Alternative HF-free etching solution for aluminum induced texturing of glass surface with improved haze

Date

2019-08-01

Author

Ünal, Mustafa
Turan, Raşit

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

309
views

0
downloads

Aluminum induced texturing (AIT) is a promising surface conditioning method applied on glass substrates. In conventional AIT process, the reaction products (i.e., Al2O3 and Si) are stripped off the glass surface using an HF-based solution, rendering the process sensitive to etch duration. In this study, an alternative, HF-free chemistry is compared to conventional HF-based etching. We show that newly proposed alkaline-based solution leads to significantly improved diffused transmission, of up to 80%. In addition, the etchant does not interact with the glass surface, enabling effective process control.

Subject Keywords

Electronic, Optical and Magnetic Materials, Surfaces, Coatings and Films, Polymers and Plastics, Metals and Alloys, Biomaterials

URI

https://hdl.handle.net/11511/40691

Journal

MATERIALS RESEARCH EXPRESS

DOI

https://doi.org/10.1088/2053-1591/ab2669

Collections

Center for Solar Energy Research and Applications (GÜNAM), Article

Suggestions

OpenMETU
Core

Fabrication of low reflective nanopore-type black Si layer using one-step Ni-assisted chemical etching for Si solar cell application Takaloo, AshkanVakilipour; Kolahdouz, Mohammadreza; POURSAFAR, Jafar; ES, FIRAT; Turan, Raşit; Ki-Joo, Seung (IOP Publishing, 2018-03-01) Nanotextured Si fabricated through metal-assisted chemical etching (MACE) technique exhibits a promising potential for producing antireflective layer for photovoltaic (PV) application. In this study, a novel single-step nickel (Ni) assisted etching technique was applied to produce an antireflective, nonporous Si (black Si) in an aqueous solution containing hydrofluoric acid (HF), hydrogen peroxide (H2O2) and NiSO4 at 40 degrees C. Field emission scanning electron microscope was used to characterize differen...
Novel benzodithiophene type low band gap polymer solar cell application and device stability study with atomic layer deposition encapsulation technique Turkmen, Tulin Ate; Ozturk, Soner; Çırpan, Ali; YERLİ, Yusuf; Aslan, Emre; Mucur, Selin Piravadili; Parlak, Elif Alturk (IOP Publishing, 2019-10-01) Novel benzodithiophene type copolymer was synthesized through a solvent evaporation technique. Poly(5-(5-(4, 8-bis((2-ethylhexyl)oxy)benzo[1,2-b:4, 5-b']dithiophen-2-yl)thiophen-2-yl)-2, 3-bis(3, 4-bis(decyloxy)phenyl)-8-(thiophen-2-yl) quinoxaline) (P-TQTBDT) solar cells were encapsulated with conventional and Atomic Layer Deposition (ALD) techniques. Characterizations of the samples were carried out via nuclear magnetic resonance (NMR), gel permeation chromotagraphy (GPC) and cyclic voltammetry (CV) techn...
A sol-gel derived AgCl photochromic coating on glass for SERS chemical sensor application Volkan, Mürvet; Vo-Dinh, T (Elsevier BV, 2005-05-13) A new optically translucent material has been prepared that acts as a substrate for surface-enhanced Raman spectroscopy. This material is a silica matrix, synthesized by the sol-gel method and containing in situ precipitated AgCl particles which serve as precursors for nanoparticles of elemental silver. Reduction of AgCl to silver nanoparticles is achieved by UV irradiation. The SERS-active medium was distributed on glass supports (cover glass slips, 0.5 turn thick), hence producing thin, sturdy, and optica...
Suitable alkaline for graphene peeling grown on metallic catalysts using chemical vapor deposition KARAMAT, SHUMAİLA; Sonusen, S.; ÇELİK, ÜMİT; UYSALLI, YİĞİT; Oral, Ahmet (Elsevier BV, 2016-04-15) In chemical vapor deposition, the higher growth temperature roughens the surface of the metal catalyst and a delicate method is necessary for the transfer of graphene from metal catalyst to the desired substrates. In this work, we grow graphene on Pt and Cu foil via ambient pressure chemical vapor deposition (AP-CVD) method and further alkaline water electrolysis was used to peel off graphene from the metallic catalyst. We used different electrolytes i.e., sodium hydroxide (NaOH), potassium hydroxide (KOH),...
Characterization and Electrical Conductivity of Poly(ethylene glycol)/Polyacrylonitrile/Multiwalled Carbon Nanotube Composites Aqeel, Salem M.; Kucukyavuz, Zuhal (Wiley, 2011-01-05) Polymer blends based on poly(ethylene glycol), polyacrylonitrile, and multiwalled carbon nanotubes (MWNTs) were prepared by the solvent cast technique from the dispersion of the MWNTs in the concentration range 0-3.45 wt %. The interaction of the MWNTs with the polymer blend was confirmed by a Fourier transform infrared (FTIR) spectroscopy study. The thermal properties of the polymer blend with the MWNTs were carried out by means of differential scanning calorimetry (DSC). It was evident from DSC that the p...

Citation Formats

M. Ünal and R. Turan, “Alternative HF-free etching solution for aluminum induced texturing of glass surface with improved haze,” MATERIALS RESEARCH EXPRESS, pp. 0–0, 2019, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/40691.