Experimental investigations on the performance characteristics of photo-galvanic and photo-electrochemical solar cells

Download

075637.pdf

Date

1998

Author

Bayer, İlker S

Metadata

Show full item record

Item Usage Stats

50
views

0
downloads

URI

https://hdl.handle.net/11511/2168

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Experimental investigation for mechanical properties of filament wound composite tubes Erdiller, Emrah Salim; Parnas, Kemal Levend; Department of Mechanical Engineering (2004)
Experimental Investigation of Crack Propagation Mechanisms in Commercially Pure Aluminium Plates Tekoğlu, C.; Çelik, Ş.; Duran, H.; Efe, M.; Nielsen, K.L. (Elsevier BV; 2019) The crack surface morphology in tearing of ductile metal plates depends on the mechanical properties, chemical composition and the microstructure of the plate material as well as on the loading conditions and the specimen geometry. This study assesses the crack surface morphologies observed in commercially pure aluminium plates (Al 1050 H14). Mode I tearing was performed in both single and double edge notched tensile test setups with specimens cut from five different plates with different thickness t, viz. ...
Experimental investigation of the effect of bends on the forced convection heat transfer in pipes. Özgü, Mustafa Ragıp; Department of Mechanical Engineering (1968)
Experimental investigation on machining parameters in wire electrical discharge machining (Wire E.D.M). Ardalı, Ahmet Tanju; Department of Mechanical Engineering (1985)
Experimental insight into the performance characteristics of Ni-mesh semiconductor photo-electrochemical cells Bayer, I; Eroğlu, İnci; Turker, L (Elsevier BV, 2000-04-15) The performance characteristics of two photo-electrochemical cells with different cell configurations were investigated at 25 degrees C and within the illumination range of 70-100 W/m(2). These cells included a jacketed single cell (JSC) and a jacketed two-compartment cell (JTC). Ni-mesh was used as a counter electrode and as a backing material for semiconductor electrodes. Semiconductor electrodes were prepared by silk-screen painting technique using TiO2, WO3, PbO, Sb2S3, ZnO, Al2O3 or CuO powder mixed wi...

Citation Formats

İ. S. Bayer, “Experimental investigations on the performance characteristics of photo-galvanic and photo-electrochemical solar cells,” Middle East Technical University, 1998.