Numerical integration of a class of 3d plastic-damage concrete models and condensation of 3d stress-strain relations for use in beam finite elements

Date

2009-10-01

Author

Sarıtaş, Afşin

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

161
views

0
downloads

This paper presents a method for the integration of a class of plastic-damage material models. The integration of the evolution equations results in a nonlinear problem, which is linearized and solved with the Newton-Raphson method using a sub-stepping strategy. The consistent tangent matrix can be formulated either in terms of the stress components in a general reference system or in terms of the principal stress and strain components with the former then transformed to the general reference system. In order to account for plane stress conditions, the stress-strain relations of the 3d material model are then condensed out. Plane stress conditions are imposed by the linearization of the stresses that need to be set equal to zero; thus the strain fields are updated in the corresponding directions. This solution method is extended to include transverse pressure and the effect of transverse reinforcing steel for a 3d concrete material model. The equilibrium of the stresses in the reinforcing steel and concrete is linearized and the strain fields are updated until the residual satisfies a specified tolerance. The consistent tangent matrix due to the condensation process is derived. The proposed algorithms are tested at the material and element level by comparison of numerical solutions with available experimental data.

Subject Keywords

Civil and Structural Engineering

URI

https://hdl.handle.net/11511/42746

Journal

ENGINEERING STRUCTURES

DOI

https://doi.org/10.1016/j.engstruct.2009.05.005

Collections

Department of Civil Engineering, Article

Suggestions

OpenMETU
Core

Simplified model for computer-aided analysis of integral bridges Dicleli, Murat (American Society of Civil Engineers (ASCE), 2000-08-01) This paper presents a computer-aided approach for the design of integral-abutment bridges. An analysis procedure and a simplified structure model are proposed for the design of integral-abutment bridges considering their actual behavior and load distribution among their various components. A computer program, for the analysis of integral-abutment bridges, has been developed using the proposed analysis procedure and structure model. The program is capable of analyzing an integral-abutment bridge for each con...
Nonlinear Fiber Modeling of Steel-Concrete Partially Composite Beams with Channel Connectors Ozturk, Alper; Baran, Eray; Tort, Cenk (Springer Science and Business Media LLC, 2019-05-01) A simplified nonlinear fiber-based finite element model of steel-concrete partially composite beams utilizing channel type mechanical shear connectors is developed in OpenSees framework. The interaction between steel beam and concrete slab is accounted for by introducing nonlinear zero length elements and rigid links. The channel shear connector response used in numerical models is based on the previously obtained experimental response from pushout tests. Accuracy of the numerical models in predicting the r...
Nonlinear analysis of R/C low-rise shear walls Mansour, Mohamad Y.; Dicleli, Murat; Lee, Jung Yoon (SAGE Publications, 2004-08-01) An analysis method for predicting the response of low-rise shear walls under both monotonic and cyclic loading is presented in this paper. The proposed analysis method is based on the softened truss model theory but utilizes newly proposed cyclic constitutive relationships for concrete and steel bars obtained from cyclic shear testing. The successfulness of the analysis method, when combined with new materials constitutive relationships, is checked against the test results of 33 low-rise shear walls reporte...
Linear static analysis of large structural models on pc clusters Özmen, Semih; Toker, Kurç; Department of Civil Engineering (2009) This research focuses on implementing and improving a parallel solution framework for the linear static analysis of large structural models on PC clusters. The framework consists of two separate programs where the first one is responsible from preparing data for the parallel solution that involves partitioning, workload balancing, and equation numbering. The second program is a fully parallel nite element program that utilizes substructure based solution approach with direct solvers. The first step of data...
Predicting the shear strength of reinforced concrete beams using artificial neural networks Mansour, MY; Dicleli, Murat; Lee, JY; Zhang, J (Elsevier BV, 2004-05-01) The application of artificial neural networks (ANNs) to predict the ultimate shear strengths of reinforced concrete (RC) beams with transverse reinforcements is investigated in this paper. An ANN model is built, trained and tested using the available test data of 176 RC beams collected from the technical literature. The data used in the ANN model are arranged in a format of nine input parameters that cover the cylinder concrete compressive strength, yield strength of the longitudinal and transverse reinforc...

Citation Formats

A. Sarıtaş, “Numerical integration of a class of 3d plastic-damage concrete models and condensation of 3d stress-strain relations for use in beam finite elements,” ENGINEERING STRUCTURES, pp. 2327–2336, 2009, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/42746.