, it is eventually proved that the method should be only used for determining the modes instability analysis, as to whether it keeps vibrating or decays. The methodology described can be used as a preliminary design tool for the design of liquid-propellant rocket engine combustors, rapidly revealing only the onset of instabilities.

Subject Keywords

Liquid propellant rockets, Aerospace engineering.

URI

http://etd.lib.metu.edu.tr/upload/12612753/index.pdf
https://hdl.handle.net/11511/20332

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Optimization of Flapping Motion Parameters for Two Airfoils in a Biplane Configuration Kaya, Mustafa; Tuncer, İsmail Hakkı; Jones, Kevin D.; Platzer, Max F. (American Institute of Aeronautics and Astronautics (AIAA), 2009-03-01) Flapping motion parameters of airfoils in a biplane configuration are optimized for maximum thrust and/or propulsive efficiency. Unsteady, viscous flowfields over airfoils flapping in a combined plunge and pitch are computed with a parallel flow solver on moving and deforming overset grids. The amplitudes of the sinusoidal pitch and plunge motions and the phase shift between them are optimized for a range of flapping frequencies. A gradient-based optimization algorithm is implemented in a parallel computing...
Computational study of flapping airfoil aerodynamics Tuncer, İsmail Hakkı (American Institute of Aeronautics and Astronautics (AIAA), 2000-05-01) Unsteady, viscous, low-speed flows over a NACA 0012 airfoil oscillated in plunge and/or pitch at various reduced frequency, amplitude, and phase shift are computed. Vortical wake formations, boundary-layer flows at the leading edge, the formation of leading-edge vortices and their downstream convection are presented in terms of unsteady particle traces. Flow separation characteristics and thrust-producing wake profiles are identified. Computed results compare well with water tunnel flow visualization and fo...
Mathematical model development of the anti torque system of a notar helicopter Bakır, Hüseyin Murat; Yavrucuk, İlkay; Department of Aerospace Engineering (2008) The anti-torque mechanism of a NOTAR helicopter is a complex system including vertical tail and pressurized tail boom which provides air ejection used for both circulation control around the boom and creating directed jet air at the end of the boom. This thesis targets the modeling of this mechanism and integrating it to a helicopter simulation model. Flight tests are performed on the MD 600N helicopter to verify the results. Finally, the simulation is compared with flight test data.
Simulation of Rapidly Maneuvering Airfoils with Synthetic Jet Actuators Jee, SolKeun; Lopez Mejia, Omar D.; Moser, Robert D.; Muse, Jonathan A.; Kutay, Ali Türker; Calise, Anthony J. (American Institute of Aeronautics and Astronautics (AIAA), 2013-08-01) Synthetic jet actuators are investigated for rapidly maneuvering airfoils that are regulated by a closed-loop control system. To support active flow-control simulations performed here, the closed-loop system and vehicle dynamics are coupled with computational fluid dynamics. High-frequency sinusoidal pitching simulations with and without synthetic jet actuation indicate that the current synthetic jet actuators provide bidirectional change in aerodynamic forces during rapid maneuvers whose time scales are of...
Numerical analysis of regenerative cooling in liquid propellant rocket engines Ulaş, Abdullah (2013-01-01) High combustion temperatures and long operation durations require the use of cooling techniques in liquid propellant rocket engines (LPRE). For high-pressure and high-thrust rocket engines, regenerative cooling is the most preferred cooling method. Traditionally, approximately square cross sectional cooling channels have been used. However, recent studies have shown that by increasing the coolant channel height-to-width aspect ratio and changing the cross sectional area in non-critical regions for heat flux...

Citation Formats

K. Cengiz, “Development of an iterative method for liquid-propellant combustion chamber instability analysis,” M.S. - Master of Science, Middle East Technical University, 2010.