Numerical implementation of magneto-acousto-electrical tomography (MAET) using a linear phased array transducer

2018-02-01
GÖZÜ, Mehmet Soner
ZENGİN, Reyhan
Gençer, Nevzat Güneri
In this study, the performance and implementation of magneto-acousto-electrical tomography (MAET) is investigated using a linear phased array (LPA) transducer. The goal of MAET is to image the conductivity distribution in biological bodies. It uses the interaction between ultrasound and a static magnetic field to generate velocity current density distribution inside the body. The resultant voltage due to velocity current density is sensed by surface electrodes attached on the body. In this study, the theory of MAET is reviewed. A 16-element LPA transducer with 1 MHz excitation frequency is used to provide beam directivity and steerability of acoustic waves. Different two-dimensional numerical models of breast and tumour are formed to analyze the multiphysics problem coupled with acoustics and electromagnetic fields. In these models, velocity current density distributions are obtained for pulse type ultrasound excitations. The static magnetic field is assumed as 1 T. To sense the resultant voltage caused by the velocity current density, it is assumed that two electrodes are attached on the surface of the body. The performance of MAET is shown through sensitivity matrix analysis. The sensitivity matrix is obtained for two transducer positions with 13 steering angles between -30 degrees to 30 degrees with 5 degrees angular intervals. For the reconstruction of the images, truncated singular value decomposition method is used with different signal-to-noise ratio (SNR) values (20 dB, 40 dB, 60 dB and 80 dB). The resultant images show that the perturbation (5 mm x 5 mm) placed 35 mm depth can be detected even if the SNR is 20 dB.
PHYSICS IN MEDICINE AND BIOLOGY

Suggestions

Asynchronous design of systolic array architectures in cmos
İsmailoğlu, Ayşe Neslin; Aşkar, Murat; Department of Electrical and Electronics Engineering (2008)
In this study, delay-insensitive asynchronous circuit design style has been adopted to systolic array architectures to exploit the benefits of both techniques for improved throughput. A delay-insensitivity verification analysis method employing symbolic delays is proposed for bit-level pipelined asynchronous circuits. The proposed verification method allows datadependent early output evaluation to co-exist with robust delay-insensitive circuit behavior in pipelined architectures such as systolic arrays. Reg...
Real-Time Detection of Interharmonics and Harmonics of AC Electric Arc Furnaces on GPU Framework
Uz-Logoglu, Eda; Salor, Ozgul; Ermiş, Muammer (2017-10-05)
In this paper, a method based on the multiple synchronous reference frame (MSRF) analysis is recommended and implemented to detect time-varying harmonics and interharmonics of rapidly fluctuating asymmetrical industrial loads. The experimental work has been carried out on a typical three-phase alternating current arc furnace (AC EAF) installation. In the recommended method, the reference frame is rotated in both directions at speeds corresponding to the positive and negative sequences of all harmonics and a...
Real-Time Detection of Interharmonics and Harmonics of AC Electric Arc Furnaces on GPU Framework
Uz-Logoglu, Eda; Salor, Ozgul; Ermiş, Muammer (2019-11-01)
In this paper, a method based on the multiple synchronous reference frame analysis is recommended and implemented to detect time-varying harmonics and interharmonics of rapidly fluctuating asymmetrical industrial loads. The experimental work has been carried out on a typical three-phase alternating current arc furnace installation. In the recommended method, the reference frame is rotated in both directions at speeds corresponding to the positive and negative sequences of all harmonics and all interharmonic...
CBFEM-MPI: A Parallelized Version of Characteristic Basis Finite Element Method for Extraction of 3-D Interconnect Capacitances
Ozgun, Ozlem; Mittra, Raj; Kuzuoğlu, Mustafa (Institute of Electrical and Electronics Engineers (IEEE), 2009-02-01)
In this paper, we present a novel, non-iterative domain decomposition method, which has been parallelized by using the message passing interface (MPI) library, and used to efficiently extract the capacitance matrixes of 3-D interconnect structures, by employing characteristic basis functions (CBFs) in the context of the finite element method (FEM). In this method, which is Failed CBFEM-MPI, the computational domain is partitioned into a number of nonoverlapping subdomains in which the CBFs are constructed b...
Performance Comparison of Different Sparse Array Configurations for Ultra-Wideband, Near-field Imaging Applications
Cetin, Beyzat Talat; Alatan, Lale (2017-03-24)
The aim of this study is to compare the performance of different multiple-input multiple-output (MIMO) array topologies, intended to be used in ultra-wideband (UWB) near-field imaging applications, by using an analysis method that does not include the effects of image reconstruction algorithm. For this purpose, maximum projection method, previously proposed for the analysis of UWB arrays under far-field conditions, is utilized and modified to obtain two way beam patterns of UWB arrays operating in the near-...
Citation Formats
M. S. GÖZÜ, R. ZENGİN, and N. G. Gençer, “Numerical implementation of magneto-acousto-electrical tomography (MAET) using a linear phased array transducer,” PHYSICS IN MEDICINE AND BIOLOGY, pp. 0–0, 2018, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/42261.