Predictive modeling for 5-hydroxymethylfurfural formation by some application conditions of high hydrostatic pressure, namely glucose concentration and application temperature, in high glucose containing model beverages

Date

2018-11-01

Author

Altuner, Ergin Murat
Alpas, Hami

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

57
views

0
downloads

High hydrostatic pressure (HHP) is a nonthermal food processing technology. Many studies have shown that HHP may be used as a process to increase the shelf life of beverages, which are inherently containing glucose or subsequently glucose added. Depending on food processing technologies and storage conditions 5-hydroxymethylfurfural (5-HMF) formation from glucose in foods occurs. There are some limitations about the amount of the 5-HMF present in foods based on World Health Organization and various International Standards, such as European Commission Directive 2007/196/EC. The aim of this study is to present the effect of glucose concentration and HHP in 5-HMF formation in model beverages with different glucose concentrations (10, 40, and 70 g/200 mL). A strong positive correlation was observed between 5-HMF formation and glucose concentration (R = 0.6055) and application temperature (R = 0.6774). Also a predictive analysis model was fitted to the 5-HMF formation response by response surface model (RSM). Practical applications The equation obtained as a model in this study can be used to calculate the formation of 5-HMF for a glucose containing beverages processed by HHP as a response of glucose concentration and application temperature within the conditions of the study. The model was calibrated and validated on glucose containing model beverages, which are representatives of some high glucose containing beverages. HMF content is an important parameter and should be included as one of the quality parameters for commercial beverages. Because of that, this equation has an importance especially for the beverage producers, who process their product by HHP, to predict 5-HMF formation by controlling glucose concentration and HHP treatment conditions. Moreover, developed model can easily be adapted to the standard procedures of academic and industrial applications.

Subject Keywords

Food Science, General Chemical Engineering

URI

https://hdl.handle.net/11511/41235

Journal

JOURNAL OF FOOD PROCESS ENGINEERING

DOI

https://doi.org/10.1111/jfpe.12852

Collections

Department of Food Engineering, Article

Suggestions

OpenMETU
Core

Investigation of dielectric properties of different cake formulations during microwave and infrared-microwave combination baking Sakiyan, Ozge; Şümnü, Servet Gülüm; Sahin, Serpil; Meda, Venkatesh (Wiley, 2007-05-01) Dielectric properties can be used to understand the behavior of food materials during microwave processing. Dielectric properties influence the level of interaction between food and high frequency electromagnetic energy. Dielectric properties are, therefore, important in the design of foods intended for microwave preparation. In this study, it was aimed to determine the variation of dielectric properties of different cake formulations during baking in microwave and infrared-microwave combination oven. In ad...
Inactivation kinetics of Salmonella dublin by pulsed electric field Şensoy, İlkay; SASTRY, SUDHIR (Wiley, 1997-11-01) Microbial inactivation kinetic models are needed to predict treatment dosage in food pasteurization processes. In this study, we determined inactivation kinetic models of Salmonella dublin in skim milk with a co-field flow high voltage pulsed electric field (PEF) treatment system. Electric field strength of 15-40 kV/cm, treatment time of 12-127 mu s, medium temperatures of 10-50C were tested. A new inactivation kinetic model that combines the effect of treatment time to electric field strength or medium tem...
Comparison and modeling of microwave tempering and infrared assisted microwave tempering of frozen potato puree Seyhun, N.; Ramaswamy, H.; Şümnü, Servet Gülüm; Şahin, Serpil; Ahmed, J. (Elsevier BV, 2009-06-01) Microwave tempering and infrared assisted microwave tempering of frozen foods were simulated by using finite difference method. The effects of microwave power and infrared power on tempering were discussed. Three different microwave power levels (30%, 40%, and 50%) and three different infrared power levels (10%, 20%, and 30%) were used. The increase in microwave power level and infrared power level decreased tempering times. The change of heat capacity and the dielectric properties of frozen potato puree wi...
EFFECTIVE THERMAL CONDUCTIVITY OF POTATO DURING FRYING: MEASUREMENT AND MODELING Şahin, Serpil; Bayindirli, L. (Informa UK Limited, 1999-01-01) The effective thermal conductivities of potato were measured at various stages of the frying process. Samples were taken at 30 s intervals during frying, and two different methods (line heat source and modified Fitch method) were used to measure the effective thermal conductivity. An iterative Kopelman model was used for the prediction of thermal properties. The effective thermal conductivity decreased as frying time increased. The variation of experimental measurements by both methods and modeling were wit...
MATHEMATICAL-MODELING OF TRANSIENT HEAT AND MASS-TRANSPORT IN A BAKING BISCUIT OZILGEN, M; HEIL, JR (Wiley, 1994-06-01) Drying behavior of a single baking biscuit was modeled using unsteady state, anisotropic, two dimensional, simultaneous heat and mass balances. Solutions of these equations agreed well with the experimentally determined temperature and the moisture data. Modeling revealed that in the outer sections of the baking biscuit conduction and diffusion were the dominant heat and mass transfer mechanisms, respectively. In the central section of the biscuit the gas cells cracked with the increased vapor pressure and ...

Citation Formats

E. M. Altuner and H. Alpas, “Predictive modeling for 5-hydroxymethylfurfural formation by some application conditions of high hydrostatic pressure, namely glucose concentration and application temperature, in high glucose containing model beverages,” JOURNAL OF FOOD PROCESS ENGINEERING, pp. 0–0, 2018, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/41235.