Fabrication of silicon solar cells.

Date

1972

Author

Çakıroğlu, Okay

Metadata

Show full item record

Item Usage Stats

63
views

0
downloads

URI

https://hdl.handle.net/11511/3342

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Fabrication of Conductive Electroactive Materials for Next-Generation Suspension Flow Batteries Aşkar, Yasemin; Yıldız, Bayram; Maviş, Bora; Çınar, Simge (2019-12-01)
Fabrication and characterization of single crystalline silicon solar cells Es, Fırat; Turan, Raşit; Department of Physics (2010) The electricity generation using photovoltaic (PV) solar cells is the most viable and promising alternative to the fossil-fuel based technologies which are threatening world’s climate. PV cells directly convert solar energy into electrical power through an absorption process that takes place in a solid state device which is commonly fabricated using semiconductors. These devices can be employed for many years with almost no degradation and maintenance. PV technologies have been diversified in different dire...
Fabrication of silicon carbide-on-silcon based devices for effective near-field thermal radiation transfer Elçioğlu, Elif Begüm; Okutucu Özyurt, Hanife Tuba; Mengüç, M. Pınar; Department of Mechanical Engineering (2018) Near-field radiative transfer (NFRT) has attracted attention due to the potential of obtaining improved amount of heat transfer between media separated by distances comparable to or smaller than the dominant wavelength of emission. Such potential has been demonstrated in vacuum environments to form the basis of mainly near-field thermophotovoltaic systems and further, conversion into electricity with high system efficiency. In this thesis, an analytical analysis is performed to gain insight on nearfield rad...
Fabrication and investigation of extremely thin CdTe absorber layer solar cells Hosseını, Arezoo; Güllü, Hasan Hüseyin; Bayraklı, Özge; Parlak, Mehmet; Turan, Raşit; Erçelebi, Ayşe Çiğdem (null; 2016-10-02)
Fabrication and investigation of extremely thin CdTe absorber layer solar cells Hosseini, Arezoo; Erçelebi, Ayşe Çiğdem; Turan, Raşit; Department of Physics (2016) Extremely thin absorber layer (ETA) solar cells aim to combine the advantages of using very thin and cheaply produced absorber layer on nano structured substrates with stability of all-solid-state solar cells. This type of photovoltaic devices use a nano structured interpenetrating heterojunction of thin light-absorbing layer at the interface between an n- and p-type semiconductors. N-type nano structured TiO2 layer is deposited on a Transparent Conducting Oxide coated glass (TCO) substrate, following with ...

Citation Formats

O. Çakıroğlu, “Fabrication of silicon solar cells.,” Middle East Technical University, 1972.