Structural and aeroelastic analyses of a composite tactical unmanned air vehicle

Download
index.pdf
2011
Özöztürk, Sedat
Show full item record
246
views
275
downloads
In this thesis, computational aerodynamics, structural and aeroelastic analyses of the composite tactical unmanned air vehicle which is designed and manufactured in the Department of Aerospace Engineering are performed. Verification of the structural integrity of the air vehicle is shown at the minimum maneuvering and the dive speeds at the static limit loads which are calculated by the computational aerodynamics analysis of the full aircraft model. In the current work, aerodynamic loads are re-calculated for more accurately determined dive speed angle of attack in an effort to match the overall vertical pressure load more closely to the half of the aircraft weight at the positive load factor. Finite element models of the fuselage, wing and the vertical-horizontal tail plane are prepared including the filament wound boom connecting the wing and the tail plane. Structural analyses of the composite wing, vertical and horizontal tail plane are performed under the limit aerodynamic loads calculated at the corner points of the V-N diagram using the structural finite element model of the wing-tail plane combination only. Global finite element analysis of the wing-tail plane combination showed that composite and isotropic materials of the wing-tail plane combination have positive margins of safety. Woven carbon and E-glass fabric that was procured to be used for the serial production version of the airplane are characterized for the tensile properties by the tests. Comprehensive aeroelastic stability analyses of the airplane are conducted by adding one sub-structure at a time to the aeroelastic model. Specifically, aeroelastic models which are used are the wing only, wing-tail plane combination, complete air vehicle with and without wing control surfaces. With such a study it is intended to address the effect each sub-structure adds to the aeroelastic model on the critical aeroelastic stability modes and speeds, and to see how sensitive the aeroelastic stability modes and speeds are to model fidelity. Detailed structural and aeroelastic analyses showed that the airplane has sufficient structural integrity under the action of static limit loads, and no aeroelastic instability is expected to occur within the flight envelope of the airplane.
Aerospace engineering., Aerodynamics., Aeronautics., Astronautics.
http://etd.lib.metu.edu.tr/upload/12613731/index.pdf
https://hdl.handle.net/11511/21043
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Structural design, analysis and composite manufacturing applications for a tactical unmanned air vehicle
Soysal, Sercan; Kayran, Altan; Department of Aerospace Engineering (2008)
In this study structural design, analysis and composite manufacturing applications for a tactical UAV, which was designed and manufactured in Aerospace Engineering Department of Middle East Technical University (METU), is introduced. In order to make an accurate structural analysis, the material and loading is modeled properly. Computational fluid dynamics (CFD) was used to determine the 3D pressure distribution around the wing and then the nodal forces were exported into the finite element program by means...
Design and analysis of an equipment rack structure of a medium transport aircraft
Yalçın, Mehmet Efruz; Yaman, Yavuz; Department of Aerospace Engineering (2009)
In this study, equipment rack structure for a medium transport aircraft was designed and finite element analysis of this design was performed. The equipment rack structure, which was designed for a modernization project, was positioned and dimensions were determined by regarding the geometry of primary structures of the aircraft. The structure was designed such that it satisfies the pre-defined margin of safety values. Design of the structure was prepared in Unigraphics, and the finite element modeling and ...
Design and analysis of a structural component of a heavy transport aircraft
Çıkrıkcı, Davut; Yaman, Yavuz; Department of Aerospace Engineering (2010)
This thesis aims to present the design and analysis of a structural component of a heavy transport aircraft. The designed component is the “coupling“ which is the interface member connecting two frames or two stringers in the fuselage assembly. The “frames”, which are the circumferential stiffeners, are joined together by the “frame couplings”. The “stringers”, which are the longitudinal stiffeners, are joined together by the “stringer couplings”. At the preliminary design phase; the structural design princ...
Structural optimization of a composite wing
Sökmen, Özlem; Akgün, Mehmet A.; Department of Aerospace Engineering (2006)
In this study, the structural optimization of a cruise missile wing is accomplished for the aerodynamic loads for four different flight conditions. The flight conditions correspond to the corner points of the V-n diagram. The structural analysis and optimization is performed using the ANSYS finite element program. In order to construct the flight envelope and to find the pressure distribution in each flight condition, FASTRAN Computational Fluid Dynamics program is used. The structural optimization is perfo...
Robust controller design for a fixed wing uav
Prach, Anna; Alemdaroğlu, Hüseyin Nafiz; Department of Aerospace Engineering (2009)
This study describes the design and implementation of the pitch and roll autopilots for a fixed wing unmanned vehicle. A Tactical Unmanned Aerial Vehicle (TUAV), which is designed at the Middle East Technical University (METU), is used as a platform. This work combines development of the classical and robust controllers, which are used for the pitch and roll autopilots. One of the important steps in the thesis is development of the non-linear dynamic model of the UAV, which is developed in MATLAB/Simulink e...
Citation Formats
S. Özöztürk, “Structural and aeroelastic analyses of a composite tactical unmanned air vehicle,” M.S. - Master of Science, Middle East Technical University, 2011.
METU IIS - Integrated Information Service open@metu.edu.tr