Sorption enhanced reforming of ethanol over novel catalysts and microwave reactor application

Download
2018
Sarıyer, Merve
Environmental concerns and fast depletion of fossil fuel resources increased the research activities for the production of hydrogen from renewable sources. Hydrogen production through ethanol steam reforming reaction (SRE) has the potential to be used for its on board production on vehicles and with the sorption enhanced process (SESRE), use of CaO for in-situ removal of produced CO2 increases hydrogen production, decreasing the carbon dioxide and carbon monoxide amount. In this study nickel impregnated SBA-15, silica aerogel, commercial mesoporous carbon, the mesoporous carbon by METU were synthesized, characterized and tested in both the SRE and SESRE reactions. In addition to this, for the SESRE reaction, the effect of the divided section packing concept on the hydrogen purity was also investigated. All catalysts gave good catalytic activity in the SRE reaction. The best one was the 10Ni-SA catalyst with the high yield, stable product distribution and low coke formation compared to other catalysts at 600°C. In all the packing concepts, in the pre-breakthrough period, the mole percentage of the hydrogen was nearly 90 % for all catalysts. In the breakthrough period, decrease of hydrogen and increase of CO and CO2 mole fractions were observed, due to saturation of CaO with CO2. Moreover, in the SESRE-M experiments in post-breakthrough period, the mole percentage of the vi products reached the same values with the SRE results for the only 10Ni-SA and 10Ni-P123-SBA-15 catalysts. For the other catalysts, the physical interaction between catalyst and sorbent affects the catalytic activity of the catalyst. The best packing configuration of catalyst and sorbent in the SESRE reaction is three ordered packing concept. Activity test results showed that in-situ removal of CO2 with CaO significantly enhanced hydrogen production by minimizing equilibrium limitations. Results proved the advantages of sorption enhanced process for the production of high purity hydrogen from ethanol. With use of microwave heating system for the 10Ni-SBA-15 catalyst, the coke formation in the spent catalysts for the SRE was decreased from 56% to 3% compared to conventionally heated system.

Suggestions

Novel bimetallic mesoporous catalysts for hydrogen production through steam reforming of ethanol
Şener, Canan; Doğu, Timur; Doğu, Gülşen; Department of Chemical Engineering (2012)
Hydrogen is considered as an alternative clean energy source due to the depletion of fossil fuels and related environmental problems. Steam reforming of bio-ethanol, has excellent potential for hydrogen production, with CO2 neutrality. Ni, Pd and Pt are the most active metals for steam reforming of ethanol. Improving catalytic activity of supported Ni catalyst by incorporating small amount of Pd or Pt is a successful method for increasing activity and stability of the catalyst. Development of active and sta...
Ethanol steam reforming with zirconia based catalysts
Arslan, Arzu; Doğu, Timur; Department of Chemical Engineering (2014)
Production of hydrogen, which has been considered as an environmentally clean ideal energy carrier, from abundant energy resources cleanly and renewably is essential to support sustainable energy development. Hydrogen production from bio-ethanol by steam reforming process is a promising approach, since bio-ethanol is the most available bio-fuel in the world and steam reforming of ethanol yields formation of 6 moles of hydrogen per mole of ethanol. Support material used for nickel based catalysts plays a cru...
Hydrogen production from ethanol over mesoporous alumina based catalysts and microwave reactor applications
Gündüz, Seval; Doğu, Timur; Department of Chemical Engineering (2014)
Due to fast depletion of fossil fuel resources and related environmental impact of CO2 emissions, the interest in hydrogen as a clean energy carrier has recently increased. Hydrogen production from bio-ethanol, which already contains large amount of water, by steam reforming process, has shown excellent potential with CO2 neutrality and renewability. Steam reforming of ethanol (SRE) process has a highly complex reaction network including numerous side reactions which decrease hydrogen yield and have a negat...
Sorption enhanced ethanol reforming over cobalt, nickel incorporated mcm-41 for hydrogen production
Gündüz, Seval; Doğu, Timur; Department of Chemical Engineering (2011)
The interest in hydrogen as a clean energy source has increased due to depletion of limited fossil resources and environmental impact related to CO2 emissions. Hydrogen production from bio-ethanol, which already contains large amount of water, by steam reforming reaction, has shown excellent potential with CO2 neutrality. However, steam reforming of ethanol reaction is a highly complex process including many side reactions which decrease hydrogen yield and have a negative effect on process economy. Also, th...
Improvement in dye sensitized solar cells from past to present
Mohiuddin, Obaidullah; Obaidullah, Madina; Sabah, Cumali (Springer Science and Business Media LLC, 2018-10-01)
Several emerging renewable technologies are available to satisfy the current energy demand and to minimize the effect of environmental degradation caused by high consumption of fossil fuels. These technologies are not mature enough to solve this problem but require more time for improving the efficiency, and cost reduction to become the economical alternative of fossil fuels. In this paper Dye-sensitized solar cell (DSSC) has been discussed in detail owing to advancement in the technology. Since each compon...
Citation Formats
M. Sarıyer, “Sorption enhanced reforming of ethanol over novel catalysts and microwave reactor application,” M.S. - Master of Science, Middle East Technical University, 2018.