A comparative experimental and density functional study of glucose adsorption and electrooxidation on the Au-graphene and Pt-graphene electrodes

2020-01-01
Caglar, Aykut
Duzenli, Derya
Önal, Işık
Tersevin, Ilker
Sahin, Ozlem
Demir Kıvrak, Hilal
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
147
views
0
downloads
At present, the graphene is covered on Cu foil with the 5 sccm hexane (C6H14) flow rate, 50 sccm hydrogen (H-2) flow rate, and 20 min deposition time parameters by the CVD method. The graphene on the Cu foil is then covered onto few-layer ITO electrode. Furthermore, the Pt and Au metals are electrodeposited on graphene/ITO electrode with electrochemical method. These electrodes are characterized by Raman spectroscopy and Scanning Electron Microscopy-Energy Dispersive X-Ray analysis (SEM-EDX). The graphene structure is approved via Raman analysis. Au, Pt, and graphene network are openly visible from SEM results. In addition, glucose (C6H12O6) electrooxidation is investigated with cyclic voltammetry (CV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS) measurements. As a result, Pt-graphene/ITO indicates the best C6H12O6 electrooxidation activity with 9.21 mA cm(-2) specific activity (highly above the values reported in the literature). In all electrochemical measurements, Pt-graphene/ITO exhibits best electrocatalytic activity, stability, and resistance compared to the other electrodes. The adsorption of the C6H12O6 molecule is examined theoretically over metal atom (gold and platinum)-doped graphene surfaces using the density functional theory (DFT) method. The interaction between C6H12O6 molecule and OH adsorbed Pt-doped surface is stronger than that of OH adsorbed Au-doped graphene surface thermodynamically according to the reaction energy values. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Au, Pt, Graphene, Chemical vapour deposition, Glucose electrooxidation, Density functional theory
https://hdl.handle.net/11511/30273
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
Graduate School of Natural and Applied Sciences, Article

Suggestions

A quantum chemical study of nitric oxide reduction by ammonia (SCR reaction) on V2O5 catalyst surface
Soyer, Sezen; Uzun, Alper; Senkan, Selim; Önal, Işık (2006-12-15)
The reaction mechanism for the selective catalytic reduction (SCR) of nitric oxide by ammonia on (010) V2O5 surface represented by a V2O9H8 cluster was simulated by means of density functional theory (DFT) calculations performed at B3LYP/6-31G** level. The computations indicated that SCR reaction consisted of three main parts. For the first part, ammonia activation on V2O5 was investigated. Ammonia was adsorbed on Bronsted acidic V-OH site as NH4+ species by a non-activated process with an exothermic relati...
A numerical study of solidification and viscous dissipation effects on polymer melt flow in plane channels
Tutar, Mustafa; Karakuş, Ali (Walter de Gruyter GmbH, 2013-04-01)
The combined effects of solidification and viscous dissipation on the hydrodynamic and thermal behavior of polymer melt flow during the injection process in a straight plane channel of constant cross section are numerically studied by considering the shear-rate and temperature-dependent viscosity and transient-phase change behavior. A numerical finite volume method, in conjunction with a modified form of the Cross constitutive equation to account for shear rate, temperature-dependent viscosity changes and a...
A density functional theory study of partial oxidation of propylene on Cu2O(001) and CuO(001) surfaces
Duzenli, Derya; Atmaca, Deniz Onay; Gezer, Miray Gulbiter; Önal, Işık (2015-11-15)
This work theoretically investigates propylene epoxidation reaction on Cu2O(001) and CuO(001) surfaces using periodical DFT method to determine the active copper species within the reaction mechanism. The transition states and energy profiles are calculated for the formation of surface intermediates such as oxametallopropylene (OMP) over Cu2O(0 0 1) and oxygen bridging (OB) over CuO(0 0 1) and allylic H-stripping reaction (AHS) over both surfaces as well as for formation of products. Propylene oxide (PO) an...
A DFT study on CO oxidation on Pd-4 and Rh-4 clusters and adsorbed Pd and Rh atoms on CeO2 and Ce(0.75)Z(r0.25)O(2) supports for TWC applications
Gerceker, Duygu; Önal, Işık (2013-11-15)
CO oxidation reaction mechanisms and energetics are examined on adsorbed Pd-4 and Rh-4 clusters and adsorbed Pd and Rh atoms on CeO2 and Ce0.75Zr0.25 O-2 support structures using DFT methods. Activation barriers and TS structures are computed with CI-NEB method. On cluster adsorbed systems, Zr affects CO binding position and O-2 adsorption mode. Energetically, formation of two CO2 molecules without barrier and surface regeneration is possible only on Pd-4-CeO2 surface. With metal atom substituted surfaces, ...
A comparative study of the electronic properties of aluminum nitride compounds
Mohammad, Rezek; Katırcıoğlu, Şenay (2016-01-01)
Electronic properties of aluminum nitride in wurtzite, zinc-blende, and rock-salt phases are investigated by a full potential-linearized augmented plane waves method based on density functional theory within standard local density approximation and its four improved versions. Local density approximation corrected by the generalized gradient functional of Perdew-Wang-Engel-Vosko is found to be more successful than the other generalized gradient functional approximations considered in this work for providing ...
Citation Formats
A. Caglar, D. Duzenli, I. Önal, I. Tersevin, O. Sahin, and H. Demir Kıvrak, “A comparative experimental and density functional study of glucose adsorption and electrooxidation on the Au-graphene and Pt-graphene electrodes,” INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, pp. 490–500, 2020, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/30273.
METU IIS - Integrated Information Service open@metu.edu.tr