Synthesis and characterization of conducting copolymers of poly(vinyl alcohol) with thiophene side-groups and pyrrole

Date

2004-12-01

Author

Sahmetlioglu, E
Yuruk, H
Toppare, Levent Kamil
Cianga, I
Yagci, Y

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

182
views

0
downloads

Graft copolymers of poly(vinyl alcohol) with thiophene side-groups and pyrrole were synthesized by electrochemical polymerization methods. Poly(vinyl alcohol) with thiophene side-groups (PVATh) was obtained from the reaction between poly(vinyl alcohol) (PVA) and thiophene-3-acetic acid. The syntheses of copolymers Of PVATh and pyrrole were achieved electrochemically by using three different supporting electrolytes, p-toluene sulfonic acid (PTSA), sodium dodecyl sulfate (SDS) and tetrabutylammonium tetrafluoroborate (TBAFB). Characterization of PVATh and graft copolymers was performed by a combination of techniques including cyclic voltammetry, scanning electron microscopy, thermal gravimetry, differential scanning calorimetry, size-exclusion chromatography, H-1 NMR and FT-IR. The conductivities were measured by the four-probe technique. (C) 2004 Society of Chemical Industry.

Subject Keywords

Polypyrrole, Poly(vinyl alcohol), Conducting copolymers

URI

https://hdl.handle.net/11511/33330

Journal

POLYMER INTERNATIONAL

DOI

https://doi.org/10.1002/pi.1644

Collections

Department of Chemistry, Article

Suggestions

OpenMETU
Core

Synthesis and characterization of a new copolymer of PTSA doped polypyrrole Levent, A.; Hacaloğlu, Jale; Toppare, Levent Kamil; Yagci, Y. (2003-04-04) In this work poly(2-methylbutyl 2-(3-thienyl)acetate was prepared by galvanostatic polymerization of (S)-2-methylbutyl 2-(3-thienyl) acetate. Polypyrrole was electrochemically polymerized on a poly(2-methylbutyl 2-(3-thienyl)-acetate) coated anode through the thiophene moities of the matrix polymer. Direct insertion probe pyrolysis MS and Curie point pyrolysis GCMS techniques were utilized for structural and thermal characterizations.
Synthesis and characterization of a bifunctional amido-thiophene monomer and its copolymer with thiophene and electrochemical properties AK, M; Çırpan, Ali; Yılmaz, Fatih; YAGCI, Y; Toppare, Levent Kamil (2005-05-01) A bifunctional amido-thiophene namely hexamethylene (bis-3-thiophene acetamide) (HMTA) was synthesized by the reaction of 3-thiophene acetic acid with hexamethylene diamine. Copolymerization in the presence of thiophene was achieved electrochemically in tetrabutylammonium tetrafluoroborate/acetonitrile (TBAFB/AN). Spectroelectro-chemical analysis of the resulting copolymer [P(HMTA-co-Th)] reflected electronic transitions at 505 nm, 740 nm and similar to 1000 nm, revealing pi to pi* transition, polaron and b...
Synthesis of n-(2-propylphenyl) substituted chiral amino alcohols and their usage in enantioselective diethylzinc addition reactions Günler, Zeynep İnci; Tanyeli, Cihangir; Department of Chemistry (2011) IChiral 1,2-amino alcohols were synthesized via newly developed “intramolecular unsaturation transfer” using cyclohexanone, propargyl bromide, and various chiral amino alcohols as starting components. These amino alcohols can be potential chiral ligands for many asymmetric transformation reactions. Therefore, their effectiveness as chiral ligands in diethylzinc addition to benzaldehyde and N-diphenylphosphinoyl imines were tested. Various parameters including temperature, solvent, ligand amount etc. were sc...
Synthesis and characterization of conducting copolymers of thiophene functionalized monomers and polymers Papila, Özge; Toppare, Levent Kamil; Department of Chemistry (2003) Synthesis and characterization of conducting copolymers were achieved by using thiophene end-funtionalized TEMPO initiated polystyrene (PS), decanoic acid dithiophen-3yl-me1hyl ester (DTME) and octanoic acid thiophen-3yl-methyl ester (OTME). Redox behavior of polymer and monomers were done by Cyclic Voltammetry (CV). Structural and characterization of samples were carried out by XB., 13C Nuclear Magnetic Resonance (NMR) and Fourier Transform Infrared Spectroscopy (FTIR). Thermal analyses of resultant conduc...
Synthesis and Characterization of Conducting Copolymers of Bisphenol A-Diglycidyl Ether with Thiophene Side-Groups and Pyrrole Sahmetlioglu, Ertugrul; Varol, Ramazan; Toppare, Levent Kamil; Yuruk, Huseyin (Informa UK Limited, 2009-01-01) Copolymers of bisphenol A-diglycidyl ether with thiophene side-groups and pyrrole were synthesized by electrochemical polymerization. Bisphenol A-diglycidyl ether with thiophene side-groups (DGEBATh) was obtained from the reaction between bisphenol A-diglycidyl ether (DGEBA) and thiophene-3-acetic acid. The syntheses of copolymers of DGEBATh and pyrrole were achieved electrochemically using three different supporting electrolytes, p-toluene sulfonic acid (PTSA), sodium dodecyl sulfate (SDS) and tetrabutylam...

Citation Formats

E. Sahmetlioglu, H. Yuruk, L. K. Toppare, I. Cianga, and Y. Yagci, “Synthesis and characterization of conducting copolymers of poly(vinyl alcohol) with thiophene side-groups and pyrrole,” POLYMER INTERNATIONAL, pp. 2138–2144, 2004, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/33330.