Cytotoxicity of 5-fluorouracil entrapped in gelatin microspheres

2004-05-01
Muvaffak, A
Gurhan, I
Hasırcı, Nesrin
Gelatin microspheres were prepared by water/oil emulsion polymerization and by cross-linking with glutaraldehyde. For the microsphere preparation procedure, two different gelatin (5 or 10% w/v) and three different glutaraldehyde (5, 0.5 or 0.1% v/v) concentrations were used. The influence of preparation compositions on microsphere recovery, particle size and morphology, swelling and degradation, 5-fluorouracil loading and release, and cytotoxicity were investigated. The concentrations of gelatin and glutaraldehyde influenced the size and surface properties of microspheres. The decrease in gelatin concentration and the increase in glutaraldehyde concentration resulted in the formation of smaller (140.82-71.47 mum for gelatin microspheres with a 5% gelatin content; 297.67-97.44 mum for gelatin microspheres with a 10% gelatin content) microspheres with smoother surface properties. Swelling values were decreased as the amount of glutaraldehyde was increased. In particular, for microspheres with a high glutaraldehyde content (5% v/v), only about 15% were degraded in 12 days, whereas for those with 0.5% (v/v) glutaraldehyde, almost 97% degradation occurred in the same period. The most rapid 5-fluorouracil release was observed from uncross-linked microspheres (about 88% in 4 h), whereas a particular slower release (about 36% in 4 h) profile was obtained for the highly cross-linked ones. Cytotoxicity tests of free and entrapped 5-fluorouracil were carried out with MCF-7 breast cancer cell line. Free 5-fluorouracil produced an immediate effect, whereas entrapped 5-fluorouracil showed a prolonged cytotoxic effect.
JOURNAL OF MICROENCAPSULATION

Suggestions

Gelatin microspheres and sponges for delivery of macromolecules
Ulubayram, K; Eroglu, I; Hasırcı, Nesrin (2002-01-01)
Gelatin microspheres and gelatin sponges were prepared by coacervation and freeze drying techniques, respectively. Both systems were crosslinked with glutaraldehyde. The mean diameter of the microspheres were in the range of 40-80 mum and the mean pore size of the sponges was 130-220 mum depending on the preparation conditions. Bovine serum albumin (BSA) was added into the preparation solutions and entrapped in the microspheres and sponges. BSA addition to sponges was also achieved by addition of BSA-contai...
Poly(epsilon-caprolactone) composites containing gentamicin-loaded beta-tricalcium phosphate/gelatin microspheres as bone tissue supports
Sezer, Umran Aydemir; Aksoy, Eda Ayse; Hasırcı, Vasıf Nejat; Hasırcı, Nesrin (2013-02-05)
In this work, novel antibacterial composites were prepared by using poly(epsilon-caprolactone) (PCL) as the main matrix material, and gentamicin-loaded microspheres composed of beta-tricalcium phosphate (beta-TCP) and gelatin. The purpose is to use this biodegradable material as a support for bone tissue. This composite system is expected to enhance bone regeneration by the presence of beta-TCP and prevent a possible infection that might occur around the defected bone region by the release of gentamicin. Th...
Effects of aromatic diboronic acid on thermal charateristics of polybenzoxazines based on phenol and aniline
Telli, Aysegul Hisar; Hacaloğlu, Jale (2018-11-01)
In this work, polybenzoxazines based on phenol and aniline were prepared by curing as-synthesized and purified monomers in the presence of aromatic diboronic acid, BDBA. Condensation reactions between BOH groups of diboronic acid and phenolic OH groups of benzoxazine took place during curing only when unreacted phenol, or low mass oligomers were present in the medium. Generation of fragments involving B-O-C groups and significant improvement in thermal characteristics were detected upon curing the as-synthe...
Controlled release of aldicarb from lignin loaded ionotropic hydrogel microspheres
Kok, FN; Wilkins, RM; Cain, RB; Arica, MY; Alaeddinoglu, G; Hasırcı, Vasıf Nejat (1999-09-01)
Aldicarb loaded microspheres of carboxymethyl cellulose, CMC, of various compositions were prepared with the crosslinking action of AI(III). Into these microspheres, lignin was introduced as a filler to further regulate the rate of release. The encapsulation efficiency was low (4.15-13.00%) due to the high water solubility of aldicarb. Release into aqueous media was quite rapid and almost complete within 24h. Initial stages of the release (60% of AS released) was investigated to determine the release mechan...
Polystyrene-organoclay nanocomposites prepared by melt intercalation, in situ, and Masterbatch methods
Yılmazer, Ülkü; Ozden, G (Wiley, 2006-06-01)
In this study, polystyrene (PS)/montmorillonite nanocomposites were prepared by melt intercalation, in situ polymerization, and masterbatch methods. In the masterbatch method, as the first step, a high clay content composite of PS-organoclay (masterbatch) was prepared by in situ polymerization, and then the prepared masterbatch was diluted to desired compositions with commercial PS in a twin-screw extruder. The structure and mechanical properties of the nanocomposites were examined. X-ray diffraction (XRD) ...
Citation Formats
A. Muvaffak, I. Gurhan, and N. Hasırcı, “Cytotoxicity of 5-fluorouracil entrapped in gelatin microspheres,” JOURNAL OF MICROENCAPSULATION, pp. 293–306, 2004, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/32326.