Preparation and characterization of zeolite beta-polyurethane composite membranes

Date

2007-06-05

Author

Aksoy, Eda Ayse
Akata, Burcu
Bac, Nurcan
Hasırcı, Nesrin

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

160
views

0
downloads

Incorporation of zeolite into polyurethane (PU) membranes was investigated by using as-synthesized and calcined zeolite beta particles at two different loading contents (0.1 and 1 wt %). The chemical interaction between the zeolite beta crystals and PU was observed by ATR-FTIR spectroscopy. The SEM results suggested that the calcined zeolite beta crystals were more homogeneously dispersed in the composite membranes than the assynthesized zeolite beta crystals. DMA results demonstrated that all composite membranes had higher storage modulus in the rubbery state and higher stability towards thermal and mechanical degradation with respect to the control groups. Tensile testing results also showed increased tensile strength and elongation at break for all composite membranes. This study suggests that incorporating zeolite beta in its as-synthesized or calcined forms and at different amounts can be applied as an alternative method for tailoring the mechanical properties of PU membranes without changing its structural characteristics. (c) 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3378-3387, 2007.

Subject Keywords

Zeolite beta, Polyurethanes, Composites, Mechanical properties

URI

https://hdl.handle.net/11511/30800

Journal

JOURNAL OF APPLIED POLYMER SCIENCE

DOI

https://doi.org/10.1002/app.25976

Collections

Graduate School of Natural and Applied Sciences, Article

Suggestions

OpenMETU
Core

Synthesis of CuO nanostructures on zeolite-Y and investigation of their CO2 adsorption properties Boruban, Cansu; Nalbant Esentürk, Emren (2017-10-01) Copper(II) oxide (CuO) nanoparticles (NPs) in two different morphologies, spiky and spherical, were synthesized on zeolite-Y by a modified impregnation method, and their CO2 adsorbing capabilities were investigated under standard conditions (1 atm and 298 K). The properties and CO2 adsorption performances of the hybrid systems were characterized by transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray, X-ray diffraction, X-ray photoelectron spectroscopy, atomic absorption s...
Investigation of characteristics of urea and butyrylcholine chloride biosensors based on ion-selective field-effect transistors modified by the incorporation of heat-treated zeolite Beta crystals Soy, Esin; Arkhypova, Valentyna; Soldatkin, Oleksandr; Shelyakina, Margarita; Dzyadevych, Sergei; Warzywoda, Juliusz; Sacco, Albert; Akata Kurç, Burcu (2012-10-01) Urea and butyrylcholine chloride (BuChCl) biosensors were prepared by adsorption of urease and butyrylcholinesterase (BuChE) on heat-treated zeolite Beta crystals, which were incorporated into membranes deposited on ion-selective field-effect transistor (ISFET) surfaces. The responses, stabilities, and use for inhibition analysis of these biosensors were investigated. Different heat treatment procedures changed the amount of Bronsted acid sites without affecting the size, morphology, overall Si/Al ratio, ex...
Preparation and Characterization of Antibacterial Zeolite-Polyurethane Composites Kamisoglu, K.; Çatman Aksoy, Emine; Akata Kurç, Burcu; Hasırcı, Nesrin; BAÇ, NURCAN (2008-12-05) In this study, antibacterial properties were induced in polyurethane (PU) films by the incorporation of Ag+-loaded zeolites as fillers. The mechanical and thermal properties of the prepared composites were also investigated. For this purpose, two different types of zeolite microparticles, high-silica zeolite beta crystals and low-silica zeolite A crystals, were synthesized. Ag+ was added by ion exchange, and these particles were incorporated into the PU prepolymer, which was prepared from its main component...
Development of a novel PANI@WO3 hybrid composite and its application as a promising adsorbent for Cr(VI) ions removal Hsini, Abdelghani; Naciri, Yassine; Laabd, Mohamed; Bouzıanı, Asmae; Navío, J.A.; Puga, F.; Boukherroub, Rabah; Lakhmiri, Rajae; Albourine, Abdallah (2021-10-01) In the current study, an in-situ oxidative polymerization method was used to synthesize polyaniline-coated tungsten trioxide biphasic composite (PANI@WO3). The as-developed composite material properties were elucidated using different characterization tools such as X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), N2 sorption-desorption isotherm, and X-ray photoelect...
Preparation of BaxSr1-xTiO3 thin films by chemical solution deposition and their electrical characterization Adem, Umut; Özenbaş, Ahmet Macit; Department of Metallurgical and Materials Engineering (2003) In this study, barium strontium titanate (BST) thin films with different compositions (Ba0.9Sr0.1TiO3, Ba0.8Sr0.2TiO3, Ba0.7Sr0.3TiO3, Ba0.5Sr0.5TiO3) were produced by chemical solution deposition technique. BST solutions were prepared by dissolving barium acetate, strontium acetate and titanium isopropoxide in acetic acid and adding ethylene glycol as a chelating agent and stabilizer to this solution, at molar ratio of acetic acid/ethylene glycol, 3:1. The solution was then coated on Si and Pt//Ti/SiO2/Si ...

Citation Formats

E. A. Aksoy, B. Akata, N. Bac, and N. Hasırcı, “Preparation and characterization of zeolite beta-polyurethane composite membranes,” JOURNAL OF APPLIED POLYMER SCIENCE, pp. 3378–3387, 2007, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/30800.