Characterization of polymer/nanoclay composites via direct pyrolysis mass spectrometry

2018-09-01
Ozdemir, Esra
Hacaloğlu, Jale
In this work, direct probe mass spectrometry, DP-MS, method was applied to investigate the characteristics of polymer/organoclay composites. For this purpose organically modified montmorillonites involving four different alkyl quaternary ammonium salts were incorporated into polylactide, poly(methyl methacrylate) and polyethylene matrices. The morphology of the composites were first analyzed by x-ray diffraction, XRD, and transmission electron microscopy, TEM, measurements. The temperature regions at which the organic modifier was lost during the pyrolysis of the organoclays and the polymer/organoclay composites were correlated with inter-layer spacing of the clay layers. It has been determined that the loss of organic modifier shifted to lower temperatures as the interlayer-spacing increased. As a consequence of broader inter-layer spacing, the extent of intercalation was improved leading to an increase in thermal stability of the matrix polymer. The results clearly showed that the DP-MS technique supplies strong evidences for the extent and type of dispersion of clay layers in the polymer matrices. In addition the technique allows identification of possible interactions between the polymer and the organic modifier.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Suggestions

Characterization of polyaniline via pyrolysis mass spectrometry
Hacaloğlu, Jale; Kücükyavuz, Zühal (2008-04-05)
In this work, direct insertion probe pyrolysis mass spectrometry technique was applied to investigate the thermal and the structural characteristics of electrochemically prepared HCl and HNO3-doped polyaniline (PANI) films. It has been determined that the thermal degradation of both samples showed three main thermal degradation stages. The first stage around 50-60 degrees C was associated with evolution of solvent and low-molecular-weight species adsorbed on the polymer, the second stage just above 150 degr...
Characterization of electrochemically synthesized p-toluene sulfonic acid doped polypyrrole by direct insertion probe pyrolysis mass spectrometry
Uyar, Tamer; Toppare, Levent Kamil; Hacaloğlu, Jale (2002-01-01)
A direct insertion probe pyrolysis mass spectrometry technique was used to perform a systematic thermal characterization of conducting polypyrrole doped with p-toluene sulfonic acid. The effect of dopant concentration on thermal stability and degradation products was investigated using undoped and dedoped polypyrrole samples. The data indicate that polymerization of pyrrole in the absence of dopant produces an aromatic structure, which transforms into the quinoid form at high dopant concentrations. Reductio...
Investigation of the effect of dopant on characteristics of poly(3-methyl thiophene) via pyrolysis mass spectrometry
Gözet, Tuba; Önal, Ahmet Muhtar; Hacaloğlu, Jale (2007-03-01)
In this work, a direct insertion probe pyrolysis mass spectrometry technique was applied to investigate the thermal and the structural characteristics of electrochemically prepared PF6- and BF4- doped poly(3-methylthiophene) (PMTh) to explore the effect of dopant on thermal and structural characteristics. It has been determined that the thermal degradation of PMTh occurs in two steps as in the case of polythiophene, (PTh). The first step was assigned to the loss of the dopant, and the second step to the deg...
Investigation of polymerization of benzoxazines and thermal degradation characteristics of polybenzoxazines via direct pyrolysis mass spectrometry
Fam, Shahla Bagheri; Uyar, Tamer; Ishida, Hatsuo; Hacaloğlu, Jale (2012-10-01)
Polymerization of benzoxazines and thermal degradation mechanisms of polybenzoxazines were investigated using the direct pyrolysis mass spectrometry (DP-MS) technique. The benzoxazine structures were based on phenol and aniline and on bisphenol-A and methylamine or aniline. Polymerizations of the benzoxazines were carried out by curing them at elevated temperatures without addition of initiator or catalyst. DP-MS data showed the presence of chains generated by opposing polymerization reaction pathways indic...
Poly(methyl methacrylate) organoclay composites; interactions of organic modifier with the polymer effecting thermal degradation behavior
Ozdemir, Esra; Hacaloğlu, Jale (2017-10-01)
In this work, poly(methyl methacrylate), PMMA, and its composites involving montmorillonites modified with different quaternary ammonium salts were prepared and characterized by X-ray Diffraction, XRD, Transmission Electron Microscopy, TEM, Thermogravimetry, TGA and direct pyrolysis mass spectrometry, DPMS. Increase in the interlayer spacing of the silicate layers compared to the corresponding organically modified clay was detected in X-ray diffractograms for all the PMMA composites in accordance with TEM r...
Citation Formats
E. Ozdemir and J. Hacaloğlu, “Characterization of polymer/nanoclay composites via direct pyrolysis mass spectrometry,” JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, pp. 395–404, 2018, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/32247.