Design of a medium range tactical UAV and improvement of its performance by using winglets

Download

index.pdf

Date

2014

Author

Turanoğuz, Eren

Metadata

Show full item record

Item Usage Stats

3962
views

450
downloads

The study encompasses the design, performance analysis and aerodynamic improvement of the designed medium range tactical unmanned aerial vehicle. Main requirements are set as following; cruising altitute above 3500m, endurance of approximately 10-12 hours, range of 150 km and payload of 60 kg. The conventional design phase is based on the employment of historical equations and experiences. Nowadays, employement of well known equations and experiences during the desing process are not enough to reveal a competitive design. A new design must encompass a wide scope improvement processes in various aspects in order to compete in today’s UAV market. The focal point of the thesis is not only to desing a conventional UAV based on well known mathematical equations and experiences, but also improve it aerodynamically by using numerical tools. A typical aerodynamic optimization process includes relationship between various parameters, notwithstanding, the improvement study performed in the thesis is based on increasing the span efficiency. For the depicted aim, a multidisciplinary comparison of various wingtip geometries have been performed. In conclusion, the study offers a cost effective aerodynamic improvement process by reducing engineering time and complicated algorithms for an UAV.

Subject Keywords

Vehicles, Remotely piloted., Drone aircraft., Airplanes, Aerodynamics.

URI

http://etd.lib.metu.edu.tr/upload/12617913/index.pdf
https://hdl.handle.net/11511/24092

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Design of A Medium Range Tactical UAV and Improvement of Its Performance by Using Winglets Turanoguz, Eren; Alemdaroglu, Nafiz (2015-06-12) This paper presents the design, performance analysis and aerodynamic improvement of a designed medium range tactical unmanned aerial vehicle. Main requirements are set as following; cruising altitute above 3500m, endurance of approximately 10-12 hours, range of 150 km and payload of 60 kg. The conventional design phase is based on the employment of historical equations and experiences. The aerodynamic improvement process is related with rise in span efficiency by employement and comparison of different wing...
Design and analysis of a hybrid trailing edge control surface of a fully morphing unmanned aerial vehicle wing Tunçöz, İlhan Ozan; Yaman, Yavuz; Department of Aerospace Engineering (2015) In this thesis, the design and analysis of a hybrid trailing edge control surface of a fully morphing unmanned aerial vehicle wing having the ability to perform both camber and decamber morphings were conducted. The design of the control surface was done by CATIA V5-6R2012 package program. Two distinct designs, so-called open cell and closed cell designs were initially analyzed via Finite Element Method by using the commercial software ANSYS Workbench v14.0 in in-vacuo condition. Several trade-off studies i...
Conceptual design of a stealth unmanned combat aerial vehicle with multidisciplinary design optimization Çakın, Uğur; Alemdaroğlu, Hüseyin Nafiz; Department of Aerospace Engineering (2018) The present study aims to develop a methodology for multi-disciplinary design optimization (MDO) of an unmanned combat aerial vehicle. At the current stage of optimization study, three disciplines are considered, which are aerodynamics, structural weight and radar cross section (RCS) signature. As objective functions, maximum range and minimum RCS signature are employed. To generate pareto-optimal solutions, multi-objective particle swarm optimization (MOPSO) function of MATLAB® is performed. To get aerodyn...
Design of a high speed decoy UAV Baykara, Umut; Alemdaroğlu, Hüseyin Nafiz; Department of Aerospace Engineering (2016) This study consists of design, CFD aerodynamic analysis and optimized selection of a high speed decoy UAV. The mission requirements for the high speed decoy are based upon the previous experiences in literature. The requirements are specified as: Maximum altitude of 15000 ft, maximum speed of 450 kts and an endurance of at least 1 hour. The decoy UAV is launched from a pneumatic catapult and lands via a parachute system. It is a highly agile aircraft having a very high maneuverability capability. The aircra...
Design and manufacturing of a high speed, jet powered target drone Özyetiş, Ender; Alemdaroğlu, Hüseyin Nafiz; Department of Aerospace Engineering (2013) This thesis presents the design and manufacturing of a high speed jet powered UAV which is capable of flying at M=0.5. Flight time of the UAV is 30 minutes at 1700 m above sea level. Aerodynamic and structural design of the UAV is conducted for 6g sustained and 9g instantaneous loads. Low aspect ratio blended wing-body design is decided due to low drag and high maneuverability. The Structure of the UAV consists of the composite parts such as frames and skin and mechanical parts such as landing gears which a...

Citation Formats

E. Turanoğuz, “Design of a medium range tactical UAV and improvement of its performance by using winglets,” M.S. - Master of Science, Middle East Technical University, 2014.