State-space identification of switching linear discrete time-periodic systems with known scheduling signals

2019-01-01
Uyanik, Ismail
Hamzacebi, Hasan
Ankaralı, Mustafa Mert
In this paper, we propose a novel frequency domain state-space identification method for switching linear discrete time-periodic (LDTP) systems with known scheduling signals. The state-space identification problem of linear time-invariant (LTI) systems has been widely studied both in the time and frequency domains. Indeed, there have been several studies that also concentrated on state-space identification of both continuous and discrete linear time-periodic (LTP) systems. The focus in this study is the family of LDTP systems that switch among a finite set of subsystems triggered by known periodic scheduling signals. We address the state-space identification of such systems in frequency domain using input-output data. We also assume that full state measurements are available for the identification process. The major difference of our study is that we explicitly model the known scheduling signals responsible for switching, which greatly reduces the parametric complexity as well as potentially increases the estimation accuracy by avoiding overfitting. In our identification framework, we gather the Fourier transformations of input-output data, known periodic scheduling signals, and state-space system dimensions and fuse them in a linear regression framework. Later, we estimate the Fourier series coefficients of the time-periodic system and input matrices using a least-squares solution. Finally, we illustrate the effectiveness of our method using a switching LDTP system that is based on the damped Mathieu equation.
TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES

Suggestions

Spectral Mask Compliance and Amplifier Nonlinearity in Single Carrier and OFDM Systems
Koken, Erman; Yılmaz, Ali Özgür (Springer Science and Business Media LLC, 2012-04-01)
In this paper we investige the comparative merits of two transmission techniques, OFDM and single carrier, with respect to spectral mask compliance when a nonlinear amplifier is utilized in transmission. Two different nonlinear power amplifier models are used for analyzing the behavior of the two techniques in terms of average transmitted power and distortion.
Triple stub circuit topology as simultaneous insertion phase, amplitude and impedance control circuit for phased array applications
Unlu, M.; Demir, Şimşek; Akın, Tayfun (Institution of Engineering and Technology (IET), 2012-10-23)
This study shows that the well-known triple stub circuit topology can also be used for controlling the insertion phase and amplitude of a given signal simultaneously, as well as preserving its impedance transformation ability. The triple stub circuit topology, which is nothing but an extension of the conventional double stub loaded-line phase shifter, results in one more degree of freedom to its solution when it is solved for its insertion phase. This additional degree of freedom not only brings the impedan...
Multipath Characteristics of Frequency Diverse Arrays Over a Ground Plane
Cetintepe, Cagri; Demir, Şimşek (Institute of Electrical and Electronics Engineers (IEEE), 2014-07-01)
This paper presents a theoretical framework for an analytical investigation of multipath characteristics of frequency diverse arrays (FDAs), a task which is attempted for the first time in the open literature. In particular, transmitted field expressions are formulated for an FDA over a perfectly conducting ground plane first in a general analytical form, and these expressions are later simplified under reasonable assumptions. Developed formulation is then applied to a uniform, linear, continuous-wave opera...
Hybrid connection of RF MEMS and SMT components in an impedance tuner
Unlu, Mehmet; Topalli, Kagan; Atasoy, Halil Ibrahim; Demir, Şimşek; Aydın Çivi, Hatice Özlem; Akın, Tayfun (Elsevier BV, 2010-01-01)
This paper presents a systematic construction of a model for a hybrid connected RF MEMS and SMT components in a reconfigurable impedance tuner. The double stub hybrid impedance tuner which employs a high number of MEMS switches is selected to demonstrate the feasibility of the connections. In the hybrid tuner, MEMS switches are actuated with DC bias signals, where SMT resistors de-couple RF from the DC lines. The hybrid tuner is realized in two steps, where the MEMS impedance tuner is fabricated on a glass ...
CBFEM-MPI: A Parallelized Version of Characteristic Basis Finite Element Method for Extraction of 3-D Interconnect Capacitances
Ozgun, Ozlem; Mittra, Raj; Kuzuoğlu, Mustafa (Institute of Electrical and Electronics Engineers (IEEE), 2009-02-01)
In this paper, we present a novel, non-iterative domain decomposition method, which has been parallelized by using the message passing interface (MPI) library, and used to efficiently extract the capacitance matrixes of 3-D interconnect structures, by employing characteristic basis functions (CBFs) in the context of the finite element method (FEM). In this method, which is Failed CBFEM-MPI, the computational domain is partitioned into a number of nonoverlapping subdomains in which the CBFs are constructed b...
Citation Formats
I. Uyanik, H. Hamzacebi, and M. M. Ankaralı, “State-space identification of switching linear discrete time-periodic systems with known scheduling signals,” TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES, pp. 2755–2768, 2019, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/39033.