Design and analysis of an open loop fiber-optic gyroscope

Download
index.pdf
2012
Özdemir, Murat
Show full item record
159
views
97
downloads
Sensing rotation has been an essential topic in navigation and many other applications. Gyroscopes based on propagation of light beams over fixed distances have gained interest with the development of the laser. Since the 1970s, with the development of fiber optics these laser based gyroscopes have developed into compact devices, which can fit in the palm of your hand. In this thesis, we describe and analyze the development of a fiber-optic gyroscope. Fiber optic gyroscopes (also called fiber gyro or FOG) have been under development for different types of applications for more than 30 years all around the world. The physical basis of the fiber gyro is the Sagnac effect that was discovered in the early 1900s and is named after its discoverer. In this work, we first explain the principle of operation of the Sagnac effect and we derive the fundamental formulations in order to have an analytical understanding of the theory. Then, we examine the fiber optic gyro configuration component by component, starting with the laser diode pumped broadband light emitting Erbium-doped superfluorescent source. In addition, the principle of phase modulation, electro-optic phase modulators, fiber optic cables and fiber winding techniques, such as quadrupolar winding is explained within the context of development of the FOG. v The FOG that was assembled was based on circulation and sensing of broadband light centered around 1550nm. The fiber coil was 5km long in order to increase sensitivity in the FOG device. Since single-mode fibers were used steps were taken to ensure successful operation even with polarization dependent errors. The constructed system demonstrated a low sensitivity with a large uncertainty while sensing typical rotation rates. Reasons behind the errors and low sensitivity, as well as improvements that can be made are discussed.
Gyroscopes, Single-mode optical fibers.
http://etd.lib.metu.edu.tr/upload/12614126/index.pdf
https://hdl.handle.net/11511/21430
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Optimization of vibration characteristics of a radar antenna structure
Baran, İsmet; Özgen, Gökhan Osman; Ciğeroğlu, Ender; Department of Mechanical Engineering (2011)
Radar antenna structures especially array antennas which are integrated onto structures of aerial vehicles are subject to dynamic structural and aerodynamic loads. Due to occurrences of these dynamic loads there will be certain dynamic deformations which affect the antenna’s performance in an adverse manner. The influence of deformations and vibrations are important on array antenna structures, since they cause a change in orientation of elements of the phased array antenna which affects the gain of the ant...
Jammer cancelation by using space-time adaptive processing
Uysal, Halil; Severcan, Mete; Department of Electrical and Electronics Engineering (2011)
Space-Time Adaptive Processing (STAP) has been widely used in spaceborne and airborne radar platforms in order to track ground moving targets. Jammer is an hostile electronic countermeasure that is being used to degrade radar detection and tracking performance. STAP adapts radar’s antenna radiating pattern in order to reduce jamming effectiveness. Jamming power that enters the system is decreased with respect to the adapted radiation pattern. In this thesis, a generic STAP radar model is developed and imple...
Analysis and design of conformal frequency selective surfaces /
Dalkılıç, Akın; Alatan, Lale; Department of Electrical and Electronics Engineering (2014)
An efficient analysis and design approach for conformal frequency selective surface (FSS) structures is developed. The design methodology involves the analysis of both the planar and curved FSS structures. First, planar unit cell analysis of conformal FSS models are accomplished for normal and oblique incidence cases. To prove conformal applicability of planar designs, a semi-finite analysis method is utilized. This method is based on solution of a singly periodic curved FSS structure of semi-cylinder shape...
Investigation of Simulated Ground Penetrating Radar Data for Buried Objects Using Quadratic Time-Frequency Transformations
DOĞAN, MESUT; Sayan, Gönül (2017-07-14)
Sub-surface sensing is a challenging area of research that highly benefits from the use of ultra-wideband ground penetrating radar (GPR) technology. Detection and classification of buried objects with reduced false alarm rates is still open to improvements. Use of joint temporal and spectral target features obtained from electromagnetic GPR signals using time-frequency representation (TFR) methods is highly promising because TFRs provide detailed information about the energy distribution of GPR signals over...
Design of moving target indication filters with non-uniform pulse repetition intervals
İspir, Mehmet; Candan, Çağatay; Department of Electrical and Electronics Engineering (2013)
Staggering the pulse repetititon intervals is a widely used solution to alleviate the blind speed problem in Moving Target Indication (MTI) radar systems. It is possible to increase the first blind speed on the order of ten folds with the use of non-uniform sampling. Improvement in blind speed results in passband fluctuations that may degregade the detection performance for particular Doppler frequencies. Therefore, it is important to design MTI filters with non-uniform interpulse periods that have minimum ...
Citation Formats
M. Özdemir, “Design and analysis of an open loop fiber-optic gyroscope,” M.S. - Master of Science, Middle East Technical University, 2012.
METU IIS - Integrated Information Service open@metu.edu.tr