Experimental evaluation of geomembrane/geotextile interface as base isolating system

2018-02-01
Kalpakci, V.
Bonab, A. T.
Özkan, M. Yener
Gülerce, Zeynep
The objective of this study is to evaluate the effect of the geomembrane/geotextile interface on the seismic response of small-to-moderate height structures. Three building models with first-mode natural frequencies changing between 2-4 Hz (representing two, three and four storey structures) were tested with and without the addition of geomembrane/geotextile interface using the shaking table test setup by employing harmonic and modified/ scaled ground motions. Experimental results showed that the geomembrane/geotextile interface significantly reduced the floor accelerations, especially at moderate-to-high ground shaking levels. The interaction between the first-mode natural frequency of the model and the predominant frequency of the input motion is significant, and the interface is most effective when these two frequencies are close to each other. This effect is more clearly seen when the harmonic motions are employed during the tests compared to the modified/scaled ground motions. The results of the tests with modified/ scaled ground motions were used to evaluate the efficiency of the composite liner system in reducing the spectral accelerations in the frequency domain. The results presented here document that the geomembrane/geotextile interface reduces the floor accelerations in a certain frequency range and underline the potential of this interface to be used as a base isolation material.
GEOSYNTHETICS INTERNATIONAL

Suggestions

Seismic Performance Assessment of Unreinforced Masonry Buildings with a Hybrid Modeling Approach
Aldemir, Alper; Erberik, Murat Altuğ; Demirel, I. Ozan; Sucuoğlu, Haluk (SAGE Publications, 2013-02-01)
This study proposes a hybrid modeling approach for the seismic performance assessment of unreinforced masonry buildings. The method combines finite-element and equivalent-frame approaches such that more powerful features of each approach are utilized. The finite-element approach is used to model the masonry components of different geometrical and material characteristics with a high level of accuracy. Then this numerically simulated database is used in the analytical modeling of masonry buildings with equiv...
Optimum design of seismic isolation systems using metaheuristic search methods
ÇERÇEVİK, ALİ ERDEM; Avsar, Ozgur; Hasançebi, Oğuzhan (Elsevier BV, 2020-04-01)
This study addresses the optimum design of seismic isolated structures via metaheuristic search methods. Three recently developed bio-inspired search methods, namely crow search (CSA), whale optimization (WOA) and grey wolf optimizer (GWO), were employed to develop efficient design optimization algorithms for parameter optimization of seismic isolated structures. The developed design optimization algorithms have been applied to optimize a shear frame model with a base isolation system, where the main object...
Practical Implementation of Generalized Force Vectors for the Multimodal Pushover Analysis of Building Structures
Alici, F. Soner; Sucuoğlu, Haluk (SAGE Publications, 2015-05-01)
A practical implementation of generalized multimodal pushover analysis is presented in this study, where the number of pushovers is reduced significantly in view of the number of modes contributing to seismic response. It has been demonstrated in two case studies that the reduced procedure for generalized pushover analysis is equally successful in estimating the maximum member deformations and forces under a ground excitation with reference to nonlinear response history analysis. It is further shown that th...
Key-block based analytical stability method for discontinuous rock slope subjected to toppling failure
Azarafza, M.; Akgün, Haluk; Ghazifard, A.; Asghari-Kaljahi, E. (Elsevier BV, 2020-08-01)
This study introduces a simplified semi-distinct element algorithm for discontinuous rock slopes under toppling instability assessment based on block theory. The presented algorithm is developed to investigate block, flexural and block-flexural types of toppling failures which have been coded in the Python high-level programming language. In order to investigate toppling instabilities for different modes, the three modelling steps, namely, geometrical, behavioural and mechanical simulations were conducted t...
Importance of Degrading Behavior for Seismic Performance Evaluation of Simple Structural Systems
Erberik, Murat Altuğ (Informa UK Limited, 2011-01-01)
This study focuses on effect of degradation characteristics on seismic performance of simple structural systems. Equivalent single degree of freedom systems are used for which the structural characteristics are taken from existing reinforced concrete (RC) frame buildings. Simulation of degrading behavior is achieved by considering actual experimental data. To obtain the seismic response of degrading structural systems, two different approaches are used: inelastic spectral analysis and fragility analysis. Ac...
Citation Formats
V. Kalpakci, A. T. Bonab, M. Y. Özkan, and Z. Gülerce, “Experimental evaluation of geomembrane/geotextile interface as base isolating system,” GEOSYNTHETICS INTERNATIONAL, pp. 1–11, 2018, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/40121.