Product Based Material Testing for Hyperelastic Suspension Jounce Bumper Design with FEA

Date

2010-09-10

Author

Caliskan, Kemal
Konukseven, Erhan İlhan
Ünlüsoy, Yavuz Samim

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

150
views

0
downloads

The basic problem in the finite element analysis of parts made of hyperelastic materials is the identification of mathematical material model coefficients. Furthermore, selection of a suitable mathematical hyperelastic material model may not be straightforward. In this study, a systematic design methodology is presented for hyperelastic suspension jounce bumpers. The presented methodology involves a critical examination of material testing procedures, material model selection, and coefficient identification. The identified material model coefficients are verified through comparison of the finite element analysis results with actual tests.

Subject Keywords

Material Testing, FEA, Material Model Identification, Hyperelastic Jounce Bumper

URI

https://hdl.handle.net/11511/32420

DOI

https://doi.org/10.4028/www.scientific.net/kem.450.119

Collections

Graduate School of Natural and Applied Sciences, Conference / Seminar

Suggestions

OpenMETU
Core

Product-oriented material testing and FEA for hyperelastic suspension jounce bumper design Caliskan, Kemal; Konukseven, Erhan İlhan; Unlusoy, Y Samim (2010-01-01) The basic problem in the finite element analysis of parts made of hyperelastic materials is the identification of mathematical material model coefficients. Furthermore, selection of a suitable mathematical hyperelastic material model may not be straightforward. In this study, a design methodology is presented for hyperelastic suspension jounce bumpers. The commonly used traditional trial-and-error method for jounce bumper design results in high mould costs for prototype production and prolongs the time requ...
Hybrid finite element for analysis of functionally graded beams Sarıtaş, Afşin; Soydas, Ozan (2017-01-01) A hybrid finite element model is presented, where stiffness and mass distributions over a beam with functionally graded material (FGM) are accurately modeled for both elastic and inelastic material responses. Von Mises and Drucker-Prager plasticity models are implemented for metallic and ceramic parts of FGM, respectively. Three-dimensional stress-strain relations are solved by a general closest point projection algorithm, and then condensed to the dimensions of the beam element. Numerical examples and veri...
Theoretical prediction of bulk glass forming ability (BGFA) of Ti-Cu based multicomponent alloys SUER, Sila; Mehrabov, Amdulla; Akdeniz, Mahmut Vedat (Elsevier BV, 2009-03-01) The bulk glass forming ability (BGFA) of Ti-Cu based multicomponent alloys has been evaluated via theoretical modeling and computer simulation studies based on a combination of electronic theory of alloys in the pseudopotential approximation and the statistical thermodynamical theory of liquid alloys The. magnitude of atomic ordering energies, calculated by means of the electronic theory of alloys in the pseudopotential approximation, was subsequently used for calculation of the key thermodynamic parameters...
Analytical Solutions To Elastic Functionally Graded Cylindrical And Spherical Pressure Vessels Eraslan, Ahmet Nedim (2015-10-01) Analytical solutions to earlier models by Chen and Lin [1] concerning elastic analysis of functionally graded cylindrical and spherical pressure vessels are obtained and presented.
Transformation Electromagnetics Based Analysis of Waveguides With Random Rough or Periodic Grooved Surfaces Ozgun, Ozlem; Kuzuoğlu, Mustafa (Institute of Electrical and Electronics Engineers (IEEE), 2013-02-01) A computational model is introduced which employs transformation-based media to increase the computational performance of finite methods (such as finite element or finite difference methods) for analyzing waveguides with grooves or rough surfaces. Random behavior of the roughness is taken into account by utilizing the Monte Carlo technique, which is based on a set of random rough surfaces generated from Gaussian distribution. The main objective of the proposed approach is to create a single mesh, and to ana...

Citation Formats

K. Caliskan, E. İ. Konukseven, and Y. S. Ünlüsoy, “Product Based Material Testing for Hyperelastic Suspension Jounce Bumper Design with FEA,” 2010, vol. 450, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/32420.