Fuzzy approach for preliminary design of weak rock slopes in lignite mines

Date

2018-02-01

Author

Yardımcı, Ahmet Güneş
Karpuz, Celal

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

168
views

0
downloads

Rock slope failure modes are either driven by structurally controlled mechanisms (planar, wedge, or toppling failure) or lean upon the highly jointed or weak rock mass (circular failure). Developing practical tools for preliminary slope design is a popular topic among geotechnical society. This study proposes a practical methodology to predict a safe overall slope angle for weak rock slopes of lignite mines. Rock mass rating (RMR) and slope mass rating (SMR) classification systems can be remarkably misleading for weak rocks. Fuzzy modification was proven to improve rock and slope quality predictions. In addition, structurally controlled failures can be estimated more precisely. Later, a popular slope performance chart of Bieniawski that is based on RMR was modified by the fuzzy approach, and the computer models of a weak rock mass failure in a Turkish lignite mine are presented. The modified methodology was proven to be better suited to the weak rock conditions.

Subject Keywords

Geotechnical Engineering and Engineering Geology, General Engineering, General Earth and Planetary Sciences, Ocean Engineering, General Environmental Science

URI

https://hdl.handle.net/11511/38022

Journal

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT

DOI

https://doi.org/10.1007/s10064-017-1022-7

Collections

Department of Mining Engineering, Article

Suggestions

OpenMETU
Core

Stochastic geometry model of rock mass fracture network in tunnels Azarafza, Mohammad; Akgün, Haluk; Asghari-Kaljahi, Ebrahim (Geological Society of London, 2018-08-01) Geometric distributions of fractures or discontinuities control the behaviour, and limit the strength and the stability of rock masses where the best stabilization and improvement method for that rock mass could be achieved based on favourable discontinuity geometry. This study introduces an algorithm named 'Stochastic Geometry Model of Fractures Network in Tunnels (SGMFNT)', which was developed with the MA THEMATICA software. The SGMFNT method provides a fractures geometric distribution database to aid dis...
Seismic energy dissipation in deteriorating systems through low-cycle fatigue Erberik, Murat Altuğ; Sucuoğlu, Haluk (Wiley, 2004-01-01) Energy dissipation characteristics of structural members which exhibit both strength and stiffness deterioration under imposed displacement reversals are investigated. In the experimental part, 17 reinforced concrete beam specimens were tested under constant and variable amplitude inelastic displacement cycles. The constant-amplitude tests were employed to determine the low-cycle fatigue behaviour of specimens where the imposed displacement amplitude was the major variable. A two-parameter fatigue model was...
A probabilistic model for the assessment of uncertainties in the shear strength of rock discontinuities DUZGUN, HSB; Yücemen, Mehmet Semih; Karpuz, Celal (Elsevier BV, 2002-09-01) Discontinuity shear strength plays a critical role in many problems encountered in rock engineering, especially in the design of rock slopes. Since its precise estimation is generally not possible, it is crucial that the errors and uncertainties associated with its estimate be quantified and reflected in the design procedure. In this study, the uncertainties underlying discontinuity shear strength are thoroughly examined and an uncertainty analysis model is developed for the estimation of in situ discontinu...
Residual Shear Strength Measured by Laboratory Tests and Mobilized in Landslides Mesri, Gholamreza; Huvaj Sarıhan, Nejan (American Society of Civil Engineers (ASCE), 2012-05-01) Drained residual shear strength measured by multiple reversal direct shear or ring shear tests has been successfully used for over four decades for stability analyses of reactivated landslides in stiff clays and clay shales; A body of literature has accumulated in recent decades, claiming that "healing" or "strength regain" is realized in time on preexisting slip surfaces already at residual condition. In other words, the shear stress required to reactivate a landslide is claimed to be larger than the drain...
Mathematical modeling of horizontal two-phase flow through fully eccentric annuli Ömürlü, Çiğdem; Özbayoğlu, Evren; Department of Petroleum and Natural Gas Engineering (2006) The primary objective of this study is to understand the mechanism, the hydraulics and the characteristics, of the two-phase flow in horizontal annuli. While achieving this goal, both theoretical and experimental works have been conducted extensively. The METU-PETE-CTMFL (Middle East Technical University, Petroleum and Natural Gas Engineering Department, Cuttings Transport and Multiphase Flow Laboratory) multiphase flow loop consists of 4.84 m long eccentric horizontal acrylic pipes having 0.1143m inner dia...

Citation Formats

A. G. Yardımcı and C. Karpuz, “Fuzzy approach for preliminary design of weak rock slopes in lignite mines,” BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT, pp. 253–264, 2018, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/38022.