X band two layer printed reflectarray with shaped beam

Download
index.pdf
2011
Üçüncü, Gökhan
Show full item record
29
views
94
downloads
X-band cosecant square shaped beam microstrip reflectarray is designed, fabricated and measured. Unit element of the reflectarray is in stacked patch configuration. With the aim of designing shaped beam pattern, phase-only synthesis method based on genetic algorithm is used. Phases of reflected electric field from antenna elements are adjusted by changing the dimensions of the patches. Unit cell simulations are performed using periodic boundary conditions and assuming infinite array approach to obtain reflection phase curves versus patch size. Then full reflectarray surface and its feed are designed and fabricated. Radiation patterns are measured in spherical near field range and results are compared with simulations. It is shown that the antenna is capable to operate in a band of 8.6 - 9.7 GHz.
Electrical Engineering., Electronics., Nuclear Engineering.
http://etd.lib.metu.edu.tr/upload/12613897/index.pdf
https://hdl.handle.net/11511/20840
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Estimation of deterministic and stochastic imu error parameters
Ünsal, Derya; Demirbaş, Kerim; Department of Electrical and Electronics Engineering (2012)
Inertial Measurement Units, the main component of a navigation system, are used in several systems today. IMU’s main components, gyroscopes and accelerometers, can be produced at a lower cost and higher quantity. Together with the decrease in the production cost of sensors it is observed that the performances of these sensors are getting worse. In order to improve the performance of an IMU, the error compensation algorithms came into question and several algorithms have been designed. Inertial sensors conta...
Performance of bilinear time-frequency transforms in isar
Loğoğlu, Berker; Dural Ünver, Mevlüde Gülbin; Department of Electrical and Electronics Engineering (2007)
In this thesis a stepped-frequency Inverse Synthetic Aperture Radar (ISAR) is employed to develop two-dimensional range-Doppler images of a small ghter aircraft which exhibits three dimensional rotational rotation. The simulation is designed such that the target can exhibit yaw, pitch and roll motions at the same time. First, radar returns from prominent scatterers of various parts of the target are processed and displayed using conventional Fourier transform. The e ects of di erent complex motion types an...
Implementation and performance evaluation of a three antenna direction finding system
Arslan, Ömer Çağrı; Tuncer, Temel Engin; Department of Electrical and Electronics Engineering (2009)
State of the art direction finding (DF) systems usually have several antennas in order to increase accuracy and robustness to certain factors. In this thesis, a three antenna DF system is built and evaluated. While more antennas give better DF performance, a three antenna system is useful for system simplicity and many of the problems in DF systems can be observed and evaluated easily. This system can be used for both azimuth and elevation direction of arrival (DOA) estimation. The system is composed of thr...
Design of dual polarized wideband microstrip antennas
Yıldırım, Meltem; Alatan, Lale; Department of Electrical and Electronics Engineering (2010)
In this thesis, a wideband dual polarized microstrip antenna is designed, manufactured and measured. Slot coupled patch antenna structure is considered in order to achieve the wideband characteristic. Although rectangular shaped slot coupled patch antennas are widely used in most of the applications, their utilization in dual polarized antenna structures is not feasible due to space limitations regarding the positioning of two separate coupling slots for each polarization. For a rectangular slot, the parame...
Design and fabrication of rf mems switches and instrumentation for performance evaluation
Atasoy, Halil İbrahim; Demir, Şimşek; Department of Electrical and Electronics Engineering (2007)
This thesis presents the RF and mechanical design of a metal-to-metal contact RF MEMS switch. Metal-to-metal contact RF MEMS switches are especially preferred in low frequency bands where capacitive switches suffer from isolation due to the limited reactance. Frequency band of operation of the designed switch is from DC to beyond X-band. Measured insertion loss of the structure is less than 0.2 dB, return loss is better than 30 dB, and isolation is better than 20 dB up to 20 GHz. Isolation is greater than 2...
Citation Formats
G. Üçüncü, “X band two layer printed reflectarray with shaped beam,” M.S. - Master of Science, Middle East Technical University, 2011.
METU IIS - Integrated Information Service open@metu.edu.tr