A Dual-Wavelength Pulsed Laser Processing Platform for a-Si Thin Film Crystallization

Date

2019-06-01

Author

Türker, Volkan
Yağcı, Mahmut Emre
Salman, Sarper Haydar
Çınar, Kamil
Eken, Semih Koray
Bek, Alpan

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

153
views

0
downloads

Interest in laser crystallization (LC) of silicon (Si) thin films has been on the rise in fabrication of polycrystalline silicon (pc-Si) based thin/ultrathin photovoltaic solar cells and Si based thin film transistors (TFT). Laser based fabrication of device quality pc-Si thin films at room temperature is expected to be a key enabling technology because of its low energy, material and process time budget. Fabrication of high-quality pc-Si thin films without pre-/post-treatment at large is a disruptive technology which has the potential to revolutionize the Si thin film industry. We hereby describe in detail a multi-wavelength laser processing platform specially developed for crystallization of amorphous silicon (a-Si) thin films into pc-Si thin films. The platform has three main stages. The first stage consists of a nanosecond pulsed ytterbium (Yt3+) doped fibre-laser with a master oscillator power amplifier architecture, operating at a wavelength of 1064 nm with an adjustable repetition rate between 80 kHz–300 kHz. The output beam has a maximum power of 18 W with a pulse energy of 90 µJ. The pulse durations can be set to values between 15 ns–40 ns. The second stage has free-space optical elements for second harmonic generation (SHG) which produces an emission at a wavelength of 532 nm. Conversion efficiency of the SHG is 25% with an output pulse energy of 20 µJ. The platform provides two wavelengths at either 1064 nm or 532 nm in crystallization of a-Si films for different crystallization regimes. The last stage of the platform has a sample processing assembly with a line-focus, which has an x-y motorized stage on a vibration isolated table. Speed of the motorized stage can be set between 1 mm/s–100 mm/s. Stage speed and repetition rate adjustments help to adjust overlap of successive pulses between 97.22–99.99%. Our platform has variety of tune parameters that make it a uniquely flexible system for delicate Si thin film crystallization. A large selection of operational parameter combinations, the wavelength selection and simultaneous x-y scanning capability allow users to crystallize Si films on various substrates optimally. The operation wavelength choice can be done by considering optical absorption and thickness of a-Si films on different types of substrates. Hence, delivering precise amount of absorbed energy in the line-focus irradiation is useful in increasing the average size of crystalline domains; moreover, nucleation of crystallites can be initiated either from the top or bottom interface of the film. Continuous and simultaneous motion of the stage in two dimensions allows to process arbitrary continuous pc-Si geometries in a-Si film. In summary, our multi-wavelength laser processing platform offers all-in-one LC utility for intricate LC-Si processing

Subject Keywords

Laser, Pulsed, Second harmonic generation, Crystallization, Silicon, Thin-film

URI

https://hdl.handle.net/11511/43103

Journal

Instruments

DOI

https://doi.org/10.3390/instruments3020031

Collections

Department of Physics, Article

Suggestions

OpenMETU
Core

Improvement of Laser-Crystallized Silicon Film Quality via Intermediate Dielectric Layers on a Glass Substrate Cinar, Kamil; Karaman, Mehmet; Bek, Alpan (2018-05-01) The laser crystallization (LC) of amorphous silicon thin films into polycrystalline silicon (pc-Si) thin films on glass substrates is an active field of research in the fabrication of Si-based thin film transistors and thin film solar cells. Efforts have been, in particular, focused on the improvement of LC technique. Adhesion promoters of the crystallized Si thin films at the glass interface play a crucial role in the stability and device performance of fabricated structures. The crystalline Si thin films ...
A CMOS COMPATIBLE METAL-POLYMER MICROCHANNEL HEAT SINK FOR MONOLITHIC CHIP COOLING APPLICATIONS Koyuncuoglu, Aziz; Okutucu Özyurt, Hanife Tuba; Külah, Haluk (2010-08-13) A novel complementary metal oxide semiconductor (CMOS) compatible microchannel heat sink is designed and fabricated for monolithic liquid cooling of electronic circuits. The microchannels are fabricated with full metal walls between adjacent channels with a polymer top layer for easy sealing and optical visibility of the channels. The use of polymer also provides flexibility in adjusting the width of the channels allowing better management of the pressure drop. The proposed microchannel heat sink requires n...
Fabrication and doping of thin crystalline Si films prepared by e-beam evaporation on glass substrate Sedani, Salar Habibpur; Turan, Raşit; Ünalan, Hüsnü Emrah; Department of Micro and Nanotechnology (2013) In this thesis study, fabrication and doping of silicon thin films prepared by electron beam evaporation equipped with effusion cells for solar cell applications have been investigated. Thin film amorphous Si (a-Si) layers have been fabricated by the electron beam evaporator and simultaneously doped with boron (B) and phosphorous (P) using effusion cells. Samples were prepared on glass substrates for the future solar cell operations. Following the deposition of a-Si thin film, crystallization of the films h...
Fabrication of thin crystalline silicon solar cells with advanced light trapping Hadibrata, Wisnu; Yerci, Selçuk; Turan, Raşit; Department of Micro and Nanotechnology (2017) Thin crystalline silicon (c-Si) solar cells with thickness in the order of few tens of microns offer many attractive applications, such as, electronic wearables, space probes and satellites thanks to their flexibility and light-weight character. However, reducing the thickness of active layer of silicon solar cells leads to poor light absorption within the silicon layer, especially in the near infrared region of the solar spectrum. The poor absorption becomes problematic for thin c-Si solar cells as it caus...
An Alternative Metal-Assisted Etching Route for Texturing Silicon Wafers for Solar Cell Applications Es, Fırat; Kulakci, Mustafa; Turan, Raşit (2016-03-01) Metal-assisted etching (MAE) can be used to form antireflective and light-trapping structures on crystalline silicon solar cells. This method has been widely used to form nanowires and nanoholes on their surfaces. In this study, the MAE technique with additional hole-injection mechanisms has been investigated to form surface nanostructures with various shapes. The effect of each chemical's percentage, as well as the etching time, has been studied on the surface geometry and optical performance. The average ...

Citation Formats

V. Türker, M. E. Yağcı, S. H. Salman, K. Çınar, S. K. Eken, and A. Bek, “A Dual-Wavelength Pulsed Laser Processing Platform for a-Si Thin Film Crystallization,” Instruments, pp. 31–31, 2019, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/43103.