Passive Haptic Interface with MR-Brakes for Dental Implant Surgery

Date

2011-06-01

Author

Senkal, Doruk
Gurocak, Hakan
Konukseven, Erhan İlhan

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

192
views

0
downloads

In this research a passive haptic interface is explored as a surgical aid for dental implant surgery. The placement of a dental implant is critical since positioning mistakes can lead to permanent damage in the nerves controlling the lips, long lasting numbness, and failure of the implant and the crown on it. Haptic feedback to the surgeon in real time can decrease dependence on the surgeon's skill and experience for accurate implant positioning and increase the overall safety of the procedure. The developed device is a lightweight mechanism with weight compensation. Rotary magnetorheological ( MR) brakes were custom designed for this application using the serpentine flux path concept. The resulting MR-brakes are 33% smaller in diameter than the only commercially available such brakes, yet produce 2.7 times more torque at 10.9 Nm. Another contribution of this research was a ferro-fluidic sealing technique which decreased the of-fstate torque. The control system implemented the passive force manipulability ellipsoid algorithm for force rendering of rigid wall-following tasks. Usability experiments were conducted to drill holes with haptic feedback. The maximum average positioning error was 2.88 mm along the x axis. The errors along the y and z axes were 1.9 mm and 1.16 mm, respectively. The results are on the same order of magnitude as other dental robotic systems. The innovative new MR-brake actuators, inherent safety of the system, and simplicity of control make this passive haptic interface a viable option for further exploration.

Subject Keywords

Control and Systems Engineering, Human-Computer Interaction, Software, Computer Vision and Pattern Recognition

URI

https://hdl.handle.net/11511/38099

Journal

PRESENCE-TELEOPERATORS AND VIRTUAL ENVIRONMENTS

DOI

https://doi.org/10.1162/pres_a_00045

Collections

Department of Mechanical Engineering, Article

Suggestions

OpenMETU
Core

Optimum Design of 6R Passive Haptic Robotic Arm for Implant Surgery Yılmaz, Serkan; Konukseven, Erhan İlhan (2010-07-10) The aim of this research was to design an optimum 6R passive haptic robotic arm (PHRA) to work in a limited workspace during dental implant surgery. Misplacement of an implant during dental surgery causes longer recuperation periods and functional disorders. In this study, a passive guidance robot arm was designed as a surgical aid tool for a dentist during the operation to reduce the surgical complications. Optimum design of a 6R robot is a complex issue since minimum energy has to be consumed while maximu...
Intelligent healthcare monitoring system based on semantically enriched clinical guidelines Laleci, Gökçe Banu; Doğaç, Asuman; Department of Computer Engineering (2008) Clinical guidelines are developed to assist healthcare practitioners to make decisions on a patient's medical problems and as such they communicate with external applications to retrieve patient data, to initiate medical actions through clinical workflows and to transmit information to alert/reminder systems. The interoperability problems in the healthcare IT domain for interacting with heterogeneous clinical workflow systems and Electronic Healthcare Record (EHR) Systems prevent wider deployment of clinica...
Nonlinear elastic material property estimation of lower extremity residual limb tissues Tönük, Ergin (Institute of Electrical and Electronics Engineers (IEEE), 2003-03-01) The interface stresses between the residual limb and prosthetic socket have been studied to investigate prosthetic fit. Finite-element models of the residual limb-prosthetic socket interface facilitate investigation of the mechanical interface and may serve as a potential tool for future prosthetic socket design. However, the success of such residual limb models to date has been limited, in large part due to inadequate material formulations used to approximate the mechanical behavior of residual limb soft t...
Numerical simulation of the effect of time-to-loading on peri-implant bone AKÇA, KIVANÇ; Eer, Atilim; Canay, Senay (Elsevier BV, 2010-01-01) Purpose: To evaluate the effect of time-to-loading on trabecular bone around single-tooth dental implants using numerical solutions based on computer models.
Resorbable PCEC/gelatin-bismuth doped bioglass-graphene oxide bilayer membranes for guided bone regeneration Pazarçeviren, Ahmet Engin; Evis, Zafer; Keskin, Dilek; Tezcaner, Ayşen (IOP Publishing, 2019-05-01) Guided bone regeneration (GBR) is a therapeutic modality applied prior to dental implant placement to increase bone density at the defect site or during placement for directing bone growth around implant. In this study, an asymmetric, bilayer structure was prepared by covalently bonding a dense polycaprolactone-polyethylene glycol-polycaprolactone (PCEC) membrane layer with a hydrogel layer composed of bismuth doped bioactive glass (BG, 45S5) and graphene oxide (GO) particles incorporated in gelatin. Struct...

Citation Formats

D. Senkal, H. Gurocak, and E. İ. Konukseven, “Passive Haptic Interface with MR-Brakes for Dental Implant Surgery,” PRESENCE-TELEOPERATORS AND VIRTUAL ENVIRONMENTS, pp. 207–222, 2011, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/38099.