Towards more reliable and cost effective superconducting generators for wind turbines

Date

2014-01-01

Author

Keysan, Ozan
Burchell, J.
Mueller, M.A.

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

166
views

0
downloads

For large(~10 MW) wind turbines, direct-drive superconducting generators are proposed to reduce the tower head mass, which help to reduce the installation costs. Most of the existing designs has a very similar topology: a synchronous machine with a rotating superconducting field winding. However, this topology may not be the most suitable design for harsh offshore conditions. A novel transverse flux design is presented in this paper. The design has stationary and modular superconducting field windings combined with a double armature structure is presented in this paper.

Subject Keywords

Superconducting machines, Offshore wind turbines, Direct drive, Claw pole

URI

https://hdl.handle.net/11511/32805

DOI

https://doi.org/10.1049/cp.2014.0518

Collections

Department of Electrical and Electronics Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

A Transverse Flux High Temperature Superconducting Generator Topology for Large Direct Drive Wind Turbines Keysan, Ozan (2012-01-01) The cost and mass of an offshore wind turbine power-train can be reduced by using high-temperature superconducting generators, but for a successful commercial design the superconducting generator should be as reliable as its alternatives. In this paper, we present a novel transverse flux superconducting generator topology which is suitable for low-speed, high-torque applications. The generator is designed with a stationary superconducting field winding and a variable reluctance claw pole motor for simplifie...
Future Electrical Generator Technologies for Offshore Wind Turbines Keysan, Ozan (2015-01-01) In this article, different electric generator topologies for offshore wind turbines will be reviewed. Although, the most common generator type used in the onshore wind turbines is the doubly-fed induction generator, different generator designs are proposed for large offshore wind turbines, which operate in harsher conditions and are difficult to maintain. Some of these designs are direct-drive permanent magnet generators, hydraulic power take-off systems and superconducting generators.
Modeling and investigation of fault ride through capability of variable speed wind turbines Koç, Erkan; Güven, Ali Nezih; Department of Electrical and Electronics Engineering (2010) Technological improvements on wind energy systems with governmental supports have increased the penetration level of wind power into the grid in recent years. The high level of penetration forces the wind turbines stay connected to the grid during the disturbances in order to enhance system stability. Moreover, power system operators must revise their grid codes in parallel with these developments. This work is devoted to the modeling of variable speed wind turbines and the investigation of fault ride troug...
Hybrid excited synchronous generator design and comparison of direct drive wind turbines Akgemci, Aysel; Keysan, Ozan; Department of Electrical and Electronics Engineering (2019) Various types of electrical generators are used in wind turbines and there is not an agreement on the best generator type. Although, high speed Doubly Fed Induction Generators (DFIGs) are still the most common generator topology utilized in wind turbine systems, there is a trends toward direct-drive Permanent Magnet Synchronous Generators (PMSGs), as they are more efficient and reliable. However, permanent magnets (PMs) induce uncontrollable voltage due to the fixed flux resulting from PM excitation. Conven...
Experimental Study of a TLP Offshore Floating Wind Turbine Oğuz, Elif; Clelland, David; İncecik, Atilla; Dai, Saishuai; López, Juan Amate; Sánchez, Gustavo (null; 2016-07-18) Tank testing in a wind and wave environment is a key part of the design process for the development of an offshore floating wind turbine. The current paper describes an extensive experiment campaign carried out at the Kelvin Hydrodynamics Laboratory at the University of Strathclyde to determine the hydrodynamic performance of the Iberdrola TLPWIND offshore floating wind turbine with the NREL 5MW reference turbine over a range of environmental conditions. Tests were carried out for 70m water depth and the de...

Citation Formats

O. Keysan, J. Burchell, and M. A. Mueller, “Towards more reliable and cost effective superconducting generators for wind turbines,” 2014, vol. 2014, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/32805.