Fabrication of Ag Nanoparticles Embedded in Al:ZnO as Potential Light-Trapping Plasmonic Interface for Thin Film Solar Cells

Date

2013-09-01

Author

Nasser, Hisham
Saleh, Zaki M.
Ozkol, Engin
Gunoven, Mete
Bek, Alpan
Turan, Raşit

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

117
views

0
downloads

Incident photon conversion efficiency of the absorbing materials at either side of a thin film solar module can be enhanced by integrating a plasmonic interface. Silver nanoparticles represent a good candidate that can be integrated to a thin film solar cell for efficient light-trapping. The aim of this work is to fabricate plasmonically active interface consisting of Ag nanoparticles embedded in Al:ZnO that has the potential to be used at the front surface and at the back reflector of a thin film solar cell to enhance light-trapping and increase the photoconversion efficiency. We show that Ag can readily dewet the Al:ZnO surface when annealed at temperatures significantly lower than the melting temperature of Ag, which is beneficial for lowering the thermal budget and cost in solar cell fabrication. We find that such an interface fabricated by a simple dewetting technique leads to plasmonic resonance in the visible and near infrared regions of the solar spectrum, which is important in enhancing the conversion efficiency of thin film solar cells.

Subject Keywords

Biotechnology, Biophysics, Biochemistry

URI

https://hdl.handle.net/11511/42190

Journal

PLASMONICS

DOI

https://doi.org/10.1007/s11468-013-9562-6

Collections

Department of Physics, Article

Suggestions

OpenMETU
Core

Fabrication of thin crystalline silicon solar cells with advanced light trapping Hadibrata, Wisnu; Yerci, Selçuk; Turan, Raşit; Department of Micro and Nanotechnology (2017) Thin crystalline silicon (c-Si) solar cells with thickness in the order of few tens of microns offer many attractive applications, such as, electronic wearables, space probes and satellites thanks to their flexibility and light-weight character. However, reducing the thickness of active layer of silicon solar cells leads to poor light absorption within the silicon layer, especially in the near infrared region of the solar spectrum. The poor absorption becomes problematic for thin c-Si solar cells as it caus...
High performance focal plane array technologies from short to long wavelength infrared bands Arslan, Yetkin; Beşikci, Cengiz; Department of Electrical and Electronics Engineering (2014) This thesis work covers the development of three different state of the art infrared sensor technologies: quantum well infrared photodetectors (QWIPs), HgCdTe sensors and extended InGaAs photodetectors. QWIP is the leading member of the quantum structure infrared photodetector family providing excellent uniformity and stability with field proven performance. The utilization of the InP/In0.48Ga0.52As multi-quantum well structure (instead of the standard AlGaAs/GaAs material system) for the implementation of ...
Design of a dual polarized low profile antenna for microwave brain imaging Üçel, Kaan; Alatan, Lale; Department of Electrical and Electronics Engineering (2022-5-9) In this thesis, a low profile, low cost, wide band (0.9-2GHz) dual linearly polarized printed dipole antenna is designed to be used in microwave brain imaging systems. Dual polarization feature offers superior data acquisition through polarization diversity for better image quality. Starting from a simple printed dipole, antenna structure is modified step by step to meet these design requirements. Since a conductive surface in close vicinity of the antenna affects antenna performance, in order to obtain uni...
Magnetohydrodynamic flow imaging of ionic solutions using electrical current injection and MR phase measurements Eroglu, Hasan H.; Sadighi, Mehdi; Eyüboğlu, Behçet Murat (Elsevier BV, 2019-06-01) In this study, a method is proposed to image magnetohydrodynamic (MHD) flow of ionic solutions, which is caused by externally injected electrical current to an imaging media, during MRI scans. A multi-physics (MP) model is created by using the electrical current, laminar flow, and MR equations. The conventional spoiled gradient echo MRI pulse sequence with bipolar flow encoding gradients is utilized to encode the MHD flow. Using the MP model and the MRI pulse sequence, relationship between the MHD flow rela...
Development of high fill factor and high performance uncooled infrared detector pixels Küçük, Şeniz Esra; Akın, Tayfun; Department of Electrical and Electronics Engineering (2011) This thesis presents the design, fabrication and characterization of high performance and high fill factor surface micromachined uncooled infrared resistive microbolometer detectors which can be used in large format focal plane arrays (FPAs). The detector pixels, which have a pixel pitch of 25 μm, are designed and fabricated as two-level structures using the enhanced sandwich type resistor while the active material is selected as Yttrium Barium Copper Oxide (YBCO). First level of the pixel structure is allo...

Citation Formats

H. Nasser, Z. M. Saleh, E. Ozkol, M. Gunoven, A. Bek, and R. Turan, “Fabrication of Ag Nanoparticles Embedded in Al:ZnO as Potential Light-Trapping Plasmonic Interface for Thin Film Solar Cells,” PLASMONICS, pp. 1485–1492, 2013, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/42190.