Adaptive structured and unstructured road detection using LIDAR and dome-camera

Download

index.pdf

Date

2017

Author

Demir, Sinan Özgün

Metadata

Show full item record

Item Usage Stats

342
views

224
downloads

Robotic ground vehicles are widely used in different road conditions to perform various tasks under semi- or fully-autonomous operation. To accomplish the given tasks, the vehicle should detect road regions accurately. Also, for a successful operation, the mobile robot requires a quick adaptation for changing road conditions. The objective of this study was developing an adaptive road detection algorithm for a semi-autonomous mobile platform (GOAT). For that purpose three different methods were developed for a robust classification of road regions ahead of the vehicle in both constructed and unconstructed environments. In the first method, LIDAR sensor was used to detect road regions by utilizing the data with adaptive parameter sets, which were estimated by utilizing discriminative learning approach. The experiments in structured environment showed that accuracy (ACC) of the output increased, while the false positive rate (FPR) decreased compared to the constant parameter approach. However, for the tests conducted in unstructured environment desired results were not obtained. Therefore, the second road detection algorithm based on visual and range measurement data needed to be developed. By this algorithm, approximately 50% decrease in the FPR values for both structured and unstructured road conditions was observed by filtering the segmented point cloud based on the hue color channel values. In the third road detection method, an online supervised learning algorithm was developed, which used the outputs of the second road detection algorithm to create and/or update visual road models. In the conducted experiments, it was shown that road regions and general road boundary behaviors can be detected both in front and back directions of the vehicle independent from the road shape.

Subject Keywords

Robotics., Robot vision., Computer vision.

URI

http://etd.lib.metu.edu.tr/upload/12621428/index.pdf
https://hdl.handle.net/11511/26816

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

An Adaptive Approach for Road Boundary Detection Using 2D LIDAR Sensor Demir, S. O.; Ertop, T. E.; Koku, Ahmet Buğra; Konukseven, Erhan İlhan (2017-11-18) Robotic ground vehicles are commonly used in various road conditions for performing special tasks with different levels of autonomy. This requires the robots to possess a certain degree of perception about the road conditions up ahead and make plans accordingly. It is essential for the robots to be able to quickly adapt their perception for various road conditions they operate. In this paper, an adaptive method for road boundary extraction using 2D LIDAR sensor is presented. A three-stage detection algorith...
DYNAMIC MODELING AND CONTROL OF AN ELECTROMECHANICAL CONTROL ACTUATION SYSTEM Yerlikaya, Umit; Balkan, Raif Tuna (2017-10-13) Electromechanical actuators are widely used in miscellaneous applications in engineering such as aircrafts, missiles, etc. due to their momentary overdrive capability, long-term storability, and low quiescent power/low maintenance characteristics. This work focuses on electromechanical control actuation systems (CAS) that are composed of a brushless direct current motor, ball screw, and lever mechanism. In this type of CAS, nonlinearity and asymmetry occur due to the lever mechanism itself, saturation limit...
Parallel shape optimization of a missile on a grid infrastructure Oktay, Erdal; Merttopcuoglu, Osman; Şener, Cevat; Ketenci, Ahmet; Akay, Hasan U. (2011-01-01) A computational tool is developed to be used in the preliminary design of an air vehicle. This tool parametrically optimizes the airframe shape. In order to search the entire solution space thoroughly, a genetic algorithm is used. Code parallelization is utilized to decrease the convergence time of the airframe shape design of a realistic missile geometry on a Grid infrastructure to further improve the search quality. In this work, a generic missile geometry is taken as a test case for a design application....
Dynamic simulation and performance optimization of a car with continuously variable transmission Güvey, Serkan; Ünlüsoy, Yavuz Samim; Department of Mechanical Engineering (2003) The continuously variable transmission (CVT), which has been in use in some of the vehicles in the market today, presents the possibility of decoupling the engine speed and the vehicle speed. By this way, it is now possible to operate the engine at its maximum efficient or performance point and fix it at that operating point without losing from the vehicle speed. Instead of using gears, which are the main transmission elements of conventional transmission, CVT uses two pulleys and a belt. By changing the pu...
Structural crashworthiness analysis of a ladder frame chassis subjected to full frontal and pole side impacts Dagdeviren, Semih; Yavuz, Mecit; Kocabas, M. Ozan; Unsal, Eren; Esat, Volkan (Informa UK Limited, 2016-01-01) Automobile chassis is a major element of structural crashworthiness in road motor vehicles. Various chassis geometry and topology research studies have been conducted to improve crash energy absorption characteristics of the chassis. In side impacts, crashworthiness of an automobile body depends not only on the chassis geometry and topology, but also on the design and reliability of other structural members such as B-pillar and side panels. This study aims to contribute to the investigations on the effects ...

Citation Formats

S. Ö. Demir, “Adaptive structured and unstructured road detection using LIDAR and dome-camera,” M.S. - Master of Science, Middle East Technical University, 2017.