Vibration isolation system for space launch vehicles

2018
Karaman, Burak
Show full item record
260
views
0
downloads
In the frame of this thesis, novel vibration isolation systems for spaces launch vehicles are designed and verified by vibration tests in laboratory environment. Payloads, satellites or spacecraft, are exposed high level of vibration loads during launch. These vibration loads are transmitted from launch vehicle to the payload and may have a detrimental effect on the payload. Vibration isolation systems can be used at the payload-launch vehicle interface in order to reduce vibration environment of a payload. In this thesis, Dnepr launch vehicle and Sentinel-2 satellite are chosen as a case study, and system-level technical requirements for vibration isolation system are determined. The vibration isolator properties, which are stiffness, loss factor and number of isolators, are derived to meet system-level technical requirements by performing random response and harmonic response analyses using mathematical model. Then, six different vibration isolator concept are achieved utilizing topology optimization, compliant mechanisms and similar systems. The detailed design of three different vibration isolator alternatives are performed to achieve required stiffness and loss factor values. Stiffness and loss factor of vibration isolators are obtained by finite element analyses. Finally, the designed vibration isolation systems are verified by finite element analyses and vibration tests in laboratory environment.
Vibration (Aeronautics)., Rockets (Aeronautics), Space Launch System (Launch vehicle).
http://etd.lib.metu.edu.tr/upload/12623043/index.pdf
https://hdl.handle.net/11511/27973
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

An Approach for System Identification in Unmanned Surface Vehicles
Erunsal, Izzet Kagan; Ahiska, Kenan; Kumru, Murat; Leblebicioğlu, Mehmet Kemal (2017-10-21)
In this study, a system identification methodology is introduced to determine the model parameters of unmanned surface vehicles. The proposed identification scheme is based on sequencing the experiments according to their capabilities to identify the model parameters. In each experiment, the parameters to be found are updated and the results are validated before ascertaining the final value. A procedure to complete the identification work in an experiment, namely the required post-processing, the optimizati...
Smooth slew maneuvers of flexıble spacecraft
Altınışık, Süleyman; Tekinalp, Ozan; Department of Aerospace Engineering (2019)
In this thesis, the vibration suppression of flexible spacecraft that carries out attitude tracking maneuvers is addressed. Attitude control algorithm that uses quaternion parametrization is employed. The nonlinear tracking controller employs the to-go quaternion and its derivative. Feedback controller designed is based on this recently developed attitude formulation. Piezoelectric sensors and actuators are also included to rapidly suppress structural vibration. The simulation results demonstrate the succes...
A tool for designing robust autopilots for ramjet missiles
Kahvecioğlu, Alper; Alemdaroğlu, Hüseyin Nafiz; Department of Aerospace Engineering (2006)
The study presented in this thesis comprises the development of the longitudinal autopilot algorithm for a ramjet powered air-to-surface missile. Ramjet Missiles have short time-of-flight, however they suffer from limited angle of attack margins due to poor operational-region characteristics of the ramjet engine. Because of such limitations and presence of uncertainties involved, Robust Control Techniques are used for the controller design. Robust Control Techniques not only provide an easy limitation/uncer...
Vibration isolation of inertial measurement unit
Çınarel, Dilara; Ciğeroğlu, Ender; Department of Mechanical Engineering (2012)
Sensitive devices are affected by extreme vibration excitations during operation so require isolation from high levels of vibration excitations. When these excitation characteristics of the devices are well known, the vibration isolation can be achieved accurately. However, it is possible to have expected profile information of the excitations with respect to frequency. Therefore, it is practical and useful to implement this information in the design process for vibration isolation. In this thesis, passive ...
VERIFICATION OF A FINITE ELEMENT MODEL OF AN UNMANNED AERIAL VEHICLE WING TORQUE BOX VIA EXPERIMENTAL MODAL TESTING
Unlusoy, Levent; Şahin, Melin; Yaman, Yavuz (2012-07-04)
In this study, the detailed finite element model (FEM) of an unmanned aerial vehicle wing torque box was verified by the experimental modal testing. During the computational studies the free-free boundary conditions were used and the natural frequencies and mode-shapes of the structure were obtained by using the MSC Software. The results were then compared with the experimentally obtained resonance frequencies and mode-shapes. It was observed that the frequencies were in close agreement having an error with...
Citation Formats
B. Karaman, “Vibration isolation system for space launch vehicles,” M.S. - Master of Science, Middle East Technical University, 2018.
METU IIS - Integrated Information Service open@metu.edu.tr